Characterization of Crack Aperture in Weak Bedrock for Optimum Grouting Method

불량암반에서의 최적 그라우트 주입을 위한 암반 간극 특성 연구

  • Kim, Jong-Tae (Dept. of Earth & Environmental Sciences, Andong National University) ;
  • Kang, Seon-Mi (Dept. of Earth & Environmental Sciences, Andong National University) ;
  • Choo, Chang-Oh (Dept. of Earth & Environmental Sciences, Andong National University) ;
  • Lee, Sang-Eun (Dept. of Mineral and Energy Resources Engineering, Kangwon National University) ;
  • Jeong, Gyo-Cheol (Dept. of Earth & Environmental Sciences, Andong National University)
  • 김종태 (안동대학교 지구환경과학과) ;
  • 강선미 (안동대학교 지구환경과학과) ;
  • 주창오 (안동대학교 지구환경과학과) ;
  • 이상은 (강원대학교 에너지자원공학과) ;
  • 정교철 (안동대학교 지구환경과학과)
  • Published : 2007.06.30

Abstract

The purpose of this paper is to make a close inquiry into the relationship between width and length of crack as a method to maximize compensation effect by grouting discontinuity within weak bedrock, together with emphasis on application of the basic data to the reformation of weak bedrock in a construction site. The result reveals that the length of trace at each fracture averages $1.5{\sim}3.0mm$. Based on analysis of openness distribution pattern at each fracture, the estimated values are quite well in agreement with those of the experiment, with a negative trend in the distribution of aperture width.

이 논문은 연약암반 내 불연속면 내에서의 그라우트에 의한 보강효과를 극대화하기 위한 하나의 방법으로써 균열의 간극 폭과 길이를 규명하는 것으로 암반을 대상으로 한 건설공사에서 연약암반 개량의 기초자료로 활용하게 함에 그 목적이 있다. 결과는 각 균열에서의 평균 트레이스 길이는 $1.5{\sim}3.0mm$ 범위로 나타난다. 이들 각 균열에서의 재구성 분포 성상의 해석결과 간극 폭의 추정치가 실험치와 잘 일치하고 간극 폭의 분포성상에 있어서 추정치가 음의 경향을 갖는다.

Keywords

References

  1. 이희석, 1999, 주기전단 하중하의 암석 절리의 역학적 및 수리학적 거동 연구, 서울대학교 대학원 박사학위 논문, pp. 37-40
  2. Barenblatt,G.I., Zhenltove,Iu.P., Kochina, N., 1960, Basics concepts in the theory of seepage of homogenous liquids in fractured rocks., Prikl.Mat.Mekh., 24, 5, pp.852-864
  3. Gale, J. E., 1977, Comparison of coupled fracture deformation and fluid flow models with direct measurements of fracture pore structure and stress-flow properties, Proc. 28th U. S. Symp. on Rock Mechanics, pp. 1213-1222
  4. Gentier, S., Billaux, D. and Van Vliet, L., 1989, Laboratory testing of the voids of a fracture, Rock Mech. Rock Eng., Vol. 22, pp. 149-157 https://doi.org/10.1007/BF01583959
  5. Hakami, E. and Stephansson, O., 1993, Experimental technique for aperture studies of intersecting joints, Eurock '93, Proc. ISRM Int. Symp. on Safety and Environmental Issures in Rock Eng., Lisbon, pp. 301-308
  6. Hakami, E., and Larsson, E., 1996, Aperture Measurements and Flow Experiments on a Single Natural Fracture, Int. J. Rock Mech. Min. Sci. &. Geomech. Abstr. Vol. 33. No. 4, pp. 395-404 https://doi.org/10.1016/0148-9062(95)00070-4
  7. Pyrak-Nolte, L. T. Myer, L. R., Cook, N. G. W. and Witherspoon, P. A., 1987, Hydraulic and mechanical properties of natural fractures in low permeability rock, Proc. 6th ISRM Congress, Montreal, Vol. 1, pp. 225- 231
  8. Rayan, T. M. and Farer, I. W., 1987, Laboratory determination of fracture permeability, Proc. of 28th U. S. Sympo. on Rock Mechanics, pp. 593-600
  9. Sundaram, P. N., Watkins, D. J., and Ralph, W. E., 1987, laboratory investigations of coupled stress-deformation- hydraulic flow in a natural rock fracture, Proc. 28th U. S. Sympo. on Rock Mechanics, pp. 585-592
  10. Suzuki Kenichiro, 1995, 불연속성암반의 수리역학특성의 평가와 암석풍화의 관계에 대한 기초적 연구, saitama university 박사학위논문, p. 61-62