DOI QR코드

DOI QR Code

Corrosion effects on tension stiffening behavior of reinforced concrete

  • Shayanfar, M.A. (Civil Engineering Department, Iran University of Science and Technology) ;
  • Ghalehnovi, M. (Civil Engineering Department, Iran University of Science and Technology) ;
  • Safiey, A. (Civil Department, Moshanir Power Engineering Consultants)
  • Received : 2007.01.10
  • Accepted : 2007.08.26
  • Published : 2007.10.25

Abstract

The investigation of corrosion effects on the tensile behavior of reinforced concrete (RC) members is very important in region prone to high corrosion conditions. In this article, an experimental study concerning corrosion effects on tensile behavior of RC members is presented. For this purpose, a comprehensive experimental program including 58 cylindrical reinforced concrete specimens under various levels of corrosion is conducted. Some of the specimens (44) are located in large tub containing water and salt (5% salt solution); an electrical supplier has been utilized for the accelerated corrosion program. Afterwards, the tensile behavior of the specimens was studied by means of the direct tension tests. For each specimen, the tension stiffening curve is plotted, and their behavior at various load levels is investigated. Average crack spacing, loss of cross-section area due to corrosion, the concrete contribution to the tensile response for different strain levels, and maximum bond stress developed at each corrosion level are studied, and their appropriate relationships are proposed. The main parameters considered in this investigation are: degree of corrosion ($C_w$), reinforcement diameter (d), reinforcement ratio (${\rho}$), clear concrete cover (c), ratio of clear concrete cover to rebar diameter (c/d), and ratio of rebar diameter to reinforcement percentage ($d/{\rho}$).

Keywords

References

  1. ACI Committee 318 (1999), "Building code requirement for structural concrete and commentary", ACI 318-99, American Concrete Institute, Chicago.
  2. Amleh, L. and Mirza, M. S. (1999), "Corrosion influence on bond between steel and concrete", ACI Struct. J., 96(3), 415-423.
  3. Auyeung, Y. B., Balaguru, P. and Chung L. (2000), "Bond behavior of corroded reinforcement bars", ACI Mater. J., 97(2), 214-220.
  4. Behzadi Nejad Ahwazi, B., Amleh, L. and Mirza, M. S. (2001), "Effect of corrosion on bond strength of reinforcing bar in concrete", Proceedings of First International Conference on Concrete & Development, Tehran, Iran, 309-330.
  5. CEB-FIB (1990), "Model code for concrete structures", Comite Euro International du Beton, Paris, 437.
  6. Chan, H. C., Cheung, Y. K. and Huang, Y. P. (1992), "Crack analysis of reinforced tension member", ASCE J. Str. Eng., 118(8), 2118-2132. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:8(2118)
  7. Cho, J. Y., Kim, N. S., Cho, N. S. and Choi, I. K. (2004a), "Cracking behavior of reinforced concrete panel subjected to biaxial tension", ACI Struct. J., 101(1), 76-84.
  8. Cho, J. Y., Kim, N. S., Cho, N. S. and Choun, Y. S. (2004b), "Stress-strain relationship of reinforced concrete subjected to biaxial tension", ACI Struct. J., 101(2), 202-208.
  9. Choi, C. K. and Cheung, S. H. (1996), "Tension stiffening model for planar reinforced concrete members", Comput. Struct., 59, 179-190 https://doi.org/10.1016/0045-7949(95)00146-8
  10. Fang, C., Lundgren, K., Chen, L. and Zhu, C. (2004), "Corrosion influences on bond in reinforced concrete", Cement Concrete Res., 34, 2159-2167. https://doi.org/10.1016/j.cemconres.2004.04.006
  11. Ghalehnovi, M. (2004), "Characteristic relations in nonlinear finite element analysis with considering corrosion and bond-slip", PhD thesis, Iran University of Science and Technology, Tehran (In Persian).
  12. Goto, Y. (1971), "Cracks formed in concrete around deformed tension bars", Proceedings ACI J., 68(4), 244-281.
  13. Management and Programming Institute (1999), "Iranian concrete code (ABA)", Publication No. 120, Tehran, Iran (In Persian).
  14. Mirza, M. S. and Houde, J. (1979), "Study of bond stress slip relationships in reinforced concrete", Proceedings ACI J., 76(1), 19-45.
  15. Palsson, R. and Mirza, M. S. (2002), "Mechanical response of corroded steel reinforcement of abandoned concrete bridge", ACI Struct. J., 99(2), 157-162.
  16. Rizkalla, S. H. and Hwang, L. S. (1984), "Crack prediction for members in uniaxial tension", Proceedings ACI J., 81, 1984, 572-579.
  17. Safiey, A. (2004), "Nonlinear finite element analysis of RC beams and columns taking into account corrosion and bond-slip", MS thesis, Iran University of Science and Technology, Tehran (In Persian).
  18. Somoyaji, S., and Shah, S. P. (1981), "Bond stress versus slip relationships and cracking response of tension members", ACI J., 78, 217-225.
  19. Stanish, K., Hooton, R. D. and Pantazopoulo, S. J. (1996), "Corrosion effects on bond strength in reinforced concrete", ACI Struct. J., 96(6), 915-921.
  20. Wollrab, E., Kulkarni, S. M., Ouyang, C. and Shah, S. P. (1996)," Response of reinforced concrete panels under uniaxial tension", ACI Struct. J., 93(6), 648-657.

Cited by

  1. Carbonation-Induced and Chloride-Induced Corrosion in Reinforced Concrete Structures vol.27, pp.9, 2015, https://doi.org/10.1061/(ASCE)MT.1943-5533.0001209
  2. Effect of longitudinal rebar corrosion on the compressive strength reduction of concrete in reinforced concrete structure vol.19, pp.6, 2016, https://doi.org/10.1177/1369433216630367
  3. Structural performance assessment of deteriorated reinforced concrete bridge piers vol.14, pp.4, 2014, https://doi.org/10.12989/cac.2014.14.4.387
  4. Hypoelastic modeling of reinforced concrete walls vol.5, pp.3, 2008, https://doi.org/10.12989/cac.2008.5.3.195
  5. Post-cracking behavior of UHPC on the concrete members reinforced by steel rebar vol.18, pp.1, 2016, https://doi.org/10.12989/cac.2016.18.1.139
  6. A State-of-the-Art Review of Bending and Shear Behaviors of Corrosion-Damaged Reinforced Concrete Beams pp.0889-3241, 2019, https://doi.org/10.14359/51706919
  7. Beams affected by corrosion influence of reinforcement placement in the cracking vol.37, pp.2, 2007, https://doi.org/10.12989/sem.2011.37.2.163
  8. Statistical Approach to Modeling Reduced Shear Capacity of Corrosion-Damaged Reinforced Concrete Beams vol.26, pp.2, 2007, https://doi.org/10.1061/(asce)sc.1943-5576.0000564
  9. Influence of chloride corrosion on tension capacity of rebars vol.28, pp.10, 2021, https://doi.org/10.1007/s11771-021-4834-3