DOI QR코드

DOI QR Code

Autofrettage effects on strength and deformation of fiber reinforced pressure vessel

  • Wang, X. (Department of Engineering Mechanics, School of Naval Architecture and Civil Engineering, Shanghai Jiaotong University) ;
  • Chen, X. (Department of Engineering Mechanics, School of Naval Architecture and Civil Engineering, Shanghai Jiaotong University)
  • Received : 2006.07.03
  • Accepted : 2007.04.25
  • Published : 2007.10.20

Abstract

Based on the composite finite element simulation and a series of hydrostatic pressure and burst tests, autofrettage effects on strength and deformation of fiber reinforced pressure vessel with metallic liners have been studied in the paper (autofrettage: during the course of one pressure taking effect, the increasing internal stress in metallic liner can surpass the yielding point and the plastic deformation will happen, which result in that when there is no internal pressure, there are press stress in liner while tensile stress in fiber lamination). By making use of a composite finite element Ansys code and a series of experiments, the autofrettage pressure is determined in order to make the aluminium liner be totally in elastic state, under given hydrostatic test pressure. The stress intensity factors of the longitudinal crack in aluminum liner end under internal pressure and thermal loads have been computed and analyzed before and after the autofrettage processing. Through numerical calculation and experiment investigations, it is found that a correct choice for autofrettage pressure can improve the gas-tightness and fatigue strength of FRP vessel.

Keywords

References

  1. Antonelli, V. and Van, T.M. (2001), 'Design of composite pressure hull end-closures', SAMPE J., 37, 15-22
  2. Ansys, Inc. ANSYS Analysis Guides Third Edition. SAS, IP Inc., 1997
  3. Ben, G, Sakata, K. and Ohta, H. (2006), 'Increase of burst pressure and optimum design for CFRP pressure vessels reinforced with SMA wire', A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 72, 459-464 https://doi.org/10.1299/kikaia.72.459
  4. Iding, R.H. (1973), 'Identification of non-line material by finite element method', Report UCSEM 73-4, Dept. Of Civil Engineering, University of California, Berkeley
  5. John, W, Tom, Z., Gary, S., Greg, C. and Norman, F. (2004), 'Design and testing of large diameter composite reinforced pressure vessels for offshore gas applications', Proc. of the 23rd Int. Conf on Offshore Mechanics and Arctic Engineering - Part A: Offshore Technology, 1, 235-244
  6. Jhung, M.J. and Park, Y.W. (1999), 'Deterministic structural and fracture mechanics analyses of reactor pressure vessel for pressurized thermal shock', Struct. Eng. Mech., 8(1), 103-118 https://doi.org/10.12989/sem.1999.8.1.103
  7. Levend, P. and Nuran, K. (2002), 'Design of fiber-reinforced composite pressure vessels under various loading conditions', Compos. Struct., 58, 83-95 https://doi.org/10.1016/S0263-8223(02)00037-5
  8. Liu, J. (1997), 'Structural design and analysis of fiber reinforced plastic vessels with load-carring metallic liner', Transaction of the Japan Society of Mechanical Engineering, Part A, 63, 1758-1765 https://doi.org/10.1299/kikaia.63.1758
  9. Mirza, S., Bryan, A. and Noori, M. (2001) 'Fiber-reinforced composite cylindrical vessel with lugs', Compos. Struct., 53, 143-151 https://doi.org/10.1016/S0263-8223(00)00185-9
  10. Meng, L.B., Jin, G.C., Yao, X.F. and Yeh, H.Y. (2006), 3D Full-Field Deformation Monitoring of Fiber Composite Pressure Vessel Using 3D Digital Speckle Correlation Method, Polymer Testing, 25(1), 42-48 https://doi.org/10.1016/j.polymertesting.2005.09.011
  11. Okamoto, S. and Omura, Y. (2005), 'Triaxial stress analysis of cylindrical pressure vessels composed of two layers of orthotropic elasto-plastic materials', Pressure Vessels Piping Division PVP, 3, 41-48
  12. Tsai, S.W. and Hahn, H.T. (1980), 'Introduction to composite materials', Westport, 1980. CT: Technomic publishing CO
  13. Tsai, S.W. (1985), 'Composites design', USA, Technomic publishing Think Composites
  14. Vasiliev, V.V., Krikanov, A.A. and Razin, A.F. (2003), 'New generation of filament-wound composite pressure vessels for commercial applications', Compos. Struct., 62, 449-459 https://doi.org/10.1016/j.compstruct.2003.09.019
  15. Wild, P.M. and Vichers, G,W, (1997), 'Analysis of filament-wound cylindrical shell under combined centrifugal, prssure and axial loading', Compos. Part A, 28, 47-55 https://doi.org/10.1016/S1359-835X(96)00093-0
  16. Xia, M., Kemmochi, K. and Takayanagi, H. (2001), 'Analysis of filament wound fiber-reinforced standwich pipe under combined internal pressure and thermomechanical loading', Compos. Struct., 51, 273-283 https://doi.org/10.1016/S0263-8223(00)00137-9
  17. Yao, X.F., Xu, W., Xu, M.Q., Jin, G.C. and Yeh, H.Y. (2004a), 'Caustic study on stress singularities in laminated composites under concentrated loads', Int. J. Solid Struct., 41(13), 3383-3393 https://doi.org/10.1016/j.ijsolstr.2004.02.007
  18. Yao, X.F., Chen, J.D., Jin, G.C., Arakawa, K. and Takahashi, K. (2004b), 'Caustic analysis of stress singularities in orthotropic composite materials with mode-I crack', Compos. Sci. Tech., 64(7-8), 917-924 https://doi.org/10.1016/S0266-3538(02)00154-9
  19. Yao, X.F., Meng, L.B., Guan, J.C. and Yeh, H.Y. (2005), 'Full field deformation measurement of fibre composite pressure vessel using digital speckle correlation method', Polymer Testing, 24(2), 245-251 https://doi.org/10.1016/j.polymertesting.2004.05.009