Journal of Advanced Marine Engineering and Technology

  • 제31권3호
  • /
  • Pages.243-251
  • /
  • 2007
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지
DOI QR코드

DOI QR Code

Study on Heat Transfer Characteristics according to Flowing Particles in a Cold Water Tube

  • 발행 : 2007.05.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This experiment was conducted to investigate the effect of particles on the heat transfer characteristics of fluids flowing in a cold water tube. Plastic beads with 3 different sizes were used as flowing particles with cold water. An experimental test section was composed of concentric double tubes having diameters of 25mm for the inner tube and 50mm for the outer tube. The materials for the inner and outer tubes are copper and PVC respectively. It was found that the particles enhanced the heat transfer coefficient by random and vortex motion in the fluid. Hence the heat transfer coefficients for the fluid with 2mm, 5mm and $2{\times}6mm$ particles were $7%{\sim}37%$ higher than the fluid without the particles.

키워드

참고문헌

  1. Naoki, S. 'Heat transfer enhancement technology and heat exchanger (Heat exchangers for air conditioning)' . Refrigeration, The Japan Society of Refrigeration and Air conditioning Engineers, Vol. 75, No. 875, pp.748-753, 2000
  2. Murata, A. 'Comparison between Laminar and Turbulent heat Transfer in a Stationary Square Duct with Transverse or Angled Rib Turbulators' , Transactions of the Japan Society of Mechanical Engineers, The Japan Society of Mechanical Engineers, Vol. 66, No. 645, pp. 1398-1405, 2000 https://doi.org/10.1299/kikaib.66.1398
  3. Katoh, K, 'Heat transfer enhancement and pressure loss in the channel with a vortex generator' , Transactions of the Japan Society of Mechanical Engineers, The Japan Society of Mechanical Engineers, Vol. 69, NO. 685, pp. 2091-2098, 2003 https://doi.org/10.1299/kikaib.69.2091
  4. Iguchi, 'Utility Valuation for Aid to Friction Resistance Decrease of Pipe', Haikan Gijutsu, Japan Industrial Publishing, Vol. 43, No. 12, pp. 51-55, 2003
  5. Kono, 'Development of Technique to Friction Loss Decrease in Pipe', Haikan Gijutsu, Japan Industrial Publishing, Vol. 43, No. 14, pp. 13-19, 2001
  6. Senaha, I, 'Studies on structure of heat transfer enhancement in tube with longitudinal vortices being generated', Transactions of the Japan Society of Mechanical Engineers, The Japan Society of Mechanical Engineers, Vol. 67, No. 663, pp. 2754-2761, 2001 https://doi.org/10.1299/kikaib.67.2754
  7. Chu, R, 'Heat transfer enhancement of drag-reducing surfactant solution flow in a circular tube', Transactions of the Japan Society of Mechanical Engineers, The Japan Society of Mechanical Engineers, Vol. 68, No. 674, pp. 2856-2861, 2002 https://doi.org/10.1299/kikaib.68.2856
  8. Kumada, M. 'Drag Reduction and Heat Transfer Augmentation of Surfactant Additives in a Two Dimensional Channel Flow', Transactions of the Japan Society of Mechanical Engineers, The Japan Society of Mechanical Engineers, Vol. 65, No. 630, pp. 721-726, 1999 https://doi.org/10.1299/kikaib.65.721
  9. Ki-Won Park, Kyu-Mok Kim, 'Influence of Velocity on Pressure Drop of Flowing Ice Slurry in Elbow and its continued Inclined Tube', Korean journal of Air-Conditioning and Refrigeration Engineering, The Society of Air-Conditioning and Refrigerating Engineers of Korea, Vol. 17, No. 7, pp. 635-641, 2005
  10. Myoung-Jun Kim, Myoung-Hwan kim, 'Heat Transfer Characteristics of Plastic Particle Slurry in a Circular tube Flow', Journal of the Korean Society of Marine Engineers, the Korean Society of Marine Engineers, Vol. 28, No. 3, pp. 451-456, 2004
  11. Hujii, 'Introduction of Cleaning Equipment for Cooler Pipe Using Plastic Particle', Sangyo to denki, Kansai Electric Association, Vol. 606, pp. 17-21, 2003