참고문헌
- Chen, P. H. and Goldstein, R. J., 1992, 'Convective Transport Phenomena on the Suction Surface of a Turbine Blade Including the Influence of Secondary Flows Near the Endwall,' ASME J. of Turbomachinery, Vol. 114, pp. 776-787 https://doi.org/10.1115/1.2928031
- Goldstein, R. J., Wang, H. P. and Jabbari, M. Y., 1994, 'The Influence of Secondary Flows near the Endwall and Boundary Layer Disturbance on Convective Transport from a Turbine Blade,' ASME Paper No. 94-GT-165
- Han, J. C., Zhang, L. and Ou, S., 1993, 'Influence of Unsteady Wake on Heat Transfer Coefficient From aGas Turbine Blade,' ASME J. of Heat Transfer, Vol. 115, pp. 904-911 https://doi.org/10.1115/1.2911386
- Arts, T., Duboue, J.-M. and Rollin, G., 1998, 'Aerothermal Performance Measurements and Analysis of a Two-dimensional High Turning Rotor Blade,' ASME J. of Turbomachinery, Vol. 120, pp. 494-499 https://doi.org/10.1115/1.2841745
- Blair, M. F., 1994, 'An Experimental Study of Heat Transfer in a Large-scale Turbine Rotor Passage,' ASME J. of Turbomachinery, Vol. 116, pp. 1-13 https://doi.org/10.1115/1.2928273
- Kwak, J. S. and Han, J. C., 2003, 'Heat Transfer Coefficients on the Squealer Tip and Near Squealer Tip Regions of a Gas Turbine Blade,' ASME J. of HeatTransfer, Vol. 125, pp. 669-677 https://doi.org/10.1115/1.1571849
- Jin, P. and Goldstein, R. J., 'Local Mass/Heat Transfer on Turbine Blade Near-Tip Surface,' ASME Paper No. GT-2002-30556
- Kwon, H. G., Lee, S. W. and Park, B. K., 2002, 'Measurements of Heat (Mass) Transfer Coefficient on the Surface of a Turbine Blade with a High Turning Angle Using Naphthalene Sublimation Technique,' Trans. of the KSME B, Vol. 26, pp. 1077-1087 https://doi.org/10.3795/KSME-B.2002.26.8.1077
- Rhee, D. H. and Cho, H. H., 2005, 'Heat/Mass Transfer Characteristics on Stationary Turbine Blade and Shroud in a Low Speed Annular Cascade (I) - Near-tip Blade Surface,' Trans. of the KSME B, Vol. 29, No. 4, pp. 485-494 https://doi.org/10.3795/KSME-B.2005.29.4.485
- Rhee, D. H. and Cho, H. H., 2005, 'Heat/Mass Transfer Characteristics on Stationary Turbine Blade and Shroud in a Low Speed Annular Cascade (II) - Tipand Shroud,' Trans. of the KSME B, Vol. 29, No. 4, pp. 495-503 https://doi.org/10.3795/KSME-B.2005.29.4.495
- Kwak, J. S. and Han, J. C., 2003, 'Heat Transfer Coefficients and Film-Cooling Effectiveness on a Gas Turbine Blade Tip,' ASME J. of Heat Transfer, Vol. 125,2003, pp. 494-502 https://doi.org/10.1115/1.1565096
- Ahn, J. Y., Mhetras, S., Han, J. C., 2004, 'Film-Cooling Effectiveness on a Gas Turbine Blade Tip Using Pressure Sensitive Paint,' ASME Paper No. GT2004-53249
- Mhetras, S., Yang, H., Gao, Z. and Han, J. C., 2005, 'Film-Cooling Effectiveness on Squealer Rim Walls and Squealer Cavity Floor of a Gas Turbine Blade Tip Using Pressure Sensitive Paint,' ASME Paper No. GT2005-68387
- Rhee, D. H. and Cho, H. H., 2005, 'Effect of Relative Position of Vane and Blade on Heat/Mass Transfer Characteristics on Stationary Turbine Blade Surface,' Fluid Engineering Journal, Vol. 8, No. 4, pp. 27-38 https://doi.org/10.5293/KFMA.2005.8.4.027
- Rhee, D. H. and Cho, H. H., 2006, 'Effect of Vane/Blade Relative Position on Heat/Mass Transfer Characteristics on the Tip and Shroud for Stationary Turbine Blade,' Trans. of the KSME B, Vol. 30, No. 5, pp. 446-456 https://doi.org/10.3795/KSME-B.2006.30.5.446
- Guenette, G. R., Epstein, A. H., Norton, R. J. G.. and Yuzhang, C., 1985, 'Time Resolved Measurements of a Turbine Rotor Stationary Tip Casing Pressure and Heat Transfer Field,' AIAA Paper No. 85-1220
- Guenette, G. R., Epstein, A. H., Giles, M. B., Haimes, R. and Norton, R. J. G., 1989, 'Fully Scaled Transonic Turbine Rotor Heat Transfer Measurements,' ASME J. of Turbomachinery, Vol. 111, pp. 1-7 https://doi.org/10.1115/1.3262231
- Abhari, R. S. and Epstein, A. H., 1994, 'An Experimental Study of Film Cooling in a Rotating Transonic Turbine,' ASME J. of Turbomachinery, Vol. 116, pp. 63-70 https://doi.org/10.1115/1.2928279
- Haldeman, C. W. and Dunn, M. G., 2004, 'Heat Transfer Measurements and Predictions for the Vane and Blade of a Rotating High-Pressure Turbine Stage,' ASME J. of Turbomachinery, Vol. 126, pp. 101-109 https://doi.org/10.1115/1.1626132
- Metzger, D. E., Dunn, M. G. and Hah, C., 1991, 'Turbine Tip and Shroud Heat Transfer,' ASME J. of Turbomachinery, Vol. 113, pp. 502-507 https://doi.org/10.1115/1.2927902
- Dunn, M. G. and Haldeman, C. W., 2000, 'Time-Averaged Heat Flux for a Recessed Tip, Lip, and Platform of a Transonic Turbine Blade,' ASME J. of Turbomachinery, Vol. 122, pp. 692-698 https://doi.org/10.1115/1.1311285
- Polanka, M. D., Clark, J. P., White, A. L., Meininger, M. and Praisner, T. J., 2003, 'Turbine Tip and Shroud Heat Transfer and Loading Part B: Comparisons between Prediction and Experiment Including Unsteady Effects,' ASME Paper No. GT-2003-38916
- Goldstein, R. J. and Cho, H. H. 1995, 'A Review of Mass Transfer Measurements Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 https://doi.org/10.1016/0894-1777(94)00071-F
- Eckert, E.R.G., Sakamoto, H. and Simon, T. W., 2001, 'The Heat and Mass Transfer Analogy Factor, Nu/Sh, for Boundary Layers on Turbine Blade Profiles,' International Journal of Heat and Mass Transfer, Vol. 44, pp. 1223-1233 https://doi.org/10.1016/S0017-9310(00)00175-7
- Kline, S. J. and McClinetock, F., 1953, 'Describing Uncertainty in Single Sample Experiments,' Mech. Eng., Vol. 75, pp. 3-8
피인용 문헌
- vol.11, pp.1, 2008, https://doi.org/10.5293/KFMA.2008.11.1.089