DOI QR코드

DOI QR Code

Full-scale tests and finite element analysis of arched corrugated steel roof under static loads

  • Wang, X.P. (School of Civil Engineering and Architecture, Wuhan University of Technology) ;
  • Jiang, C.R. (School of Civil Engineering and Architecture, Wuhan University of Technology) ;
  • Li, G.Q. (School of Civil Engineering and Architecture, Wuhan University of Technology) ;
  • Wang, S.Y. (School of Civil Engineering and Architecture, Wuhan University of Technology)
  • 투고 : 2005.11.19
  • 심사 : 2007.06.22
  • 발행 : 2007.08.25

초록

Arched Corrugated Steel Roof (ACSR) is a kind of thin-walled steel shell, composing of arched panels with transverse small corrugations. Four full-scale W666 ACSR samples with 18m and 30m span were tested under full and half span static vertical uniform loads. Displacement, bearing capacities and failure modes of the four samples were measured. The web and bottom flange in ACSR with transverse small corrugations are simplified to anisotropic curved plates, and the equivalent tensile modulus, shear modulus and Poisson's ratio of 18m span ACSR were measured. Two 18 m-span W666 ACSR samples were analyzed with the Finite Element Analysis program ABAQUS. Base on the tests, the limit bearing capacity of ACSR is low, and for half span loading, it is 74-75% compared with the full span loading. When the testing load approached to the limit value, the bottom flange at the sample's bulge place locally buckled first, and then the whole arched roof collapsed suddenly. If the vertical loads apply along the full span, the deformation shape is symmetric, but the overall failure mode is asymmetric. For half span vertical loading, the deformation shape and the overall failure mode of the structure are asymmetric. The ACSR displacement under the vertical loads is large and the structural stiffness is low. There is a little difference between the FEM analysis results and testing data, showing the simplify method of small corrugations in ACSR and the building techniques of FEM models are rational and useful.

키워드

참고문헌

  1. Abdel-Sayed, G. (1970),"Critical shear loading of curved panels of corrugated sheets", J. Eng. Mech. Div., 96(6), 895-912.
  2. Airumyan, E. L. and Boyko, O. I. (1997),"Full-scale testing and design of frameless arch steel roof", Struct. Assessment, BookWeb Pro, London, 211-218.
  3. Benussi, F. and Mauro, A. (1986),"Half-Barrel shells composed of cold-formed profiles", Proceedings of IABSE Colloquium, Stockholm, June.
  4. CECS167 (2004),"Technical specification for arched corrugated steel roof", China Association for Engineering Construction Standardization (In Chinese), China Planning Press, Beijing.
  5. Featherston, C. A. and Ruiz, C. (1998),"Buckling of curved panels under combined shear and bending", J. Mech. Eng. Sci. Proceedings Part C, 212, 183-196. https://doi.org/10.1243/0954406981521141
  6. Friedman, R. and Kennedy, J. (1994),"Analysis and compression testing of 2024 and 8009 aluminum alloy zeestiffened panels", J. Eng. Mater. Technol., Trans AMSE, 116(2), 238-23. https://doi.org/10.1115/1.2904279
  7. Hahn, E. K., Carlsson, L. A. and Westerlind, B. S. (1992),"Edge-compression fixture for buckling studies of corrugated board panels", Exp. Mech., 252-258.
  8. Herbert, A. M. and Smith, J. H. (1976),"Finite element analysis of doubly corrugated shells", J. Struct. Div., 102(10), 2033-2051.
  9. Jorgenson, J. L. and Chowdhury, A. H. (1982)."Buckling strength of cold-formed steel curved panels", Proceedings of Sixth International Speciality Conference in Cold-formed Steel Structures, ST. Louis, Missouri, Nov.
  10. Liu, Xiliang, Zhang, Yong and Zhang, Fuhai (1999),"Experimental study on full-sized models of arched corrugated metal roof", Proceedings of ICASS'99, Hong Kong, December.
  11. Marzouk, O. A. and Abdel-Sayed, G. (1975),"Stability of half-barrel orthotropic shells", J. Struct. Div., 101(7), 1517-1530.
  12. Wang, Xiaoping (1999),"Experimental study and FEM analysis of large-span metal corrugated arch roof", PHD thesis (In Chinese), Wuhan University of Technology.
  13. Xu, Lei, Gong, Yanglin, Guo Ping (2001),"Compressive tests of cold-formed steel curve panels", J. Construct. Steel Res., 57, 1249-1265. https://doi.org/10.1016/S0143-974X(01)00048-7
  14. Zhang, Yong (2000),"Study on analysis theory, design method and experiments of arched corrugated metal roof", PHD thesis (In Chinese), Tianjin University.

피인용 문헌

  1. Numerical Prediction of Local Instability in Double Corrugated Profiles vol.14, pp.20, 2007, https://doi.org/10.3390/ma14206002