참고문헌
- P. B. Lindley, 'Load-Compression Relationships of Rubber Units', J. Strain Analysis, Vol. 1, No. 3, pp. 190-195, 1966 https://doi.org/10.1243/03093247V013190
- P. B. Lindley, 'Compression Characteristics of Laterally- Unrestrained Rubber O-Rings', J. IRI, Vol. 1, pp. 202-213, 1967
- A. F. George, A. Strozzi, A. and J. I. Rick, 'Stress Field in a Compressed Unconstrained Elastomeric O-ring seal and a Comparison of Computer Predictions and Experimental Results', Tribology, Vol. 20, No.5 , pp. 237-247, 1987 https://doi.org/10.1016/0301-679X(87)90023-5
- A. Karaszkiewicz, 'Geometry and Contact Pressure of an O-ring Mounted in a Seal Groove', Ind. Eng. Chem. Res. 29, pp. 2134-2137, 1990 https://doi.org/10.1021/ie00106a025
- K. Yokoyama, M. Okazaki, and T. Komito, 'Effect of Contact Pressure and Thermal Degradation on the Sealability of O-ring', JSAE Review, Vol. 19, pp. 123-128, 1998 https://doi.org/10.1016/S0389-4304(97)00070-2
- H. Johannesson, 'Calculation of the Pressure Distribution in an O-Ring Seal Contact', Proc. 5th Leeds-Lyon Symposium on Tribology, Leeds, Sep., pp. 379-387, 1978
- P. G .Molari, 'Stresses in O-ring Gaskets', 6th Int. Conf. on fluid sealing, Munich, German Federal Republic, pp. B2-15-B2-31, 1973
- 박성한, 김재훈, '단 측벽 구속하에서 압축 및 압력을 받는 고무 오링의 구조 해석', 한국안전학회지, 제22권, 제5호, 게제예정, 2007
- D. R. Pearl, 'O-Ring Seals in the Design of Hydraulic Mechanics', SAE Quarterly Transactions, Vol. 1 No. 4, pp. 602-611, 1947
- T. S. Kazimierz, 'Seal Extrusion', Lubrication Engineering, pp. 198-205, 1970
- B. M. Golerik and G.I. Fel'dman, 'Failure of Rubber Sealing Rings of Circular Transverse Section under the Action of Stresses', Soviet Rubber Technology, No. 4, pp. 21-23, 1964
- MIL-P-5514E, 'Packings; Installation and Gland Design, Hydraulic, General Requirements for'
- D. Reddy and B. S. Nau., 'The Static and Dynamic Extrusion of Elastomer Seals into Large Clearances', 10th Int. Conf. Fluid Sealing, Innsbruck, Austria, pp. 189-196, 1984
- T. Raparelli, A. M. Bertetto, L. Mazza, 'Experimental Study of Pneumatic Seal Extrusion', Tribology Transactions, Vol. 40, No.4, pp. 715-719, 1977 https://doi.org/10.1080/10402009708983713
- R. Eshel, 'Prediction of Extrusion Failures of O-Ring Seals', ASLE Transactions Vol. 27, No. 4, pp. 332-340, 1984 https://doi.org/10.1080/05698198408981578
- 김동륜, 김재훈, 박성한, 이환규, '전산화 단층촬영에 의한 오링 변형 거동 분석', 한국 비파괴 검사학회지 게제 예정
- S. P. Madhav, 'Quality Engineering Using Robust Design', Prentice Hall, Englewood Cliffs, New Jersey, 1989
- 염봉진, 고선우, 김성준, '제품 및 공정 설계를 위한 다구찌 방법', 한국과학기술원 경영과학, 제7권, 제2호, 12월, 1990