DOI QR코드

DOI QR Code

Nonlinear analysis of RC beams strengthened by externally bonded plates

  • Park, Jae-Guen (Department of Civil and Environmental Engineering, Sungkyunkwan University) ;
  • Lee, Kwang-Myong (Department of Civil and Environmental Engineering, Sungkyunkwan University) ;
  • Shin, Hyun-Mock (Department of Civil and Environmental Engineering, Sungkyunkwan University) ;
  • Park, Yoon-Je (Structural Division, S & Q Engineering Co, Ltd.)
  • 투고 : 2006.09.21
  • 심사 : 2007.03.23
  • 발행 : 2007.04.25

초록

External bonding of steel or FRP plates to reinforced concrete (RC) structures has been a popular method for strengthening RC structures; however, unexpected premature failure often occurs due to debonding between the concrete and the epoxy. We proposed a Coulomb criterion with a constant failure surface as the debonding failure criterion for the concrete-epoxy interface. Diagonal shear bonding tests were conducted to determine the debonding properties that were related to the failure criterion, such as the angle of internal friction and the coefficient of cohesion. In addition, an interface element that utilized the Coulomb criterion was implemented in a nonlinear finite element analysis program to simulate debonding failure behavior. Experimental studies and numerical analysies on RC beams strengthened by an externally bonded steel or FRP plate were used to determine the range of the coefficient of cohesion. The results that were presented prove that premature failure loads of strengthened RC beams can be predicted with using the bonding properties and the finite element program with including the proposed Coulomb criterion.

키워드

참고문헌

  1. Aprile, A., Spancone , E. and Limkatanyu, S. (2001), "Role of bond in RC beams strengthened with steel and FRP plates", J. Struct. Eng., ASCE, 127(12), 1445-1452. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:12(1445)
  2. Arduini, M., Tommaso, A. D. and Nanni, A. (1997), "Brittle failure in FRP plate and sheet bonded beams", ACI Struct. J., 94(4), 363-370.
  3. Garden, H. N., Quantrill, R. J., Hollaway, L. C., Thorne, A. M. and Parke, G. A. R. (1998), "An experimental study of the anchorage length of carbon fibre composite plates used to strengthen reinforced concrete beams", Const. Build. Mater., 12, 203-219. https://doi.org/10.1016/S0950-0618(98)00002-6
  4. Kim, T. H., Lee, K. M., Yoon, C. Y. and Shin, H. M. (2002a), "Inelastic behavior and ductility capacity of reinforced concrete bridge piers under earthquake. I: Theory and Formulation", J. Struct. Eng., ASCE, 129(9), 1199-1207.
  5. Kim, T. H., Lee, K. M. and Shin, H. M. (2002b), "Nonlinear analysis of reinforced concrete shells using layered elements with drilling degree of freedom", ACI Struct. J., 99(4), 418-426.
  6. Nguyen, D. M., Chan, T. K. and Cheong, H. K. (2001), "Brittle failure and bond development length of CFRPconcrete beams", J. Compos. Constr., ASCE, 5(1), 12-17. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(12)
  7. Malek, A. M., Saadatmanesh, H., and Ehsani, M. R. (1998), "Prediction of failure load of R/C beams strengthened with FRP plate due to stress concentration at the plate end", ACI Struct. J., 95(1), 142-152.
  8. Park, Y. H., Kim, K. H., Yoo, Y. C., Park, J. S., Cho, C. J. and Chung, W. T. (2002), Development of Strengthening Methods for Deteriorated Concrete Bridges, Korea Institute of Construction Technology 2002-051, Internal Research Project Report.
  9. Roberts, T. M. (1989), "Approximate analysis of shear and normal stress concentrations in the adhesive layer of plated RC beams", The Struct. Eng., 67(12), 229-233.
  10. Saadatmanesh, H. and Malek, A. M. (1998), "Design guidelines for flexural strengthening of RC beams with FRP plates", J. Compos. Constr., ASCE, 2(4), 158-164. https://doi.org/10.1061/(ASCE)1090-0268(1998)2:4(158)
  11. Smith, S. T. and Teng, J. G. (2002), "FRP strengthedned RC beams-I: review of debonding strength models", Eng. Struct., 24(4), 385-395. https://doi.org/10.1016/S0141-0296(01)00105-5
  12. Smith, S. T. and Teng, J. G. (2002), "FRP strengthened RC beams-II: assessment of debonding strength models", Eng. Struct., 24(4), 397-417. https://doi.org/10.1016/S0141-0296(01)00106-7
  13. Swamy, R. N., Jones, R. and Bloxham, J. W. (1987), "Structural behaviour of reinforced concrete beams strengthened by epoxy-bonded steel plates", The Struct. Eng., 65A(2), 59-68.
  14. Taylor, R. L. (2000), FEAP - A Finite Element Analysis Program, Version 7.2, Users Manual, Volume 1 and Volume 2.
  15. Täljsten, B. (1997), "Strengthening of beams by plate bonding", J. Mater. Civ. Eng., ASCE, 9(4), 206-212. https://doi.org/10.1061/(ASCE)0899-1561(1997)9:4(206)
  16. Tumialan, G., Belarbi, A. and Nanni, A. (1999), Reinforced Concrete Beams Strengthened with CFRP Composites: Failure Due to Concrete Cover Delamination, Department of Civil Engineering, Center for Infrastructure Engineering Studies, Report No. CIES99/01, University of Missouri-Rolla, USA.
  17. Varastehpour, H. and Hamelin, P. (1997), "Strengthening of concrete beams using fiber-reinforced plastics", Mater. Struct., 30, 160-166. https://doi.org/10.1007/BF02486388
  18. Ziraba, Y. N., Baluch, M. H., Basunbul, I. A., Sharif, A. M., Azad, A. K. and Alsulaimani, G. J. (1994), "Guidelines towards the design of reinforced concrete beams with external plates", ACI Struct. J., 91(6), 639-646.
  19. Ziraba, Y. N., Baluch, M. H., Basunbul, I. A., Azad, A. K., Al-Sulaimani, G. J. and Sharif, A. M. (1995), "Combined experimental-numerical approach to characterization of steel-concrete interface", Mater. Struct., 28, 518-525. https://doi.org/10.1007/BF02473156

피인용 문헌

  1. Side-NSM composite technique for flexural strengthening of RC beams vol.20, pp.4, 2007, https://doi.org/10.12989/cac.2017.20.4.439
  2. Investigating loading rate and fibre densities influence on SRG - concrete bond behaviour vol.34, pp.6, 2020, https://doi.org/10.12989/scs.2020.34.6.877
  3. Static load test of RC T-beam bridge flexural strengthening with externally bonded steel plates vol.791, pp.1, 2007, https://doi.org/10.1088/1755-1315/791/1/012018