Journal of Korea Foundry Society (한국주조공학회지)

Korea Foundry Society (한국주조공학회)
권호 표지

Development of In-Ladle Direct Thermal Control Rheocasting for light alloys

경량합금을 위한 In-Ladle DTC Rheocasting 개발

  • Kim, Shae-K. (Adv. Mater. Div., Korea Institute of Industrial Technology) ;
  • Lee, Jin-Kyu (Adv. Mater. Div., Korea Institute of Industrial Technology) ;
  • Ha, Seong-Ho (Adv. Mater. Div., Korea Institute of Industrial Technology) ;
  • Jo, Hyung-Ho (Adv. Mater. Div., Korea Institute of Industrial Technology)
  • Published : 2007.01.20
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. D. B. Spenser, R. Mehrabian and M. C. Flemings: Metall. Trans., 'Rheological Behavior of Sn-15 pct Pb in the Crystallization Range', 3 (1972) 1925-1932 https://doi.org/10.1007/BF02642580
  2. M. C. Flemings: Metall. Trans., 'Behavior of Metal Alloys in Semi-Solid State', 22A (1991) 957-980
  3. D. H. Kirkwood: Inter. Met. Rev., 'Semisolid Metal Processing', 39 (1994) 173-189 https://doi.org/10.1179/095066094790150946
  4. S. K. Kim, C. H. Shin, T. W. Hong, H. G. Yoo, G. D. Kim and Y. J. Kim: Proc. of 3rd Symp. on Semisolid Forming Technology, 'High Temperature Semi-solid Forming of Fe alloys' (1999) 185-192
  5. S. K. Kim and Y. J. Kim: J. Jor. Inst. Met.&Mater., 'Control of liquid fraction and microstructure of semisolid AZ91D Mg alloy slurry', 38 (2000) 1620-1625
  6. S. K. Kim: Ph. D. Thesis, Sungkyunkwan University, Korea, 'Microstructural evolution and thixoforming behavior of magnesium alloys, magnesium composites and tool steels' (2001)
  7. P. W. Willson, T. Z. Kattamis and Y. Shiohara: Mater. Sic., 'Coaresning during solidification of aluminium-copper alloys', 23 (1998) 2882-2892
  8. W. R. Lone and M. Suery : Mater. Sci. Eng A 'Microstructural evolution during partial remelting Al-Si7Mg alloys' A203 (1995) 1-13 https://doi.org/10.1007/BF02908268
  9. Ube Industries Ltd., Japan: European patent, #EPO 745 694 A1, Dec. 4 (1996)
  10. J. Jorstad, M. Thieman and R. Kamm : Proc. of 8th Int'l Conf. of Semi-Solid Processing of Alloys and Composites, 'Fundamental requirements for slurry generation in the sub liquidus casting process and the economics of SLCTM processing' (2004) paper# 07-1
  11. J. A. Yurko, R. A. Martinez and M. C. Flemings: Proc. of 8th Int'l Conf. of Semi-Solid Processing of Alloys and Composites, ' SSRTM: The spheroidal growth route to semi-solid forming' (2004) paper# 02-1
  12. Q. Y. Pan, M. Findon and D. Apelian: Proc. of 8th Int'l Conf. of Semi-Solid Processing of Alloys and Composites, 'The continuous rheoconversion process (CRP) : A novel SSM approach' (2004) paper# 02-4
  13. G. A. Chadwick, T. J. Hughel and G. F. Bolling: ASM, Metals Park (1969) 99
  14. D. A. Porter and K. E. Easterling: Phase Transformation in Metals and Alloys (1981) 133
  15. M. Gunduz and J. D. Hunt : Acta Metall., 33 (1985) 1651-1672 https://doi.org/10.1016/0001-6160(85)90161-0
  16. M. Gunduz and J. D. Hunt : Acta Metall., 37 (1989) 1839-1845 https://doi.org/10.1016/0001-6160(89)90068-0
  17. M. C. Flemings and R. A. Martinez: Solid State Phenomena, 'Principles of Microstructural Formation in Semi-Solid Metal Processing', 116-117 (2006) 1-8 https://doi.org/10.4028/www.scientific.net/SSP.116-117.1
  18. J. K. Lee, Y. J. Kim, S. K. Kim and H. H. Jo: J. Kor. Foundrymen's Soc., 'In-Ladle Direct Thermal Control Rheocasting of A356 Al alloy', 25 (2005) 254-258
  19. D. Brabazon, D. J. Browne and A. J. Carr: Mater. Sci. Eng., 'Experimental Investigation of the Transient and Steady Rheological Behaviour of Al-Si Alloys in the Mushy State', 356 (2003) 69-80 https://doi.org/10.1016/S0921-5093(03)00158-8