초록
최근, 국내에서는 물량절감과 경제성 확보를 목적으로 변단면 부재의 적용이 활발히 이루어지고 있으나 재료비선형을 이용한 설계방법으로는 취성파괴의 문제점에 대한 명확한 해결책을 제시하지 못하고 있으며, 변단면 부재의 초기변형, 폭두께비, 웨브 스티프너, 횡지지 거리등에 관한 연구가 부족한 실정이다. 따라서 본 연구에서는 기존에 연구된 이론식과 재료 및 기하 비선형 해석으로 신뢰성이 입증된 범용 유한요소 해석 프로그램인 ANSYS 9.0을 이용하여 춤이 큰 변단면 H형 보의 해석 모델을 완성하고 실험결과를 바탕으로 판-폭두께비와 비지지거리를 주요변수로 좌굴 및 극한내력을 평가하여, 웨브의 판폭두께비가 클 경우 좌굴내력이 감소하며, 횡 비지지 거리를 짧게 할 경우 연성능력을 향상시킬수 있음을 확인 하였다.
Recently, in the domestic amount of materials,curtailment and economic efficiency security by purpose, tapered beam application is achieved, but the architectural design technology of today based on the material non-linear method does not consider solutions to problems such as brittle fracture. So, geometric non-linear evaluation thatincludes initial deformation, width-thickness ratio, web stiffener and unbraced length is required. Therefore, in this study, we used ANSYS, a proven finite elementanalysis program,and material and geometric non-linear analysis to study existing and completed tapered H-section as deep beam's analysis model. Main parameters include the width-thickness ratio of web, stiffener, and flange brace, with the experimental result obtained by main variable buckling and limit strength evaluation. We made certain that a large width-thickness ratio of the web decreases the buckling strength and short unbraced web significantly improves ductility.