DOI QR코드

DOI QR Code

동시 열증발법으로 제조한 SmBCO 고온 초전도에서 박막 조성비가 표면형상 및 초전도 특성에 미치는 영향

The effect of composition ratio on the surface morphology and superconducting properties of SmBCO films prepared by thermal co-evaporation method

  • 이남진 (한국전기연구원 초전도재료연구그룹) ;
  • 김호섭 (한국전기연구원 초전도재료연구그룹) ;
  • 하홍수 (한국전기연구원 초전도재료연구그룹) ;
  • 고락길 (한국전기연구원 초전도재료연구그룹) ;
  • 송규정 (한국전기연구원 초전도재료연구그룹) ;
  • 하동우 (한국전기연구원 초전도재료연구그룹) ;
  • 양주생 (한국전기연구원 초전도재료연구그룹) ;
  • 김태형 (경북대 대학원 금속공학과) ;
  • 정예현 (한국과학기술원 대학원 물리학과) ;
  • 염도준 (한국과학기술원 물리학과) ;
  • 문승현 (주식회사 서남) ;
  • 박찬 (서울대 재료공학부) ;
  • 오상수 (한국전기연구원 초전도재료연구그룹)
  • 발행 : 2007.03.31

초록

We have investigated the superconducting properties and surface morphology of $Sm_xBa_yCu_3O_{6+z}$ thin films deposited on LMO/IBAD-MgO/Hastelloy which prepared with different composition ratio by co-evaporation method(EDDC, Evaporation using Drum in Dual Chambers). We observed the composition ratio of SmBCO thin films by EDS analysis. We fabricated SmBCO thin film with critical current density of $1.5{\times}10^6A/cm^2$ at composition ratio of SM:Ba:Cu=1.10:2.01:3(at 77 K self-field). And, we confirmed that substitution of Sm-Ba did not occur at Cu rich phase by EDS analysis.

키워드

참고문헌

  1. J.L. MacManus-Driscoll, "Recent develop ments in conductor processing of high irreversibility field superconductors," Annu. Rev. Mater. Sci. 28, pp. 421, 1998 https://doi.org/10.1146/annurev.matsci.28.1.421
  2. K.C. Chung, S.C. Choi, H.S. Kim, B.S. Lee, S.M. Ihm, D. Youm, "Growth propert ies and critical current measurements of $Sm_{1+x}Ba_{2-x}Cu_3O_{7-\delta}$ biaxially textur ed Ni tapes," Physica C 384, pp. 291, 2003 https://doi.org/10.1016/S0921-4534(02)01882-8
  3. B.S. Lee, K.C. Chung, S.M. Lim, H.J. Kim, D. Youm and C. Park, "Fabrication of $Sm_1Ba_2Cu_3O_7$ coated conductors using the co-evaporation method," Supercond. Sci. Technol. 17, pp. 580, 2004 https://doi.org/10.1088/0953-2048/17/4/002
  4. Y. Yoshida et. al., "Jc Characteristics in high magnetic field and microstructure of $RE_{1+x}Ba_{2-x}Cu_3O_{6+y}$ films," Physica C 426. 431, pp. 1043, 2005 https://doi.org/10.1016/j.physc.2005.01.059
  5. Y.Iijima, N.Tanabe, N. Kohno, Y.Ikeno, "In-plane aligned $YBa_2Cu_3O_7_{-x}$ thin films deposited on polycrystalline metallic substrate," Appl. Phys. Lett. Vol. 60, pp. 769, 1992 https://doi.org/10.1063/1.106514
  6. John E. Mathis, Amit Goyal, Dominic F. Lee, Fred A. List, M. Paranthaman, David K. Christen, Eliot D. Specht, Donald M. Kroeger and Patrick M. Martin, "Biaxially Textured $YBa_2Cu_3O_7_{-\delta}$ Conductors on Rolling Assisted Biaxially Textured Substrates with Critical Current Densities of 2-3 mA/cm2," Jpn. J. Appl. Phys., Vol. 37, pp. L1379, 1998 https://doi.org/10.1143/JJAP.37.L1379
  7. T. Venkatesan, Xindi Wu, Arun Inam, Chuan C. Chang, Manjanain S. Hegde, and Barundeb Dutta, "Laser Processing of High-Tc Superconducting Thin Films," IEEE J. Quant. Elec., Vol. 25, pp. 2388, 1989 https://doi.org/10.1109/3.42070
  8. Toshio Hirai and Hisanori Yamane, "MOCVD superconducting oxide films," J. cryst. Growth, 107, pp. 683, 1991 https://doi.org/10.1016/0022-0248(91)90542-D
  9. K. Nakaoka, Y. Tokunaga, J.S. Matsuda, H. Fuji, S. Koyama, R. Teranishi, T. Izumi, Y. Shiohara, T. Watanabe, Y. Yamada, T. Goto, A.Yoshinaka, A. Yajima, "Fabrication of YBCO coated conductors using advanced TFA-MOD process," Physica C, Vol. 426-431, pp. 954, 2005 https://doi.org/10.1016/j.physc.2005.02.150
  10. L. Gianni, A. Baldini, M. Bindi, A. Gauzzi, S. Rampino and S. Zannella, "High Jc coated conductors with a simple buffer layer architecture," Physica C, Vol. 426-431 pp. 872, 2005 https://doi.org/10.1016/j.physc.2005.03.037
  11. S.S. Oh, H.S. Kim, H.S. Ha, R.K. Ko, K.J. Song, D.W. Ha, N.J. Lee, J.S. Yang, T.H. Kim, Y.H. Jeong, D.Youm, "SmBCO superconducting tape fabricated using co-evaporation method on Ni-W substrate," J. Korea Ins. Appl. Supercon. and Cryo., Vol. 8, pp. 9, 2006