소성∙가공 (Transactions of Materials Processing)

  • 제16권4호
  • /
  • Pages.323-328
  • /
  • 2007
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

집속 이온빔과 디지털 화상 관련법을 이용한 고 탄소 미세 강선의 잔류 응력 측정

Measurement of the Residual Stress in the Steel Wires by using Focused Ion Beam and Digital Image Correlation Method

  • 양요셉 (포항공과대학교 신소재공학과) ;
  • 배종구 (고려강선(주) 기술연구소) ;
  • 박찬경 (포항공과대학교 신소재공학과)
  • 발행 : 2007.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The residual stress in axial direction of the steel wires has been measured by using a method based on the combination of the focused ion beam(FIB) milling and digital image correlation(DIC) program. The residual stress is calculated from the measured displacement field before and after the introduction of a slot along the steel wires. The displacement is obtained by the digital correlation analysis of high-resolution scanning electron micrographs, while the slot is introduced by FIB milling with low energy beam. The experimental procedures are described and the feasibilities are demonstrated in steel wires fabricated with different conditions. It reveals that the tensile residual stress is formed in all steel wires and this is strongly influenced by the fabrication conditions.

키워드

참고문헌

  1. M. Dollar, I. M. Bernstein, A. W. Thompson, M. Shemenski, 1988, Influence of deformation substructure on flow and fracture of fully pearlitic steel, Acta Metall., Vol. 36, pp. 311-320 https://doi.org/10.1016/0001-6160(88)90008-9
  2. G. T. Gray, A. W. Tompson, 1998, Influence of deformation substructure on the flow and fracture of fully pearlite steel, Acta Metall., Vol. 36, pp. 311-320
  3. Y. S. Yang, H. J. Jun, S. Y. Park, C. G. Park, S. H. Lim, D. T. Ban, 2005, Effects of microstructure on the fatigue resistance of steel tire cords, Mater. Sci. Forum, Vol. 475-479, pp. 4125-4128
  4. J. LLorca, V. Sanchez-Galvez, 1989, Fatigue limit and fatigue life prediction in high strength cold drawn eutectoid steel wires, Fatigue Fract. Engng. Mater. Struct., Vol. 12, pp. 31-45 https://doi.org/10.1111/j.1460-2695.1989.tb00506.x
  5. K. Katagiri, T. Sato, H. S. Shin, L. Takahashi, H. Tashiro, S. Sasaki, 1997, Effects of drawing strain and bluing on the fatigue strength of eutectoid steel wires, Fatigue Fract. Engng. Mater. Struct., Vol. 20, pp. 1677-1686 https://doi.org/10.1111/j.1460-2695.1997.tb01520.x
  6. Michael B. Prime, 1999, Residual stress measurement bu successive extension of a slot, Applied Mechanics Reviews, Vol. 52, pp. 75-96 https://doi.org/10.1115/1.3098926
  7. J. W. Hutchinson, Z. Suo, 1992, Mixed mode cracking in layered materials, Adv. Appl. Mech., Vol. 29, pp. 63-91
  8. K. J. Kang, N. Yao, M. Y. He, A. G. Evans, 2003, A method for in situ measurement of the residual stress in thin films by using the focused ion beam, Thin Solid Films, Vol. 443, pp. 71-77 https://doi.org/10.1016/S0040-6090(03)00946-5

피인용 문헌

  1. Finite element analysis of the bending behavior of a workpiece in equal channel angular pressing vol.15, pp.2, 2009, https://doi.org/10.1007/s12540-009-0215-4