References
- H. Nathani, A. Dasari, and R. Misra, On the reduced susceptibility to stress whitening behavior of melt intercalated polybutene/clay nanocomposites during tensile straining, Acta Mat., 52, 3217 (2004) https://doi.org/10.1016/j.actamat.2004.03.021
- R. Hadal, Q. Yuan, J. Jog, and R Misra, On stress whitening during surface deformation in clay-containing polymer nanocornposites: A microstructural approach, Mat. Sci. Eng. A., 418, 268 (2006) https://doi.org/10.1016/j.msea.2005.11.032
- A. Blumstein, Polymerization of adsorbed rnonolayers: II. Thermal degradation of the inserted polymers, J. Polym Sci. A, 3, 2665 (1965)
- M. Alexandre and P. Dubois, Polymer layered silicate nanocomposites: Preparation, properties and uses of new class of materials, Mat. Sci. Eng., 28, 1 (2000) https://doi.org/10.1016/S0927-796X(00)00012-7
- D. Wang, D. Parlow, Q. Yao, and C. Wilkie, Melt blending preparation PVC sodium clay nanocomposites, J. Vinyl and Additive Technol., 8, 139 (2002) https://doi.org/10.1002/vnl.10354
- C. Wan, X. Qiao, Y. Zhang, and Y. Zhang, Effect of different clay treatment on morphology and mechanical properties of PVC/clay nanocomposies, Polym Test., 22, 453 (2003) https://doi.org/10.1016/S0142-9418(02)00126-5
- F. Coutinho and T. Costa, Performance of polypropylenewood fiber composites, Polym. Test., 18, 581 (1999) https://doi.org/10.1016/S0142-9418(98)00056-7
- J. Nam and J. Seferis, Generalized composite degradation kinetics of polymeric systems under isothermal and nonisothermal conditions, J. Polym. Phys., 30, 455 (1992) https://doi.org/10.1002/polb.1992.090300505
- Y. Ghim, Analysis of plastics pyrolysis in thermogravimetic analyzer by an Arrhenius-type rate equation including the effect of transfer lag, Hwahak Konghak, 29, 503 (1991)
- J. Du, D. Wang, C. Wilkie, and J. Wang, An XPS investigation of thermal degradation and charring on poly(vinyl chloride)clay nanocomposites, Polym. Degra. Stab., 79, 319 (2003) https://doi.org/10.1016/S0141-3910(02)00295-1
- P. Reichert, H. Nitz, S. Klinke, R. Brandsch, R. Thomann, and R. Mulhaupt, Poly(propylene)/organoclay nanocomposite formation: Influence of compatibilizer functionality and organoclay modification, Macromol. Mat. Eng., 275, 8 (2000) https://doi.org/10.1002/(SICI)1439-2054(20000201)275:1<8::AID-MAME8>3.0.CO;2-6
- E. Manias, A. Touny, L. Wu, K. Stawhecker, B. Lu, and T. Chung, Polypropylene/Montmorillonite Nano-composites: Review of the synthetic routes and materials, Chem of Mat., 13, 3516 (2001) https://doi.org/10.1021/cm0110627
- K. Yano, A. Usuki, A. Okada, T. Kurauchi, and O. Karnigaito, Synthesis and properties of polyimide-clay hybrid, J. Appl. Polym. Sci., Polym. Chem., 31, 2493 (1993) https://doi.org/10.1002/pola.1993.080311009
- X. Liu and Q. Wu, Polyamide 66/Clay Nanocomposites via Melt Intercalation, Macromol. Mat. Eng., 287, 180 (2002) https://doi.org/10.1002/1439-2054(20020301)287:3<180::AID-MAME180>3.0.CO;2-T
- N. Hasegawa, H. Okamoto, M. Kawasumi and A. Usuki, Preparation and mechanical properties of polystyrene-clay hybrids, J. Appl. Polymer, Sci., 74, 3359 (1999) https://doi.org/10.1002/(SICI)1097-4628(19991227)74:14<3359::AID-APP9>3.0.CO;2-2
- C. Park, O. Park, J. Lim, and H. Kim, The fabrication of syndiotactic polystyrene/organophilic clay nanocomposites and their properties, Polymer, 42, 7465 (2001) https://doi.org/10.1016/S0032-3861(01)00213-0
- P. Messersmith and E. Giannelis, Polymer-layered silicate nanocornposites: in situ intercalative polymerization of epsilon.-caprolactone in layered silicates, Chem Mat., 5, 1064 (1993) https://doi.org/10.1021/cm00032a005
- A. Coats and J. Redfern, Kinetics parameters from thermogravimetric data, Nature, 201, 68 (1964) https://doi.org/10.1038/201068a0
- T. Ozwa, A new method of analyzing thermogravimetic data, Bull. Chem. Soc. Japan, 38, 1881 (1965) https://doi.org/10.1246/bcsj.38.1881
- S. Oh, H. Lee, H. Kim, and K. Yoo, Kinetics of nonisothermal thermal degradation of styrene-butadiene rubber, J. Chem Eng., 16, 543 (1999)
- H. Kim, H. Yang, H. Kim, B. Lee and T. Hwang, Thermal properties of agro-flour-filled biodegradable polymer bio-cornposites, J. Therm Anal. Cal., 81, 299 (2005) https://doi.org/10.1007/s10973-005-0782-7
- A. Espert, W. Camacho, and S. Karlson, Thermal and thermomechanical properties of biocomposites made from modified recycled cellulose and recycled polypropylene, J. Appl. Polym. Sci., 89, 2353 (2003) https://doi.org/10.1002/app.12091
- H. Hatakeyema, N. Tanamachi, H. Matsumura, S. Hirose and T. Hatakeyama, Bio-based polyurethane composite foams with inorganic fillers studied by thermogravimetry, Thermochim Acta, 431, 155 (2005) https://doi.org/10.1016/j.tca.2005.01.065
- S. Mohanty, S. Verma, and S. Nayak, Dynamic mechanical and thermal properties of MAPE treated jute/HDPE composites, Comp. Sci. Tech., 66, 538 (2006) https://doi.org/10.1016/j.compscitech.2005.06.014
- S. Ray and M. Okamoto, Polymer/layered silicate nanocornposites: A review from preparation to processing, Prog. in Polym. Sci., 28, 1539 (2003) https://doi.org/10.1016/j.progpolymsci.2003.08.002
- M. Azizi-Samir, F. Alloin, and A. Dufresne, Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field, Biomolecules, 6, 612 (2005)