Abstract
This paper proposes the design scheme of internal triple band antenna intended for using in GSM900, DCS1800, and PCS1900 bands. The suggested folding metal plates of the two branches are mounted on a dielectric coated ground plane for size miniaturization and durability. Return losses are overlapped when length of metal branches are controlled. This is important technique for wide band operation. For the suggested antenna geometry its return loss was calculated by HFSS 9 simulator, and was shown to be -10 [dB] less within the required band. Also, gain and radiation pattern of antenna were measured using far field measurement system in an anechoic chamber. The measured peak gain is more than 3.0 [dBi], and the average gain is over -1.0 [dBi] for the triple band, which is regarded as satisfactory for the internal antenna application. Also, the radiation pattern for two frequencies shows a similar shape each other within the required band.
본 논문은 GSM900, DCS1800, PCS1900 대역을 동시에 만족시킬 수 있는 삼중 대역 안테나 설계에 관한 연구이다. 제안된 구조는 소형화와 견고성을 위해 유전체 위에 2개의 금속 가지를 접어서 만든 형태이다. 금속 가지의 길이를 조정하여 반사 손실을 합성시켜서 광대역을 구현하였다. 안테나의 반사 손실은 모의 실험을 통해 구하였으며, 이를 측정값과 비교하였다. 모의 실험은 상용 툴인 Ansoft사의 HFSS 9를 사용하였고, 수치 비교 결과, 원하는 주파수 대역에서 -10 [dB] 이하의 반사 손실을 얻었다. 또한, 안테나의 이득과 복사 패턴을 원거리장 측정 시스템을 사용하여 전파 무반사실에서 측정하였다. 측정 결과 최대 이득은 3.0 [dBi], 평균 이득은 -1.0 [dBi] 이상의 양호한 특성을 보였으며, 대역 내 2개의 주파수의 복사 패턴은 서로 유사하였다.