DOI QR코드

DOI QR Code

Limit state assessment of nodal zone capacity in strut-and-tie models

  • Tjhin, Tjen N. (Buckland & Taylor Ltd.) ;
  • Kuchma, Daniel A. (Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign)
  • 투고 : 2006.07.26
  • 심사 : 2007.07.05
  • 발행 : 2007.08.25

초록

A method based on the lower-bound theorem of limit analysis is presented for the capacity assessment of nodal zones in strut-and-tie models. The idealized geometry of the nodal zones is formed by the intersection of effective widths of the framing struts and ties. The stress distribution is estimated by dividing the nodal zones into constant stress triangles separated by lines of stress discontinuity. The strength adequacy is verified by comparing the biaxial stress field in each triangle with the corresponding failure criteria. The approach has been implemented in a computer-based strut-and-tie tool called CAST (Computer-Aided Strut-and-Tie). An application example is also presented to illustrate the approach.

키워드

참고문헌

  1. ACI Committee 318 (2005), Building code requirements for structural concrete (ACI 318-05) and commentary (ACI 318R-05), American Concrete Institute, Farmington Hills, MI.
  2. Alshegeir, A. and Ramirez, J. A. (1992), "Computer graphics in detailing strut-tie models", J. Comp. in Civ. Eng., 6(2), 220-232. https://doi.org/10.1061/(ASCE)0887-3801(1992)6:2(220)
  3. Bergmeister, K., Breen, J. E. and Jirsa, J. O. (1991), "Dimensioning of nodal zones and anchorage of reinforcement", IABSE Colloquium Stuttgart 1991: Structural Concrete, International Association for Bridge and Structural Engineering, Zurich, Switzerland, 551-564.
  4. Chen, W. F. and Drucker, D. C. (1969), "Bearing capacity of concrete blocks or rock", J. Eng. Mech. Div., ASCE, 95(4), 955-978.
  5. Chen, W. F. and Han, D. J. (1988), Plasticity for Structural Engineers, Springer-Verlag, Inc., New York, NY.
  6. Hadley, G. (1962), Linear Programming, Addison-Wesley Publishing Company, Inc., Reading, MA.
  7. Hajdin, R. (1990), "Computerunterstutzte berechnung von stahlbetonscheiben mit spannungsfeldern", Report No. 175, Institut fur Baustatik und Konstruktion, Eidgenössische Technische Hochschule, Zurich, Switzerland.
  8. Marti, P. (1985), "Basic tools of reinforced concrete beam design", ACI J., Proceedings, 82(1), 45-56.
  9. Muller, P. (1978), "Plastische berechnung von stahlbetonscheiben und-balken", Report No. 83, Institut fur Baustatik und Konstruktion, Eidgenössische Technische Hochschule, Zurich, Switzerland.
  10. Nielsen, M. P. (1999), Limit Analysis and Concrete Plasticity, 2nd Ed., CRC Press LLC, Boca Raton, FL.
  11. Schlaich, J., Schafer, K. and Jennewein, M. (1987), "Toward a consistent design of structural concrete", PCI J., 32(3), 74-150. https://doi.org/10.15554/pcij.05011987.74.150
  12. Schlaich, M. and Anagnostou, G. (1990), "Stress fields for nodes of strut-and-tie model", J. Struct. Eng., ASCE, 116(1), 13-23. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:1(13)
  13. Thompson, M. K., Ziehl, M. J., Jirsa, J. O. and Breen, J. E. (2005), "CCT nodes anchored by headed bars - part 1: behavior of nodes", ACI Struct. J., 102(6), 808-815.
  14. Thompson, M. K., Jirsa, J. O. and Breen, J. E. (2006), "CCT nodes anchored by headed bars - part 2: capacity of nodes", ACI Struct. J., 103(1), 65-73.
  15. Tjhin, T. N. (2004), "Analysis and design tools for structural concrete using strut-and-tie models", Ph.D. Thesis, University of Illinois at Urbana-Champaign, Urbana, IL.
  16. Tjhin, T. N. and Kuchma, D. A. (2002), "Computer-based tools for design by the strut-and-tie method: advances and challenges", ACI Struct. J., 99(5), 586-594.
  17. Tjhin, T. N. and Kuchma, D. A. (2004), CAST - Computer-Aided Strut-and-Tie - Program, Report, and User's Manual (Version 0.9.11), University of Illinois at Urbana-Champaign, Urbana, IL. Available: www.cee.uiuc.edu/kuchma/strut_and_tie.
  18. Tjhin, T. N. and Kuchma, D. A. (2007), "Integrated analysis and design tool for the strut-and-tie method", Eng. Struct. (in press, available online 30 March 2007).
  19. Yun, Y. M. and Ramirez, J. A. (1996), "Strength of struts and nodes in strut-tie model", J. Struct. Eng., ASCE, 122(1), 20-29. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:1(20)

피인용 문헌

  1. Analysis and Design of Prestressed Precast Hollow Core Slabs Using Strut and Tie Method vol.37, pp.2, 2012, https://doi.org/10.1007/s13369-012-0179-4