Journal of Electrical Engineering and Technology

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

Design and Analysis of Axial Flux Permanent Magnet Synchronous Machine

  • Jo, Won-Young (Department of Electrical Engineering, Dong-A University) ;
  • Lee, In-Jae (Department of Electrical Engineering, Dong-A University) ;
  • Cho, Yun-Hyun (Dept. of Electrical Engineering, Dong-A University) ;
  • Koo, Dae-Hyun (Mechatronics Research Group, Industry Applications Research Laboratory, Korea Electrotechnology Research Institute) ;
  • Chun, Yon-Do (Mechatronics Research Group, Industry Applications Research Laboratory, Korea Electrotechnology Research Institute)
  • Published : 2007.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this article, a special kind of axial flux permanent magnet machine has proved to be suitable for high torque and low speed applications. An innovative design of the machine has been proposed in order to make the machine suitable for traction applications by means of field-weakening. The aim of this paper is to analyze, in general terms, the basic equations that describe the operating conditions of such machines. Optimal sizes for design can be obtained by calculating the power density and the air-gap flux density, etc.

Keywords

References

  1. M. Cirani, P. Thelin and C. Sadarangani, 'Design procedure for an AFPM machine for field-weakening applications', Proceedings of the Nordic Workshop on Power and Industrial Electronics, NORpie 2002, Stockholm, Sweden, August
  2. F. Caricchi, F. Crescimbini, E. Fedeli and G. Noia, 'Design and Construction of a Wheel-Coupled Axial-Flux PM Motor Prototype for EVs', Conf. Record of the 1994 Ind. Appl. Conference, Denver, Colorado, USA, col. 1, pp. 254-261, Oct. 1994
  3. P. Campbell, 'The Magnetic Circuit of an Axial Field DC Electrical Machine', IEEE Trans. on Magnetics, pp. 1541-1543, Sept. 1975
  4. C.C. Chan, 'Axial-Field Electrical Mahines-Design and Application', IEEE Trans. on Energy Conversion, pp. 294-300, June 1987
  5. R. Wallace, L. Moran, G. Cea, F. Peraz, 'Design and Construction of Medium Power Axial Flux Induction Motors', IEE Electrical Machines and Drives, pp. 260-265, Sep 1991
  6. M. Aydin, S. Husang, and T. A. Lipo, 'Optimum design and 3D finite element analysis of non-slotted and slotted internal rotor type axial flux PM disc machines', Power Engineering Society Summer Meeting, pp. 1409-1416, 2001
  7. F. Caricchi, F. Crescimbini, O. Honorati, and E. Santini, 'Performance evaluation of an axial flux PM generator', Proceedings of International Conference on Electrical Machines (ICEM), pp. 761-765, 1992
  8. R. J. Hill-Cottingham, P. C. Coles, J. F. Eastham, F. Profumo, A. Tenconi, G. Gianolio, 'Multi-disc axial flux stratospheric propeller drive', Proc. of IEEE IAS Annual Meeting Conference Record 2001, vol. 3, pp. 1634-1639, 2001
  9. F. Caricchi, F. Crescimbini, O. Honorati, Modular, 'Axial-flux permanent magnet motor for ship propulsion drives', IEEE Trans. on Energy Conversion, vol. 14, pp. 673-679, 1999 https://doi.org/10.1109/60.790934
  10. Z. Q. Zhu and D. Howe, 'Influence of design parameters on cogging torque in permanent magnet motors', IEEE Transactions on Energy Conversion, Vol. 15, No. 4, pp. 2000

Cited by

  1. Multiobjective Optimal Design for Interior Permanent Magnet Synchronous Motor vol.45, pp.3, 2009, https://doi.org/10.1109/TMAG.2009.2012820
  2. Design procedure of coreless stator PM axial field synchronous machine for small-scale wind applications 2017, https://doi.org/10.1007/s00202-017-0540-4
  3. Residual Magnetic Flux Density Distribution Calculation Considering Effect of Aligning Field for Anisotropic Bonded NdFeB Magnets vol.11, pp.5, 2016, https://doi.org/10.5370/JEET.2016.11.5.1316
  4. Demagnetization Analysis of Permanent Magnets According to Rotor Types of Interior Permanent Magnet Synchronous Motor vol.45, pp.6, 2009, https://doi.org/10.1109/TMAG.2009.2018661
  5. Dynamic Design of a Mass-Spring Type Translational Wave Energy Converter vol.21, pp.1, 2012, https://doi.org/10.7735/ksmte.2012.21.1.182
  6. Field Reconstruction Method in Axial Flux Permanent Magnet Motor With Overhang Structure vol.53, pp.6, 2017, https://doi.org/10.1109/TMAG.2017.2653839