Journal of the Korean Society of Safety (한국안전학회지)

The Korean Society of Safety (한국안전학회)
권호 표지

Theoretical Analysis of Geared Dynamic Characteristics in a Torsional System

회전 시스템 내 기어 동역학적 특성에 대한 이론적 해석

  • Cho, Sung-Min (Graduate School of Division of Mechanical & Aerospace Engineering, Gyeongsang National University) ;
  • Ahn, Min-Ju (Graduate School of Division of Mechanical & Aerospace Engineering, Gyeongsang National University) ;
  • Son, Yu-Sun (Graduate School of Division of Mechanical & Aerospace Engineering, Gyeongsang National University) ;
  • Yoon, Jong-Yun (Department of Mechanical Engineering, Ohio State University) ;
  • Lyu, Sung-Ki (Division of Mechanical & Aerospace Engineering, Gyeongsang National University (ReCAPT(K-MEM R&D Cluster)))
  • 조성민 (경상대학교 대학원 기계항공공학부) ;
  • 안민주 (경상대학교 대학원 기계항공공학부) ;
  • 손유선 (경상대학교 대학원 기계항공공학부) ;
  • 윤종윤 (오하이오주립대학교 기계공학과) ;
  • 류성기 (경상대학교 기계항공공학부(항공기부품기술연구소-지식기반기계부품소재연구개발클러스터사업단))
  • Published : 2007.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

In the field of the system dynamics related to the vibration characteristics, there are lots of examples introduced for the translational system, however the analysis of the torsional systems such as driveline in the automobile is rare compared with the translational system. The purpose of this study is to show the simple concepts for the torsional system analysis and explain how to adjust the mathematical methods for the geared motions, which can be applied to the driveline of the automobile. In order to do it, there are several systematical approaches described about how the sub-system motions can be understood with the mathematical descriptions. Based upon this fundamental study, several torsional system modeling methods will be suggested. Therefore, the characteristics of the torsional system and the gear motions will be explained, which can be adjusted in a further study as a next step.

Keywords

References

  1. P. Couderc, J. Callenaere, J. D. Hagopian and G. Ferraris, Vehicle Driveline Dynamic Behavior: Experimentation and Simulation, Journal of Sound and Vibration, Vol. 218, No. 1, pp. 133-157, 1998 https://doi.org/10.1006/jsvi.1998.1808
  2. J. P. Den Hartog, Mechanical Vibrations, Dover, pp. 351-353, 1999
  3. C.L. Gaillard and R. Singh, Dynamic analysis of automotive clutch dampers, Applied Acoustics, 60 (2000), pp. 399-424, 1997 https://doi.org/10.1016/S0003-682X(00)00005-0
  4. T. C. Kim and R. Singh, Dynamic Interactions between Loaded and Unloaded Gear, SAE Noise and Vibration Conf. pp. 158-165, 01NVC-100, April- May 2001
  5. R. Singh, H. Xie and R. J. Comparin, Analysis of Automotive Neutral Gear Rattle, Journal of Sound and Vibration, Vol. 131, No. 2, pp. 177-196, 1989 https://doi.org/10.1016/0022-460X(89)90485-9
  6. E. P. Trochon and R. Singh, Effect of Automotive Gearbox Temperature on Transmission Rattle Noise, Noise-Con, pp. 151-156, 1998
  7. E. P. Trochon, Analytical Formulation of Automotive Drivetrain Rattle Problems, MS Thesis, The Ohio State University, 1997
  8. J. Y. Yoon, Effect of Multi-Staged Clutch Damper Characteristics on Vibro-Impacts within a Geared System, MS Thesis, The Ohio State University, 2003