International Journal of Concrete Structures and Materials

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Experimental Observation on Bond-Slip Behavior between Concrete and CFRP Plate

  • Yang, Dong-Suk (Dept. of Civil Engineering, University of Sherbrooke) ;
  • Hong, Sung-Nam (Dept. of Civil Engineering, Sungkyunkwan University) ;
  • Park, Sun-Kyu (Dept. of Civil Engineering, Sungkyunkwan University)
  • Published : 2007.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper discusses the failure mode of reinforced concrete beams strengthened with composite materials based on six experimental set-ups to determine the FRP-to-concrete bond strength. Interfacial bond behavior between concrete and CFRP plates was discussed. Shear test were performed with different concrete compressive strengths (21 MPa and 28 MPa) and different bonding length (100 mm, 150 mm, 200 mm, and 250 mm). Shear test results indicate that the effective bond length (the bond length beyond which the ultimate load does not increase) was estimated as $196{\sim}204\;mm$ through linear regression analysis. Failure mode of specimens occurred due to debonding between concrete and CFRP plates. Maximum bond stress is calculated as about $3.0{\sim}3.3\;MPa$ from the relationships between bond stress and slip. Finally, the interfacial bond-slip model between CFRP plates and concrete, which is governed debonding failure, has been estimated from shear tests. Average bond stress was about $1.86{\sim}2.04\;MPa$, the volume of slip between CFRP plate and concrete was about $1.45{\sim}1.72\;mm$, and the fracture energy was found to be about $1.35{\sim}1.71\;N/mm$.

Keywords

References

  1. Alfarabi, S. A., Al-Sulaaimani, G. J,. and Basunbul, I. A., "Strengthening of Initially Loaded Reinforced Concrete Beams Using FRP Plates," ACI Structural Journal, Vol.91, 1994, pp.160-168
  2. Arduini, M., Tommaso, A., and Nanni, A., "Brittle Failure in FRP Plate and Sheet Bonded Beams," ACI Structural Journal, Vol.94, No.4, 1997, pp.363-370
  3. Bizindavyi, L. and Neale, K. W., "Transfer Lengths and Bond Strengths for Composites Bonded to Concrete," Journal of Composites for Construction, ASCE, Vol.3, No.4, 1999, pp.153-160 https://doi.org/10.1061/(ASCE)1090-0268(1999)3:4(153)
  4. Brosens, K. and Gemert, D., "Anchoring Stresses between Concrete and Carbon Fibre Reinforced Laminates," Proceedings of the Third International Symposium on Non-metallic (FRP) Reinforcements for Concrete Structures, Sapporo, Vol.1, 1997, pp.271-278
  5. Chen, J. F. and Teng, J. G., "Anchorage strength models for FRP and Steel Plates Boned to Concrete," Journal of Structural Engineering, Vol.127, No.7, 2001, pp.784-791 https://doi.org/10.1061/(ASCE)0733-9445(2001)127:7(784)
  6. Fanning, P. J. and Kelly, O., "Ultimate Response of RC Beams Strengthened with CFRP Plates," Journal of Composites for Construction, ASCE, Vol.5, No.2, 2001, pp.122-127 https://doi.org/10.1061/(ASCE)1090-0268(2001)5:2(122)
  7. KICT, Development of New Technology on Strengthening RC Structures with Externally Post-Tensioning CFRP Strips (1st Year), Korea Institute of Construction Technology, 2004, In Korean
  8. Mander, J. B., Priestley, M. J., and Park, R., "Theoretical Stress-strain Model for Confined Concrete," Journal of Structural Engineering, ASCE, Vol.114, No.8, 1988, pp.1804-1849 https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  9. Malek, A. M., Saadatmanesh, H., and Ehsani, M. R., "Prediction of Failure Load of R/C Beams Strengthened with FRP Plate due to Stress Concentration at the Plate End," ACI Structural Journal, Vol.95, No.1, 1998, pp.142-152
  10. Michel, J., Chajes, T. F., Januszka, D. R., Mertz, T. A., Thomson, J. R., and Willam W. F., "Shear Strengthening of Reinforced Concrete Beams Using Externally Applied Composite Fabrics," ACI structural Journal, 1995, pp.295-303
  11. Mukhopadhyaya, P. and Swamy, R. N., "Interface Shear Stress: a New Design Criterion for Plate Debonding," Journal of Composites for Construction, ASCE, Vol.5, No.1, 2001, pp.35-43 https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(35)
  12. Naaman, A. E. and Alkhairi, F. M., "Stress ay Ultimate in Unbonded Post-tensioning Tendon: Part 2-Proposed Methodology," ACI Structural Journal, Vol.88, No.6, 1991, pp.683-690
  13. Oehlers, D. J., "Reinforced Concrete Beams with Plates Glued to Their Soffits," Journal of Structural Engineering, ASCE, Vol.118, No.8, 1992, pp.2023-2038 https://doi.org/10.1061/(ASCE)0733-9445(1992)118:8(2023)
  14. Park, S. K. and Yang, D. S., "Flexural Ehavior of Reinforced Concrete Beams with Cementitious Repair Materials," Materials and Structures, Vol.38, 2005, pp.329-334 https://doi.org/10.1617/14051
  15. Rahimi, H. and Hutchinson, A., "Concrete Beams Strengthened with Externally Bonded FRP Plates," Journal of Composites for Construction, ASCE, Vol.5, No.1, 2001, pp.44-56 https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(44)
  16. Smith, S. T. and Teng, J. G., "FRP-Strengthening RC Beams, Ii: Assessment of Debonding Strength Models," Engineering Structures, Vol.24, 2002, pp.397-417 https://doi.org/10.1016/S0141-0296(01)00106-7
  17. Smith, S. T. and Teng, J. G., "Shear-Bending Interaction In Debonding Failures of FRP-Plated RC Beams," Advanced Structure Engineering, Vol.6, No.3, 2003, pp.183-200 https://doi.org/10.1260/136943303322419214
  18. Teng, J. G., Smith, S. T., Yao, J., and Chen, J. f., "Intermediate Crack-induced Debonding in RC Beams and Slabs," Construction and Building Materials, 2003, pp.447-462
  19. Yao, J., Teng, J. G., and Chan, J. F., "Experimental Study on Frp-to-concrete Bonded Joints," Composites Part B-Engineering, Vol.36, 2005, pp.99-113 https://doi.org/10.1016/j.compositesb.2004.06.001
  20. Ziraba, Y. N., Baluch, M. H., Basunbul, A. M., Sharif, I. A., Azad, A. K., and Al-Sulaimani, G. J., "Guidelines Towards the Design of Reinforced Concrete Beams with External Plates," ACI structural Journal, Vol.91, No.6, 1994, pp.639-646

Cited by

  1. A State-of-the-Art Review on Debonding Failures of FRP Laminates Externally Adhered to Concrete vol.6, pp.2, 2012, https://doi.org/10.1007/s40069-012-0012-1
  2. Evaluation of Parameters of Bond Action between FRP and Concrete vol.17, pp.5, 2013, https://doi.org/10.1061/(ASCE)CC.1943-5614.0000378
  3. Performance of Reinforced Concrete Beams Strengthened with CFRP Composite in Corrosive Environment vol.250-253, pp.1662-8985, 2011, https://doi.org/10.4028/www.scientific.net/AMR.250-253.3706