References
- Bernardi, D.M., and Verbrugge, M.W., Mathematical Model of a Gas Diffusion Electrode Bonded to a Polymer Electrolyte, AIChE Journal, Vol. 37, No. 8, 1991, pp. 1151-1163 https://doi.org/10.1002/aic.690370805
- Bernardi, D.M., and Verbrugge, M.W., A Mathematical Model of the Solid-PolymerElectrolyte Fuel Cell, J. of Electrochemical Society, Vol. 139, No. 9, 1992, pp. 2477-2491 https://doi.org/10.1149/1.2221251
- Springer, T. E., Zawodzinski, T. A., and Gottesfeld, S., Polymer Electrolyte Fuel Cell Model, J. of Electrochemical Society, Vol. 138, No. 8, 1991, pp. 2334-2342 https://doi.org/10.1149/1.2085971
- Springer, T. E., Wilson, M. S., and Gottesfeld, S., Modeling of Experimental Diagnostics in Polymer Electrolyte Fuel Cells, J. of Electrochemical Society, Vol. 140, No. 12, 1993, pp. 3513-3526 https://doi.org/10.1149/1.2221120
- Fuller T. F., and Newman, J., Water and Thermal Management in Solid-PolymerElectrolyte Fuel Cells, J. of Electrochemical Society, Vol. 140, No. 5, 1993, pp. 1218-1225 https://doi.org/10.1149/1.2220960
- Nguyen, T. V., and White, R. E., A Water and Heat Management Model for Proton-Exchange Membrane Fuel Cells, J. of Electrochemical Society, Vol. 140, No. 8, 1993, pp. 2178-2186 https://doi.org/10.1149/1.2220792
- Amphlett, J. C., Mann, R. F., Peppley, B. A., Roberge, P. R., Rodrigues, A., A model predicting transient responses of proton exchange membrane fuel cells, Journal of Power sources, Vol. 61, 1996, pp.183-188 https://doi.org/10.1016/S0378-7753(96)02360-9
- Francesco, M. D., Arato, E., Start-up analysis for automotive PEM fuel cell systems, Journal of Power Sources, Vol. 108, 2002, pp.41-52 https://doi.org/10.1016/S0378-7753(02)00003-4
- Matthew H. Fronk, David L. Wetter, David A. Masten, and Andrew Bosco, PEM Fuel Cell System Solution for Transportation, 2000, SAE 2000-01-0373
- James A. Adams, Woong-chul Yang, Keith A. Oglesby, and Kurt D. Osborne, The Development of Ford's P2000 Fuel Cell Vehicle, 2000, SAE 2000-01-1061
- Reid, R. C., Prausnitz, J. M., and Poling, B. E., The Properties of Gases & Liquids, McGraw-Hill, New York, 1989, pp. 611-614
- Broka, K., and Ekdunge, P., Modeling the PEM Fuel Cell Cathode, J. of Applied Electrochemistry, Vol. 27, 1997, pp. 281-289 https://doi.org/10.1023/A:1018476612810
- Broka, K., and Ekdunge, P., Oxygen and Hydrogen Permeation Properties and Water Uptake of Nation 117 Membrane and Recast Film for PEM Fuel Cell, J. of Applied Electrochemistry, Vol. 26, 1996, pp. 117-123
- Incropera, F.P., and DeWitt, D.P., Fundamentals of Heat and Mass Transfer, JOHN WILEY & SONS, New York, Fourth Edition, 1996, pp. 420-450
- Jung, D., Assanis, D. N., Numerical Modeling of Cross Flow Compact Heat Exchanger with Louvered Fins using Thermal Resistance Concept, 2006, SAE 2006-01-0726
- Ap, N., Guerrero, P., and Jouanny, P., Influence of Fan System Electric Power on the Heat Performance of Engine Cooling Module, 2003, SAE 2003-01-0275
- Yu. S., Thermal modeling of the proton exchange membrane fuel cell, Ph.D. Dissertation, 2006, University of Michigan