Tribology and Lubricants

  • 제23권3호
  • /
  • Pages.83-88
  • /
  • 2007
  • /
  • 2713-8011(pISSN)
  • /
  • 2713-802X(eISSN)
한국트라이볼로지학회 (Korean Tribology Society)
권호 표지
DOI QR코드

DOI QR Code

스크롤 압축기 저어널 회전축의 궤적 계산 및 측정

Analyses and Measurements of Rotational Accuracy for Journal Shaft in a Scroll Compressor

  • 박상신 (영남대학교 기계공학부) ;
  • 김규하 (광주과학기술원 기전공학과) ;
  • 이진갑 (경기공업대학 자동화시스템과)
  • Park, Sang-Shin (School of Mechanical Engineering, Yeungnam University) ;
  • Kim, Gyu-Ha (Graduate School, Dept. of Mechatronics, Gwangju Institute of Science and Technology) ;
  • Lee, Jin-Kab (Dept. of Automation Systems, Kyonggi Institute of Technology)
  • 발행 : 2007.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents measurement processes of rotational accuracy and comparison of theoretical values in the main bearing of scroll compressor. The main bearing is a type of oil journal bearing, but it has an axial or helical groove. The generalized coordinate system method, which can handle this groove, is applied to calculate the pressure profile in the journal bearing. The orbits of journal shaft are calculated corresponding to the compressed gas forces and bearing reaction forces. Then, the orbits are measured using three-point method. The results are compared to that from analyses.

키워드

참고문헌

  1. William A. Gross, 'Fluid Film Lubrication,' John Willey&Sons, New York, 1980
  2. 박상신, 김영진, 유송민, '일반좌표계 변환을 이용한 헤링본 그루브 베어링의 해석,' 한국 윤활학회지, 제 16권, 제6호, 2000
  3. 三井公之, '精度診斷技術部硏究(3占式主軸回轉精度測定装置開發),'日本機械學會論文集 C編, 48권525호, pp. 115-123, 1982
  4. Y. C. Park, 'A Digital Measurement System for Spindle Accuracy,' MS. Thesis KAIST, 1988
  5. S. Park,'Analytical and Experimental Study on the Dynamic Characteristics of Air Bearings for the Ultra Precision Diamond Turnig Machine,' Ph.D Thesis, Seoul National Univ.,1995
  6. Kawabata, N., 'A Study on the Numerical Analysis of Fluid Film Lubrication by the Boundary-Fitted Coordinates System (The Case of Steady Gas-Lubrication),' JSME Int. J., Series III, Vol.32, No.2, pp. 281-288, 1989
  7. Kawabata, N., Ashino, I. And Tachibana, M. 'A useful Numerical Analysis Method for the Dynamic Characteristics of Fluid Film Lubrication(The Case of Incompressible Fluid Lubrication), JSME Int. J., Series III, Vol.34, No.1, pp. 91-96,1989
  8. S. H. Lee, S. C. Jung, I. B. Chang, D. C. Han, 'A Study on the Measurement Characteristics of Cylindrical Type Capacitive Transducers to the Roundness Errors of Rotors for Magnetic Bearing,' J. of KSPE, Vol. 12, No.3, pp. 23-31,1995

피인용 문헌

  1. 회전체 동역학 및 트라이볼로지 요소의 연구동향 vol.11, pp.1, 2008, https://doi.org/10.5293/kfma.2008.11.1.100