Abstract
[ $Bi_2Sr_2Ca{_{n-1}}Cu_nO_x$ ](n=0,1,2) thin fans have been fabricated by co-deposition at an ultra-low growth rate using ion beam sputtering(IBS) method. Bi 2212 phase appeared in the temperature range of 750 and $795^{\circ}C$ and single phase of Bi 2201 existed in the lower region than $785^{\circ}C$. Whereas, $PO_3$ dependance on structural formation was scarcely observed regardless of the pressure variation. And high quality of c-axis oriented Bi 2212 thin film with $T_c$(onset) of about 90 K and $T_c$(zero) of about 45 K is obtained. Only a small amount of CuO in some films was observed as impurity, and no impurity phase such as $CaCuO_2$ was observed in all of the obtained films.
이온 빔 스퍼터법을 이용하여 저속성장으로 동시 증착에 의해 $Bi_2Sr_2Ca{_{n-1}}Cu_nO_x$(n=0,1,2) 박막을 제작하였다. Bi 2212 상은 기판온도 $750{\sim}795^{\circ}C$의 범위에서 나타났으며, $750^{\circ}C$보다 저온 측에서는 Bi 2201의 단일상이 존재하였다. 그러나, 조성과 관계되는 $PO_3$은 압력 변화에 대해서는 관찰되지 않았다. 그리고 $45{\sim}90K$의 임계온도(Tc)를 갖는 c축 배향한 고품질의 Bi 2212 박막을 얻었다. 소수의 박막에서는 소량의 CuO가 불순물로 관찰되었으며, 얻어진 모든 박막에서 $CaCuO_2$ 의 불순물 상은 관찰되지 않았다.