한국주조공학회지 (Journal of Korea Foundry Society)

  • 제27권3호
  • /
  • Pages.135-139
  • /
  • 2007
  • /
  • 1598-706X(pISSN)
  • /
  • 2288-8381(eISSN)
한국주조공학회 (Korea Foundry Society)
권호 표지

Ti-6.0wt%Al-4.0wt%V 합금 용탕의 금형 주조

Permanent Mold Casting of Ti-6.0wt%Al-4.0wt%V Alloy Melt

  • 강장원 (한국생산기술연구원 신소재본부) ;
  • 김명용 (한국조폐공사 주화연구실) ;
  • 이상길 (한국생산기술연구원 신소재본부) ;
  • 이해중 (한국생산기술연구원 신소재본부) ;
  • 김경훈 (한국생산기술연구원 신소재본부) ;
  • 이효수 (한국생산기술연구원 신소재본부) ;
  • 임성철 (한국생산기술연구원 신소재본부) ;
  • 권혁천 (한국생산기술연구원 신소재본부)
  • Kang, Jang-Won (Adv. Mater. Div., Korea Institute of Industrial Technology) ;
  • Kim, Myung-Yong (Korea Minting & Security Printing Corporation) ;
  • Lee, Sang-Kil (Adv. Mater. Div., Korea Institute of Industrial Technology) ;
  • Lee, Hae-Jung (Adv. Mater. Div., Korea Institute of Industrial Technology) ;
  • Kim, Kyung-Hoon (Adv. Mater. Div., Korea Institute of Industrial Technology) ;
  • Lee, Hyo-Soo (Adv. Mater. Div., Korea Institute of Industrial Technology) ;
  • Lim, Sung-Chul (Adv. Mater. Div., Korea Institute of Industrial Technology) ;
  • Kwon, Huck-Chon (Adv. Mater. Div., Korea Institute of Industrial Technology)
  • 발행 : 2007.05.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

To produce higher quality of titanium casting at a lower cost, the new titanium casting technology by using a permanent metal mold was developed and applied to fabricate hip joint for biomedical application. The present study was carried out to investigate the reactivity and fluidity of the Ti-6.0 wt%Al-4.0 wt%V alloy with metal mold by applying various ceramic powders coating on the mold surface. The molten titanium for manufacturing hip joint was poured into steel mold. No reaction layer was formed on the surface of specimens fabricated steel mold coated with $Y_2O_3$ powder.

키워드

참고문헌

  1. Y. Okazaki, T. Tateishi, K. Kyo and Y. lto: J. Japan Inst. Metals: Effect or Small Quantity of Oxygen and Nitrogen on Mechanical Properties of New Titanium alloys for Medical Implants 62(2) (1998) 207-214 https://doi.org/10.2320/jinstmet1952.62.2_207
  2. D. Kuroda, M. Niinomi, M. Morinaga, Y. Kato, T. Yashiro : Design and mechanical properties of new ${\beta}$ type titanium alloys for implant materials, A243, (1998) 244-249
  3. J. A. Davidson, A. K. Mishra, P. Kovacs, R. A. Poggie : BioMed. Mater. Eng. 4(1994) 231-243
  4. P. R. Beeley and R. F. Smart, Investment casting, P. 1, The University Press Cambridge (1995)
  5. M. Semliysch, H. Weber and R. Steger: 15Year's Experience with Ti-6AI-7Nb Alloy for Joint Replacements, Titanium 95 science and technology,(1995) 1742-1759
  6. S. Y. Sung, Ms Thesis, Sungkyunkwan University, P. 32 (2001)
  7. R. L. Saha, T. K. Handy, R. D. K. Misra and K. T. Jacob: Metall. Trans. B 21B (1990)