반사경 배치와 흡수기 형상에 따른 접시형 고온 태양열 시스템 성능비교

Performance Comparison of Dish Solar Collector With Mirror Arrays & Receiver Shapes

  • 마대성 (한국인하대학교 기계공학과 대학원) ;
  • 김용 (한국인하대학교 기계공학과 대학원) ;
  • 서태범 (인하대학교 기계공학부대학교 대학원)
  • Ma, Dae-Sung (Graduate School, Dept. of Mechanical Engineering, Inha University) ;
  • Kim, Yong (Graduate School, Dept. of Mechanical Engineering, Inha University) ;
  • Seo, Tae-Beom (Dept. of Mechanical Engineering, Inha University)
  • 발행 : 2007.03.30

초록

In order to analyze the performance comparison of dish solar collector with mirror arrays and receiver shapes, the radiative heat flux distribution inside the cavity receiver is numerically investigated. The solar irradiation reflected by dish solar collector is traced using the Monte-Carlo method. Five different dish solar collectors and three different cavity receivers are considered. A parabolic-shaped perfect mirror of which diameter is 1.5 m is considered as a reference dish solar collector and four different arrays of twelve identical parabolic-shaped mirror facets of which diameter are 0.4 m are used. Their reflecting areas, which are $1.5\;m^2$, are the same. Three different cavity receiver shapes are dome, conical, and cylindrical. In addition, the radiative properties of the concentrating surfaces can vary the thermal performance of the cavity receiver so that variation of the surface reflectivity of each mirror is considered. Based on the calculation, the design information of dish solar collector for producing the electric power can be obtained. The results show that the dome type has the best performance in receiver shapes and the 2AND4 INLINE has the best performance in mirror arrays except perfect mirror.

키워드

참고문헌

  1. Shin, U. C., An Experimental Study on the Solar Hot Water Heating System for the Dormitory of University, Journal of the Korean Solar Energy Society, Vol. 26, No.2, pp.103-109, 2006
  2. Ryu, S. Y., An Analysis of Heat Losses from a Receiver for a Dish-Type Solar Energy Collecting System, Inha University, Incheon, Korea, 1999
  3. Kang, M. C., Flux Density Distribution of the Dish Solar Concentrator (KIERDISH), Journal of the Korean Solar Energy Society, Vol. 24, No.4, pp.11-18 2004
  4. Ryu, S. Y., An Analysis of Heat Losses from Receivers for a Multifaceted Parabolic Solar Collector, Journal of the Korean Solar Energy Society, Vol. 20, No.3, pp. 61-73, 2000
  5. Thomas, R. M., Analysis and Design of Two Stretched Membrane Parabolic Dish Concentrators, Journal of Solar Energy Engineering, Vol. 113, pp. 180-187 ,1991 https://doi.org/10.1115/1.2930490
  6. Jo, D. K, A Survey of Direct Normal Insolation Resources for the Construction of Solar Thermal Power Generation Sites in Korea, Journal of the Korean Solar Energy Society, Vol. 25 No.1, pp. 11-18, 2005
  7. Johnston, G., Focal Region Measurements of the 20 $m^2$ Tiled Dish at the Australian National University, Solar Energy, Vol. 63, No.2, pp. 117-124, 1998 https://doi.org/10.1016/S0038-092X(98)00041-3