DOI QR코드

DOI QR Code

자동차 산업에서의 OCRA Checklist와 RULA 평가 비교

Comparison of assessment by OCRA Checklist and RULA at an auto Manufacturing Plant

  • 이관석 (홍익대학교 정보산업공학과) ;
  • 정민수 (홍익대학교 정보산업공학과) ;
  • 전성재 (홍익대학교 정보산업공학과) ;
  • 천영지 (홍익대학교 정보산업공학과) ;
  • 김재형 (홍익대학교 정보산업공학과)
  • 발행 : 2007.11.30

초록

Due to the high occurrence rate of musculoskeletal disorders(MSDs), many Korean companies adopted various assessment tools to evaluate workers' musculoskeletal stress. Using the results of this evaluation, tasks were selected for improvements. However, there are still many workers who complained of musculoskeletal stress of their tasks. Their tasks usually consist of repetitive activities and a short rest cycle. This prompts a concern of reliability of the evaluation tools and especially RULA. Thus in this study, OCRA(The Occupational Repetitive Action tool) was used to check whether RULA(Rapid Upper Limb Assessment) evaluates workers' musculoskeletal stress reasonably well since OCRA has been known to be a good evaluation tool for repetitive tasks and tasks with short recovery periods. The evaluation was conducted on 142 tasks. It was found that 65 tasks showed higher action levels by OCRA than by RULA. However, 13 tasks showed the reversed result and 64 tasks showed the same level regardless of the evaluation tool. It was concluded that either RULA or OCRA alone cannot evaluate all types of tasks very well. It is suggested that OCRA needs to be used with RULA together for the evaluations of musculoskeletal stress at workplaces where repetitive activities and short recovery periods exist.

키워드

참고문헌

  1. 기도형, 박기현, '작업자세 평가기법 OWAS, RULA, REBA 비교', 한국안전학회지 Vol. 20, No.2(pp.127-132), 2005.
  2. 기도형, '외부부하, 동작반복 효과가 반영된 자세 분류 체계의 개 발', 대한인간공학회지 Vol. 26, No.1(pp.39-46), 2007 https://doi.org/10.5143/JESK.2007.26.1.039
  3. 이인석, 정민근, 최경임, '지각불편도를 이용한 관찰적 작업자세 평가기법의 비교', 대한인간공학회지, Vol.22 No.1 (pp. 45-56), 2003
  4. Stanton, A. H., Karel, B., Eduardo, S. and Hal, H., The handbook of human factors and ergonomics methods, Neville Stanton, Boca Raton, chap.15 The Occupational Repetitive Action(pp.1-14), CRC Press, 2005
  5. Hignett, S. and McAtamney, L., 'Rapid Entire Body Assessment(REBA).' Applied Ergonomics, 31(pp.201-205), 2000 https://doi.org/10.1016/S0003-6870(99)00039-3
  6. McAtammney, L. and Corelett, N., 'RULA: A survey method for the investigation of work-related upper limb disorders', Applied Ergonomics, 24(pp. 91-99), 1993 https://doi.org/10.1016/0003-6870(93)90080-S
  7. Occhipinti, E. and Colombini, D., 'Alterazioni muscolo-scheletriche degli arti superiori da sovaraccarico: metodi e criteri per l'inquadramento dell'esposizione lavorativa', Med. Lav., 87(pp.491-525), 1996
  8. Karhu, O., Kansi, P. and Kuorinka, I., 'Correcting working postures in industry: A Practical method for analysis.' Applied Ergonomics, 8(4) (pp.199-201), 1997 https://doi.org/10.1016/0003-6870(77)90164-8
  9. Zetterberg, C., Forsberg, A., Hansson, E., Johansson, H., Nielsen, P., Danielsson, B., Inge, G. and Olsson B. M, 'Neck and upper extremity problems in car assembly workers. A comparison of subjective complaints, work satisfaction, physical examination and gender', International Journal of Industrial Ergonomics, Vol 19 No.4(pp. 277 -289), 1997 https://doi.org/10.1016/S0169-8141(96)00037-6

피인용 문헌

  1. Development and Application of a Checklist for Analysis of Non-repetitive Work in Construction Industry vol.29, pp.3, 2010, https://doi.org/10.5143/JESK.2010.29.3.321
  2. The Desirable Direction for the Future of Prevention of Work-related Musculoskeletal Disorders in Korea vol.29, pp.4, 2010, https://doi.org/10.5143/JESK.2010.29.4.513
  3. Ergonomics' Role for Preventing Musculoskeletal Disorders vol.29, pp.4, 2010, https://doi.org/10.5143/JESK.2010.29.4.393