The Natural Cooling Effects of Pre-heated Substrate during RF Magnetron Sputter Deposition of ZnO

ZnO 박막의 RF 마그네트론 스퍼터 증착 중 미리 가열된 기판의 자연냉각 효과

  • 박성현 (경원대 공대 전기전자공학과) ;
  • 이능헌 (경원대 공대 전기전자공학과)
  • Published : 2007.05.01

Abstract

Crystalline and micro-structural characteristics of ZnO thin films which were deposited on p-Si(100) with cooling naturally down of pre-heated substrate during RF magnetron sputter deposition, were investigated by XRD and SEM in this paper. The film which was prepared on the substrate which was pre-heated to $400^{\circ}C$ before deposition and then cooled naturally down during deposition, showed the most outstanding c-axis preferred orientation. The ZnO thin film having the best crystalline result were applied to SMR type FBAR device and resonance properties of the device were investigated by network analyzer. It showed that resonance frequency was 2.05 GHz, return loss was -30.64 dB, quality factor was 3169 and electromechanical coupling factor was 0.4 %. This deposition method would be very useful for application of surface acoustic wave filter or film bulk acoustic wave resonator.

Keywords

References

  1. F. R. Boom, D. J. Yntema, F. C. M. Van De Pol, M. Flwenspoek. J. H. J. Fluitman and Th. J. A. Popma, 'Thin-film ZnO micro-mechanical actuator at low frequencies', Sensors and Actuators., Vol. A21-A23, p. 226. 1990 https://doi.org/10.1016/0924-4247(90)85044-5
  2. S. Pizzini, N. Butta, D. Narducci, and M. Palladino, 'Thick film ZnO resistive gas sensors', J. Electrochem. Soc., Vol. 136, No. 7, p. 1945, 1989 https://doi.org/10.1149/1.2097092AdditionalInformation
  3. Yasuhiro Igasaki and Hiromi Saito, 'Substrate temperature dependence of electrical properties of ZnO:AI epitaxial films on sapphire(1210)', J Appl. Phys., Vol. 69, No. 4, p. 2190, 1991
  4. H. Nanto, T. Minami, S. Shooii, and S. Takata, 'Electrical and optical properties of zinc oxide thin films prepared by magnetron sputtering for transparent electrode applications', J. Appl. Phys., Vol. 55, No. 4, p. 1029, 1984 https://doi.org/10.1063/1.333196
  5. R. Wang, L. L. H. King, and Arthur W. Sleight, 'Highly conducting transparent thin films based on zinc oxide', J. mater. Res., Vol. 11, No 7, p. 1659, 1996 https://doi.org/10.1557/JMR.1996.0251
  6. T. Shiosaki, S. Ohnishi and A. Kawabata, 'Optical properties of single-crystal-line ZnO film smoothly CVD on intermediately sputtered thin ZnO film on Sapphire', J. Appl. Phys., Vol. 50, No. 5, p. 3113, 1979
  7. S. Maniv and A. Zangvil. 'Controlled texture of reactively RF sputtered ZnO thin film', J. Appl. Phys., Vol. 49, p. 2787, 1978 https://doi.org/10.1063/1.325158
  8. 이종덕, 송준태, 'PR magnetron sputtering 법으로 ZnO 박막 제조시 기판온도에 따른 c축 배향성에 관한 연구', 전기전자재료학회 논문지, Vol. 9. No. 2, p. 196. 1996
  9. 최형욱, 김경환, 김상종, 강종윤, 안병국, 윤석진, 'RF 마그네트론 스퍼터링에 의한 SAW 필터용 ZnO 압전박막에 관한 연구', 전기전자재료학회 논문지, Vol. 15. No.9, p. 798, 2002
  10. 이승환, 성영권, 김종관, 'Magnetron sputtering으로 증착한 ZnO 박막의 특성과 열처리에 따른 비저항과 미세구조', 전기전자재료학회 논문지, Vol. 10. No. 2. p. 126, 1997
  11. 박성현, 추순남, 이능헌, '압전층의 2단 증착법을 이용한 체적 음향파 박막형 공진기의 제작과 성능향상에 관한 연구', 대한전기학회 논문지, Vol. 54C. No. 7. p. 308, 2005
  12. 신영화, 권상직, 김형준, 'FBAR 소자제작을 위한 ZnO 박막 증착 및 특성', 전기전자재료학회 논문지, Vol. 18, No. 2, p. 159, 2005 https://doi.org/10.4313/JKEM.2005.18.2.159
  13. 신영화, 권상직, 윤영수, 'ALD와 RF 마그네트론 스퍼터링을 이용한 FBAR 소자의 ZnO 박막증착 및 특성', 전기전자재료학회 논문지, Vol. 18. No. 2, p. 164, 2005 https://doi.org/10.4313/JKEM.2005.18.2.164