DOI QR코드

DOI QR Code

An evaluation equation of load capacities for CFT square column-to-beam connections with combined diaphragm

  • Choi, Sung-Mo (Department of Architectural Engineering, University of Seoul) ;
  • Jung, Do-Sub (Department of Architectural Engineering, University of Seoul) ;
  • Kim, Dae-Joong (Engineering & Construction Department of Samsung Corporation) ;
  • Kim, Jin-Ho (Research Institute of Indurstrial Science & Technology Steel Structure Research Laboratory)
  • 투고 : 2006.02.14
  • 심사 : 2007.05.14
  • 발행 : 2007.08.25

초록

The objective of this study is to clarify the structural features of members consisting of connection, as a series of the previous study on the CFT column-to-beam tensile connection with combined cross diaphragm. This connection has the merits that the stress is distributed evenly on the beam flange and the diaphragm and the stress concentration is reduced, by improving the stress transfer route and restraining abrupt deformation of diaphragm. The finite element analysis was performed to find out the stress transfer through sleeve which is an important member of the connection with combined cross diaphragm. The length and thickness of sleeve were used as variables for the analysis. As the analysis results, the length and thickness of sleeve didn't influence on the capacity of the connection and played a role of a medium to transfer the stress from the diaphragm to the filled concrete. It is proposed that the appropriate length of sleeve be the same value as the diameter of sleeve and the appropriate ratio of sleeve diameter to sleeve thickness be 20. Two equations for evaluation of the load-carrying capacity of the connection were also proposed through the modification of the evaluation equation suggested in the previous study.

키워드

참고문헌

  1. ANSYS Inc. (2004), ANSYS Release 8.0-user's manual.
  2. Architectural Institute of Japan (1997), Recommendations for Design and Construction of Concrete Filled Steel Tubular Structures.
  3. Architectural Institute of Korea (1998), Design code and Explanation of Steel Tubular Structure.
  4. Architectural Institute of Korea (2004), Design and Construction Guide on Concrete Filled Tubular Structure.
  5. Azizinamini, Atorod and Schneider, Stephen P. (2004),"Moment connections to circular concrete- filled steel tube columns", J. Struct. Eng., ASCE, 130(2).
  6. Cha, E. J., Choi, S. M. and Kim, Y. S. (2003),"A moment-rotation curve for CFT square columns and steel beams according to reliability analysis", ASSCCA, 943-950.
  7. Cha, E. J., Kim, Y. S., Kim, J. H. and Choi, S. M. (2002),"Reliability analysis for CFT column-to-beam connections with new diaphragm", Proceedings of International Symposium on Steel Structures: The Second, 103-114.
  8. Choi, S. M., Hong, S. D., Kim, D. G., Kim, Y. S. and Kim, J. H. (2004),"Structural capacities of tension side for CFT square column-to-beam connections with combined cross diaphragm", Pacific Structural Steel Conference, 24-27, Mar., 2004.
  9. Choi, S. M., Kim, D. J., Kim, J. H. and Lee, S. H. (2005),"Experimental study on seismic performance improvement of concrete-filled tubular square column-to-beam connections with combined cross-diaphragm", Int. J. Steel Struct., 5(4), 367-375.
  10. Choi, S. M., Yoon, Y. S., Kim, D. K., Kim, Y. S. and Kim, J. H. (2004),"An experimental study on seismic performance of concrete filled tubular square column-to-beam connections with combined cross diaphragm", Pacific Structural Steel Conference.
  11. Davies, G. and Packer, J. A. (1982),"Predicting the strength of branch plate-RHS connections for punching shear", Canadian J. Civ. Eng., 9(3), 458-467. https://doi.org/10.1139/l82-055
  12. Fung, T. C., Sho, C. K., Chan, T. K. and Erni (2002),"Stress concentration factors of doubler plate reinforced tubular T joints", J. Struct. Eng., ASCE, 128(11), 1399-1412. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:11(1399)
  13. Hong, S. D., Choi, S. M. and Kim, Y. S. (2003),"A moment-rotation curve for CFT square columns and steel beams", ASSCCA, 951-960.
  14. Hong, S. D., Kim, Y. S., Kim, J. H. and Choi, S. M. (2002),"Simple tension testing for CFT column-to-beam connections at tension side with new diaphragms", Proceedings of International Symposium on Steel Structures: The Second, 405-416.
  15. Japanese Society of Steel Construction (1996), Design and Construction of Steel Beam-to-Column Connection - from the Earthquake Damage in the Southern Part of Hyogo-Ken.
  16. Jung, D. S., Choi, S. M., Kim, D. J. and Kim, J. H. (2005),"An experimental study on seismic performance improvement of concrete filled tubular square column-to-beam connections with combined cross diaphragm", Proceedings of International Symposium on Steel Structures: The Third, 524-535.
  17. Parra-Montesinos, G. and Wight, J. K. (2001),"Modeling shear behavior of hybrid RCS beam-column connections", J. Struct. Eng., ASCE, 127(3).
  18. Yoon, Y. S., Kim, Y. S., Kim, J. H. and Choi, S. M. (2002),"Cyclic testing for CFT column-to-beam connections with new diaphragm", Proceedings of International Symposium on Steel Structures: The Second, 440-451.

피인용 문헌

  1. Hysteresis behavior of concrete filled square steel tube column-to-beam partially restrained composite connections vol.66, pp.7, 2010, https://doi.org/10.1016/j.jcsr.2010.01.006
  2. Improving fire performance with steel fibers for internally anchored square composite columns vol.103, 2014, https://doi.org/10.1016/j.jcsr.2014.09.003
  3. Structural Capacities of Tension Side for CFT Square Column-To-Beam Connections with Combined-Cross Diaphragm vol.11, pp.2, 2008, https://doi.org/10.1260/136943308784466251
  4. Test of extended thick-walled through-diaphragm connection to thick-walled CFT column vol.20, pp.1, 2016, https://doi.org/10.12989/scs.2016.20.1.001
  5. Nonlinear finite element analysis of CFT-to-bracing connections subjected to axial compressive forces vol.33, pp.5, 2011, https://doi.org/10.1016/j.engstruct.2011.01.018
  6. Tensile strength and concrete cone failure in CFT connection with internal diaphragms vol.17, pp.2, 2017, https://doi.org/10.1007/s13296-017-6021-9
  7. Uni-axial behaviour of normal-strength CFDST columns with external steel rings vol.13, pp.6, 2007, https://doi.org/10.12989/scs.2012.13.6.587
  8. Uni-axial behaviour of normal-strength concrete-filled-steel-tube columns with external confinement vol.3, pp.6, 2012, https://doi.org/10.12989/eas.2012.3.6.889