Development of the Automative Correction System for the Digital Over-current Relay With Distribution System

배전계통에서의 디지털 과전류 계전기 자동 정정 시스템 개발

  • 백영식 (경북대학교 전자전기컴퓨터학부) ;
  • 이호준 (경북대학교 전기공학과)
  • Published : 2007.04.01

Abstract

In the distribution system, Change of system happens frequently. However, most of the relays are operated manually by a person or not changed when system changed. So, when fault happened, a case that relaydoes not act rapidly happens. Also, in current power system, digital relays are used because of digitization of relay. Digital relay has very many advantages than existing analog relay. One of these advantages is that communication is available and easily can make characteristic curve. If specific values are sent to a relay by communication, A relay can make suitable characteristic curve according to the value. In this paper, by using voltages and currents measured by relay, state of CB(Circuit Breaker) and these relays, SCADA(Supervisory Control And Data Acquisition) system that control and correct characteristic curve of overcurrent relay at system change by using HMI(Human Machine Interface) is proposed.

Keywords

References

  1. Mohindar S.Sachdev, Ratan Das, 'Understanding Microprocessor-Based Technology Applied to Reaying', 현대중공업 전기전자시스템 사업부, Fabruary 2004
  2. 이창호,'과부하 상태의 변동을 고려한 디지털 보호계 전기의 최적보호 알고리즘 연구', 석사학위논문, 경북대학교, 2005
  3. D. Baigent, E. Lebenhaft, 'Microprocessor-Based Protection Relay: Design and Application Examples', IEEE Trans. on Industry Application, Vol. 29, No.1, JAN. 1993
  4. 윤준석, 최면송, 이승재, 현승호 '계통변화를 고려한 자율 적응형 과전류 계전기', 대한 전기학회 논문지 8호, 52권, pp. 444-449, 2003
  5. A.M. Chebbo, M. R. Irving, M.J,H. Sterlin, 'Voltage collapse proximitly indicator : behavior and implications', IEEE Trans. Power Systems, col.10, pp.788-794, 1995. 5 https://doi.org/10.1109/59.387918
  6. K. Vu, M. M. Begovic, D. Novosel, M.M.Saha, 'Use of local measurements to estimate voltage-stability margin', IEEE Trans. Power System, vol. 14, pp. 1029-1035, 1999. 8 https://doi.org/10.1109/59.780916
  7. S.M.Brahma, A.A. Girgis, 'Development of Adaptive Protection Scheme for Distribution System With High Penetration of Distributed Generation', IEEE Trans on Power Delivery, Vol. 19, No.1, JAN. 2004
  8. A. R. Bergen, V. Vittal, 'Power System Analysis 2nd edition', Prentice-Hall, 2000
  9. Sam F. Farag, M. K. Jhaveri, 'Intelligent Microprocessor -Based Device Provide Advanced Motor Protection, Flexible control and Communication in Paper Mills', IEEE Trans. Industry Applications, Vol. 33, No.3, May/June 1997
  10. Drew Baigent, Ed Lebenhaft, 'Microprocessor-Based Protection Relays : Design and Application Examples', IEEE Trans. Industry Applications, Vol. 29, No.1, Jan./Feb. 1993
  11. J. A. Jiang, C. L. Tseng, C. S. Yu, Y. C. Wang, C. S. Chen, 'Digital protective relaying algorithms for double circuit lines protection', ICPC 2002 on Power System Technology, Vol. 4, pp. 2551-2555, Oct 2002
  12. Murty, V. V. S. Yalla, 'A Digital Multifunction Protective Relay', IEEE Trans. Power Delivery, Vol. 7, No.1, pp. 193-201, Jan. 1992 https://doi.org/10.1109/61.108907
  13. 신대승, '보호계전시스템', 기다리, 2000
  14. 유상봉, 임성준, 강창원, 이순형, 한찬호, 박용덕, 진명수, 김정철, '보호계전 시스템의 실무활용기술', 기다리, 2002
  15. 이성환, 박상배, 안인석, '디지털 계전기를 이용한 전력감시 및 분산제어', 한국산업응용학회지, 제4권, 제3호, 263-266, 2001. 8
  16. 서희석, 권기백, 'DSP를 이용한 변압기용 디지털 보호계전기 설계에 관한 연구', 대한조명.전기설비학회논문지, 제 17권, 제6호, 2003.11