Abstract
The two major objectives of acoustical measurements in a cavitation tunnel are measuring the noise levels generated by rotating propellers behind a hull and localizing possible noise sources in order to reduce noise levels. Propeller noise measurement experiments were performed in MOERI cavitation tunnel at December, 2006. In order to put the propeller into cavitating conditions, a wake-generating dummy body was devised. In addition, ten hydrophones are put inside a wing-shaped casing in order to minimize the unexpected flow induced self noise around hydrophone itself. After measuring both of the noises of the rotating propeller behind the dummy body and signals generated by a virtual source, respectively the data were matched field processed using the frequency incoherent Bartlett processor to localize noises on the propeller plane. In this paper, we presented the measured noise analysis and the localization results.
캐비테이션 터널에서 소음계측 실험의 주 목적은 프로펠러 소음레벨 계측과 소음원의 위치 판별이다. 한국해양연구원의 소음계측 실험용 "저소음 대형 캐비테이션 터널"의 기초연구의 일환으로 소음계측 실험이 동 연구원의 소형 캐비테이션 터널에서 수행되었다. 본 실험에서는 프로펠러 캐비테이션이 발생할 수 있는 반류조건을 만들기 위해 반류 생성용 모형체(dummy body)를 제작하였고, 유동장 내의 청음기에 의한 자체소음을 줄이기 위해 유선형으로 설계된 하이드로포일내에 청음기 배열을 설치하였다. 다양한 압력조건에서 발생한 소음장과 가상 음원의 복제음장을 계측한 후, 소음원의 위치를 추적하기 위해 주파수 비상관 Bartlett 프로세서를 적용하였다. 본 논문에서는 수행된 소음계측 시험에 대해 기술하고, 계측된 소음의 분석 및 위치추적 결과를 제시한다.