References
- Chen, Z.C., Vickers, G.W., and Dong, Z. (2004), A new principle of CNC tool path generation for three-axis sculptured part machining – a steepest-ascending tool path, Journal of Manufacturing Science and Engineering, 126, 515-523 https://doi.org/10.1115/1.1765147
- Lee, S.G., and Yang, S.H. (2002), CNC Tool-path planning for high speed high resolution machining using a new tool-path calculation algorithm, International Journal of Advanced Manufacturing Technology, 20, 326-333 https://doi.org/10.1007/s001700200159
- Lai, X.D., Zhou, Y.F., Zhou, J., Peng, F.Y., and Yan, S.J. (2003), Geometric error analysis and control for 5-axis machining of large sculptured surfaces, International Journal of Advanced Manufacturing Technology, 21, 110-118
- Park, S.C., and Chung, Y.C. (2003), Tool-path generation from measured data, Computer-Aided Design, 35, 467-476 https://doi.org/10.1016/S0010-4485(02)00070-2
- Rao, N., Ismail, F., and Bedi, S. (1997), Tool path planning for five-axis machining using the principal axis method, International Journal of Machine Tools and Manufacture, 37, 1025-1040 https://doi.org/10.1016/S0890-6955(96)00046-6
- Flutter, A., and Todd, J. (2001), A machining strategy for toolmaking, Computer-Aided Design, 33, 1009-1022 https://doi.org/10.1016/S0010-4485(00)00136-6
- Gray, P., Bedi, S., and Ismail, F. (2003), Rolling ball method for 5-axis surface machining, Computer-Aided Design, 35, 347-357 https://doi.org/10.1016/S0010-4485(02)00056-8
- Kayal, P. (2007), Offset error analysis of ball-end mill for cutter path generation from point-based surfaces, International Journal of Advanced Manufacturing Technology, (press)
- Feng, H.Y., and Teng, Z. (2005), Iso-planar piecewise NC tool path generation from discrete measured data points, Computer-Aided Design, 37, 55-64 https://doi.org/10.1016/j.cad.2004.04.001
- Sarma, R., and Dutta, D. (1996), Machining surfaces composed of cyclide patches, Computers in Industry, 31, 129-142 https://doi.org/10.1016/0166-3615(96)00035-8
- Lee, Y.S., and Chang, T.C. (1996), Automatic cutter selection for 5-axis sculptured surface machining,. International Journal of Production Research, 34, 977-998 https://doi.org/10.1080/00207549608904946
- Bala, M. and Chang, T.C. (1991), Automatic cutter selection and optimal cutter path generation for prismatic parts, Internal Journal of Production Research, 29, 2163-2176 https://doi.org/10.1080/00207549108948076
- Yao, Z., Gupta, S.K., and Nau, D.S. (2003), Algorithm for selecting cutters in multi-part milling problems, Computer-Aided Design, 35, 825-839 https://doi.org/10.1016/S0010-4485(02)00110-0
- Yang, D.C.H., and Han, Z. (1999), Interference detection and optimal tool selection in 3-axis NC machining of free-form surfaces, Computer Aided Design, 31, 303-315 https://doi.org/10.1016/S0010-4485(99)00031-7
- Glaeser, G., Wallner, J., and Pottmann, H. (1999), Collision-free 3-axis milling and selection of cutting tools, Computer Aided Design, 31, 225-232 https://doi.org/10.1016/S0010-4485(99)00018-4
- Jensen, C.G., Red, W.E., and Pi, J. (2002), Tool selection for five-axis curvature matched machining, Computer-Aided Design, 34, 251-266 https://doi.org/10.1016/S0010-4485(01)00086-0
- OuYang, D., Nest, B.A.V., Feng, H.Y. (2005), Determining gouge-free ball-end mills for 3D surface machining from point data, Robotics and Computer-Integrated Manufacturing, 21, 338-345 https://doi.org/10.1016/j.rcim.2004.10.003
- Kayal, P. (2007), Inverse offset method for adaptive cutter path generation from point-based surface, International journal of CAD/CAM, 7, 1-15
- Marciniak, K. (1991), Geometric Modelling for Numerically Controlled Machining, Oxford University press
- Lo, C.C. (2000), Two stage cutter-path scheduling for ball-end milling of concave and wall-bounded surfaces, Computer-Aided Design, 32, 597-603 https://doi.org/10.1016/S0010-4485(00)00033-6
- Kayal, P. (2007), A point-based approach for cutter path generation using fillet-end mill, Computer-Aided Design, (press)
- Todd, P.H., and McLeod, R.J.Y. (1986), Numerical estimation of the curvature of surfaces, Computer-Aided Design, 18, 33-37 https://doi.org/10.1016/S0010-4485(86)80008-2
- Dyn, N., Levin, D., and Gregory, J.A. (1987), A 4-point interpolatory sub-division scheme for curve design, Computer-Aided Geometric Design, 4, 257-268 https://doi.org/10.1016/0167-8396(87)90001-X
- Ali, J.M., Tookey, R.M., and Ball, J.V. (1999), The generalised Cornu spiral and its application to span generation, Journal of Computational and Applied Mathematics, 102, 37-47 https://doi.org/10.1016/S0377-0427(98)00207-6