DOI QR코드

DOI QR Code

Study on the Rotating Motion of a Piston Pin of Full Floating Type

비고정식 피스톤 핀의 회전운동에 관한 연구

  • 전상명 (호서대학교 자동차공학과)
  • Published : 2007.06.30

Abstract

In recently designed diesel engines, the running conditions for piston pin bearings have become very severe due to combustion pressure and temperature increase. Moreover, the lead removal from the bush material has strongly reduced the capability of the anti friction material to accept asperity contacts. In this paper, before trying to find the pressure distributions on the oil film of piston pin bearings by the unsteady two dimensional thermohydrodynamic lubrication analysis in order to do the optimum design of the bearings of piston pin, it will be investigated the tendancy of piston pin rotating motion by calculating the friction coefficient at piston pin bearings, the oil film thickness and the frictional torques induced by hydrodynamic shear stress.

Keywords

References

  1. D. Fletcher-Jones, D. R. Adams, E. M. Barraclough and J. C. Avezou (1986), 'Optimization of Piston Pin Hole Shape,' AE Technical Symposium 1986, Paper No. 31
  2. D. C. Bates, P. Maurat and L. Bruni (1990), 'Gasoline Piston and Pin Design for the 1990s,' AE Technical Symposium 1990, Paper No. 14
  3. M. Takiguchi, M. Oguri and T. Someya (1993), 'A Study of Rotating Motion of Piston Pin in Gasoline Engine,' JSAE Proceedings, May 1993, JSAE Paper 9303005, pp. 141-144
  4. K. Tomita, K. Nagasawa, M. Takiguchi, T. Someya and Y. Tazaki (1994), 'A Study of Rotating Motion of Piston Pin in Gasoline Engine,' JSAE Proceedings, Apr. 1994, JSAE Paper 9433704, pp. 25-28 (Abstract: JSAE Review, Vol. 15, No.3, pp. 276.)
  5. T. Suhara, T. Takei and M. Takiguti (1996), 'Characteristics of Friction Force on Piston Pin Boss Bearings,' JSAE Proceedings, Apr. 1996, JSAE Paper 9633892, pp. 65-68
  6. T. Suhara, T. Takei, S. Ato, M. Takiguchi and S. Furuhama (1997), 'Characteristics of Friction Force on Piston Pin Boss Bearings,' SAE 0968195
  7. T. Suhara, S. Ato and M. Takiguchi (1997), 'Friction and Lubrication Characteristics of Piston Pin Boss Bearings of an Automotive Engine,' SAE 0970840 (SP-1245), pp. 83-90
  8. M. Takiguchi, T. Suhara, T. Someya and S. Furuhama (1998), 'Reduction of Friction for Piston Pin Boss Bearing of Automotive Gasoline Engine by Utilizing Oil Around the Boss,' ASME-Publication-ICE, Vol. 30, No.2, pp. 99-105
  9. T. Kira, H. Yokota, S. Kamiya and Y. Kitagawa (1999), 'Development of Piston Pin Bushing Material for High Performance Engine,' SAE 1999-010826, SAE 1999 International Congress and Exposition, Detroit, Michigan, USA, March 1-4
  10. M. Takiguchi, Y. Aoki and K. Fujii (2000), 'Effects of Piston Pin Deformation Lubrication Characteristics at Pin Boss Bearing,' ASME-Publication-ICE, Vol. 34, No.1, pp. 139-146
  11. Y. Mihara and T. Someya (2002), 'A Study on the Measurement of Oil-film Pressure in Engine Connecting Rod Bearing and Piston Pin-Boss by Thin-film Sensor,' ASIATRIB 2002 International Conference, Jeju Island, Korea, Oct. 21-24, pp. 409-410
  12. Y. Mihara, K. Sekine and T. Someya (2003), 'Study on the Development of a Thin-film Sensor for Measuring Oil-film Pressure in Engine Bearing and Piston Pin-boss,' Tribology Series(Leeds), Amsterdam; Boston; Elsevier, pp. 391-402
  13. T. Someya and Y. Mihara (2005), 'Engine Tribology by Means of New Thin-Film Sensors,' KSTLE 2005 Automotive Tribology International Symposium and 40th Spring Conference, Kwangju, Chosun Univ., June 16-17, Vol. 1, pp. 3-23
  14. J. L. Ligier and P. Ragot (2005), 'Piston Pin: Wear and Rotating Motion,' SAE International, SAE 2005 -01-1651 (SP-1964), pp. 760-768
  15. A. Cameron (1981), Basic Lubrication Theory, 3rd Edition, Chapter. 8, pp. 126-136
  16. P. C. Warner (1963), 'Static and Dynamic Properties of Partial Journal Bearings,' J. of Basic Engineering, Trans. ASME, Series D, Vol. 85, 1963, p. 247 https://doi.org/10.1115/1.3656569
  17. P. K. Goenka (1984), 'Analytical Curve Fits for Solution Parameters of Dynamically Loaded Journal Bearings,' J. of Reibology, Trans. ASME, Vol. 106, pp. 421-428 https://doi.org/10.1115/1.3260950
  18. J. F. Booker (1965), 'Dynamically Loaded Journal Bearing; Mobility Method of Solution,' J. of Basic Engineering, Trans. ASME, Series D, Vol. 87, pp. 537-546 https://doi.org/10.1115/1.3650602