DOI QR코드

DOI QR Code

FeSiBNb 리본 합금의 비정질 형성능과 자기적 특성에 미치는 Co의 첨가 효과

The Effects of Co Addition on Glass Forming Ability and Magnetic Properties for FeSiBNb Ribbon Alloys

  • 이태규 (안동대학교 공과대학 신소재공학부) ;
  • 노태환 (안동대학교 공과대학 신소재공학부)
  • Lee, Tae-Gyu (School of Advanced Materials Engineering, Andong National University) ;
  • Noh, Tae-Hwan (School of Advanced Materials Engineering, Andong National University)
  • 발행 : 2007.06.30

초록

큰 비정질 형성능을 가지는 FeSiBNb 비정질 리본 합금의 열적 및 자기적 특성에 미치는 Co의 첨가 효과에 대하여 연구되었다. 두께 $40\;{\mu}m$의 비정질$(Fe_{1-X}Co_X)_{72}Si_4B_{20}Nb_4(x=0{\sim}0.5)$ 합금에 대한 열분석 결과, Fe에 대한 Co의 치환량이 증가할수록 과냉각 액상의 존재 온도 범위가 넓어져 비정질 형성능이 증가하는 것으로 평가되었다. 또 Co 농도의 증가에 따라 약간의 $B_8$(800A/m에서의 유도 자속밀도)의 감소가 얻어지나, 투자율이 현저하게 증가하고 철손이 크게 감소하는 경향을 나타내었다. 한편 두께가 두꺼운 상기 비정질 합금의 교류 투자율의 주파수 특성은 와전류에 의한 표피 효과의 증대 때문에 $20\;{\mu}m$ 정도의 두께를 가지는 통상의 비정질 리본 합금에 비해 열화되는 것으로 나타났다.

The thermal and magnetic properties of amorphous (FeCo)SiBNb ribbon alloys with high glass forming ability have been investigated. The glass forming ability was enhanced by Co substitution in amorphous ($Fe_{1-X}Co_X)_{72}Si_4B_{20}Nb_4$ alloys with the thickness of about $40{\mu}m$. With the increase in Co content, the temperature range of supercooled liquid phase increased indicating the high glass forming ability of the Co-added alloys. Further the ac permeability increased, and the core loss decreased considerably by Co substitution, while small change in $B_8$ (magnetic flux density at 800 A/m) was observed. The frequency characteristics of permeability deteriorated as compared to conventional amorphous ribbon alloys with the thickness of about $20\;{\mu}m$ due to the increased skin effect.

키워드

참고문헌

  1. F. E. Luborsky (ed.), Amorphous Metallic Alloys, Butterworths, London (1983) pp. 187-486
  2. H. H. Liebermann (ed.), Rapidly Solidified Alloys, Marcel Dekker, New York (1993) pp. 617-754
  3. A. Pecker and W. L. Johnson, Appl. Phys. Lett., 63, 2342 (1993) https://doi.org/10.1063/1.110520
  4. T. D. Shen and R. B. Schwarz, Appl. Phys. Lett., 75, 49 (1999) https://doi.org/10.1063/1.124273
  5. Z. P. Lu, C. T. Liu, J. R. Thompson, and W. D. Porter, Phys. Rev. Lett., 92, 245503-1 (2004) https://doi.org/10.1103/PhysRevLett.92.245503
  6. V. Ponnambalam and S. Joseph Poon, J. Mater. Res., 19, 1320 (2004) https://doi.org/10.1557/JMR.2004.0176
  7. A. Inoue, Acta. Mater., 48, 279 (2000) https://doi.org/10.1016/S1359-6454(99)00300-6
  8. A. lnoue and B. Shen, Mater. Trans., 43, 766 (2002)
  9. B. Shen, A. Inoue, and C. Chang, Appl. Phys. Lett., 85, 4911 (2004) https://doi.org/10.1063/1.1827349
  10. K. Amiya, A. Urata, N. Nishiyama, and A. Inoue, Mater. Trans., 45, 1214 (2004) https://doi.org/10.2320/matertrans.45.1214
  11. B. Shen and A. Inoue, J. Mater. Res., 19, 2549 (2004) https://doi.org/10.1557/JMR.2004.0360
  12. B. Shen and A. Inoue, J. Mater. Res., 20, 1 (2004) https://doi.org/10.1557/JMR.2005.0001
  13. K. Amiya, A. Urata, N. Nishiyama, and A. Inoue, J. Appl. Phys., 97, 10F913-1, (2005)
  14. 近角聰信, 磁氣(實驗物理學講座 17), 共立出版, 東京 (1968) p. 421
  15. M. Hagiwara, A. Inoue, and T. Masumoto, Sci. Rep. Res. Inst. Tohoku Univ., A29, 351 (1981)
  16. 노태환, 자성재료학, 두양사, 서울 (2006) pp. 391-399