References
-
M. Nawa, T. Sekino, and K. Niihara, 'Microstructure and Mechanical Properties of
$Al_2O_3$ /Mo Nanocomposites,' Japan Society of Powder and Powder Metallurgy, 39 [12] 1104-08 (1992) https://doi.org/10.2497/jjspm.39.1104 - H. Awaji, 'Strength of Ceramic Materials,' Corona Pub., Tokyo, pp. 1-8, 2001
- S. M. Choi, S. Honda, T. Nishikawa, H. Awaji, T. Sekino, and K. Niihara, 'Strengthening Mechanism in Alumina Matrix Nanocomposites,' J. Soc. Mat. Sci., Japan, 52 [11] 1374-78 (2003) https://doi.org/10.2472/jsms.52.1374
- K. Niihara and A. Nakahira, 'Particulate Strengthened Oxide Ceramics-Nanocomposites,' pp. 637-44, Advanced Structural Inorganic Composites Ed. by, P. Vincenzini, Elsevier Science Publishers B. V., 1991
- N. Claussen, J. Steeb, and R. F. Pabst, 'Effect of Induced Microcracking on the Fracture Toughness of Ceramics,' Am. Ceram. Soc. Bull. 56 [6] 559 (1977)
-
J. Lankford, 'Tensile Failure of Unflawed Polycrystalline
$Al_2O_3$ ,' J. Mater. Sci., 13 351-7 (1978) https://doi.org/10.1007/BF00647780 - K. Niihara, 'New Design Concept of Structural Ceramics- Ceramic Nanocomposites,' J. Ceram. Soc. Jpn., 99 974-81 (1991) https://doi.org/10.2109/jcersj.99.974
-
R. P. Wahi and B. Ilschner, 'Fracture Behavior of Composites Based on
$Al_2O_3$ -TiC,' J. Mater. Sci., 15 875-85 (1980) https://doi.org/10.1007/BF00552097 - F. F. Lange, 'Transformation Toughening,' J. Mater. Sci., 17 225-39 (1982) https://doi.org/10.1007/BF00809057
- P. F. Becher and G. C. Wei, 'Toughening Behavior in SiC-Whisker- Reinforced Alumina,' J. Am. Cram. Soc., 67 C- 267-69 (1984) https://doi.org/10.1111/j.1151-2916.1984.tb19694.x
-
H. Kondo, T. Sekino, Y. H. Choa, and K. Niihara, 'Mechanical Properties of 3Y-
$ZrO_2$ /Ni Composites Prepared by Reductive Sintering,' Key Eng. Mater., 161-163 419-22 (1999) https://doi.org/10.4028/www.scientific.net/KEM.161-163.419 - L. Donzel and S. G. Roberts, 'Microstructure and Mechanical Properties of Cubic Zirconia (8YSZ)/SiC Nanocomposites,' J. Euro. Ceram. Soc., 20 2457-62 (2000) https://doi.org/10.1016/S0955-2219(00)00117-5
- T. Ohji, Y. K. Jeong, Y. H. Choa, and K. Niihara, 'Strengthening and Toughening Mechanisms of Ceramic Nanocomposites,' J. Am. Ceram. Soc., 81 [6] 1453-60 (1998) https://doi.org/10.1111/j.1151-2916.1998.tb02503.x
- H. Awaji and S.-M. Choi, 'Review: Ceramic-Based Nano- Composites in: S.G.,' Pandalai (Ed.), Recent Research Developments in Materials Science & Engineering, 1 585- 97 (2002)
- W. B. Chou and W. H. Tuan, 'Toughening and Strengthening of Alumina with Silver Inclusions,' J. Euro. Ceram. Soc., 15 291-95 (1995) https://doi.org/10.1016/0955-2219(95)90351-I
- M. Tokita, 'Development of Automatic FGM Manufacturing Systems by the Spark Plasma Sintering (SPS) Method, Functionally Graded Materials 2000,' in: K. Trumble, K. Bowman, I. Reimanis, S. Sampath (Eds.), Ceramic Transactions, 114 283-90 (2001)
- H. Awaji and Y. Sakaida, 'V-notch Technique for Singleedge Notched Beam and Chevron Notch Methods,' J. Am. Ceram. Soc., 73 [11] 3522-23 (1990) https://doi.org/10.1111/j.1151-2916.1990.tb06490.x
- R. W. Davidge, 'Effect of Microstructure on the Mechanical Properties of Ceramics, Fracture Mechanics of Ceramics vol. 2,' pp. 447-68, in: R. C. Bradt, D. P. H. Hasselman, F. F. Lange (Eds.) Plenum Press, New York, 1973
Cited by
- Toughening mechanism and frontal process zone size of ceramics vol.117, pp.1365, 2009, https://doi.org/10.2109/jcersj2.117.623