DOI QR코드

DOI QR Code

거친 표면의 마찰온도 해석 및 온도측정 실험에 관한 연구

Analysis and Measurement of Rough Surface Temperature Rise in Lubricated Condition

  • Lee, Sang-Don (Precision and Mechanical Engineering, Pusan National Univ.) ;
  • Cho, Yong-Joo (School of Mechanical Engineering, Pusan National Univ.)
  • 발행 : 2007.04.30

초록

The main object of this study is to compare the results that have been concluded by the experiment and to estimate the temperature rise that can cause the contacting surface to be damaged. The former studies are based on the Blok and Jaeger formula. By these formulas we assume that two of the contacted objects are a kind of semi-infinite solid and with this assumption we can make a temperature analysis. But this method doesn't consider lubrication conditions and the calculation time requires a lot of time in that we have to face many difficulties in measuring the actual temperature rise. In this study we combines the semi-infinite solid method and the finite volume method to analyze the temperature of the contacting surface. And we measure temperature rise of the contact surface by dynamic thermocouple.

키워드

참고문헌

  1. Blok, H., 'Theoretical Study of Temperature Rise at Surfaces of Actual Contact under Oiliness Lubricating Condition,' Proc. General Discussion on Lubrication, Inst, Mech, Engrs., London, Vol. 2, pp. 222-235, 1937
  2. Jaeger, J.C., 'Moving Sources of Heat and the Temperature at Sliding Contacts,' J. Proc. Roy, Soc., N.S.W., Vol. 76, pp. 203-224, 1942
  3. Archard, J.F., 'The Temperature of rubbing Surfaces,' Wear, Vol. 2, pp. 439-455, 1958
  4. Francis, H.A., 'Interfacial Temperature Distribution within a Sliding Hertian Contact,' ASLE Transaction, Vol. 14, pp. 41-54, 1970
  5. Qiu, L. and Cheng, H.S., 'Temperature Rise Simulation of Three-Dimensional Rough Surface in Mixed Lubricated Contact,' ASME Journal of Tribology, Vol. 120, pp. 310-318, 1998 https://doi.org/10.1115/1.2834427
  6. Lai, W. T. and Cheng, H. S., 'Computer Simulation of Elastic Rough Contact,' ASLE Trans., Vol. 28, No.2, pp. 172-180, 1985 https://doi.org/10.1080/05698198508981609
  7. O. S. Dinc, 'The measurement of surface temperature in dry or lubricated sliding,' Transactions of the ASME, Vol. 115, pp. 78-82, January, 1993 https://doi.org/10.1115/1.2920989
  8. 김태완, 이상돈, 조용주, 'FVM과 반무한체 해석을 이용한 표면온도예측에 관한 연구,' 한국윤활학회지, 제 18권, 제6호, pp. 389-395, 2002