References
- Kim, H. G., Kang, Y. W. and Kim, Y. S., 2004, 'Fundamental Study on Performance Analysis and Design of Fuel Cell Vehicle,' Proceedings of the KSMTE Spring Conference 2004, pp. 178-183
- Scholta. J., Rohland. B. and Trapp. V., 1999, 'Investigation on Novel Low-cost Graphite Composite Bipolar Plate,' Journal of Power Sources, 84, pp. 231-234 https://doi.org/10.1016/S0378-7753(99)00322-5
- Patil, G. and Pandit, M., 1996, 'Alternative Fuels in Future Vehicles,' Automotive Engineering, pp. 39-43
- Barbir, F., 1998, 'Technical Challenges in PEM Fuel Cell Development,' Proceedings of the 12th World Hydrogen Energy Conference Buenos Aires, Argentina, 21-25. Vol. 2. pp. 1717-1726
- Oh, I. H., 2002, 'PEMFC Technique of Vehicle Power,' HYUNDAI Fuel Cell Workshop, pp. 97-114
- Kim, H. G., Nah, S. C., Kim, S. C., Kang, Y. W., Yang, G. E., Lee, H. K. and Choi, M. C., 2004, 'A Study on the Dynamic Analysis in the Shaft of Turbo-Blower for Fuel Cell,' KSMTE, Vol. 13, pp. 81-87
- Kim, H. G., Kang, Y. W. and Yu, G. H., 2003, 'A Study on the Vehicle Dynamics Design of Mini-BAJA Driven by Battery,' Journal of the Institute for Engineering and Technology, Vol. 9, No. 1, pp. 41-48
- Kim, H. G., Kang Y. W. and Yu G. H., 2003, 'A Study on the Motor Control System Driven by Battery,' Proceedings of the KSMTE Fall Conference 2003, pp. 195-200
- Bernardi, D. M. and Verbrugge, M. W., 1991, 'Mathematical Model of a Gas Diffusion Electrode Bonded to a Polymer Electrolyte,' AIChe Journal, 37, pp. 1151-1163 https://doi.org/10.1002/aic.690370805
- Fuller, T. F. and Newman, J., 1993, 'Water and Thermal Management in Solid Polymer Electrolyte Fuel Cells,' J. Electrochem. Soc.140., 1218 https://doi.org/10.1149/1.2220960
- Laurencelle, F., Chahine, R., Hamelin, J., Agbosssou, K., Fournier, M., Bose, T. K. and Laperriere, A., 2001, 'Characterization of a Ballard MK5-E Proton Exchange Membrane Fuel Cell Stack,' Fuel Cells, No. 1, pp. 66-71
- Jiang, R. and Chu, D., 2001, 'Stack Design and Performance of Polymer Electrolyte Membrane Fuel Cells,' Journal of Power Sources, Vol. 93, No. pp. 1-2 https://doi.org/10.1016/S0378-7753(00)00504-8
- Blomen, L. and Mugerwa, M. N., 1993, Fuel Cell Systems, Plenum Press
- Kim, H. G., Kim, Y. S. and Kang, Y. W., 2005, 'Electric Voltage and Current Characteristics of Fuel Cell for Machine Tool Power Supply,' KSMTE, Vol. 14, pp. 1-7
- Comsol Inc., 2003, Comsol Multiphysics, Burlington, MA, USA
- Kim, H. G., Kim, Y. S. and Zheng, S., 2007, 'Simulation of Unit Cell Performance in the Polymer Electrolyte Membrane Fuel Cell,' International Journal of Automotive Technology, in Press