References
- Fanous, I.F.Z., Younan, M.Y.A., and Wifi, A.S., 2003, '3-D Finite Element Modeling of the Welding Process Using Element Birth and Element Movement Techniques,' Journal of ASME, Vol. 125, pp. 144-150 https://doi.org/10.1115/1.1564070
- Im, D.Y, Kim, N.I, Lee, J.S., Lee, H.W and Choi, W.H, 2005. 'A Study on Weldability and Strength of 5000 Aluminium Alloy,' Proc. Welding Strength Committee Symposium, Korean Welding Society
- Kim, J.T., Ha, Y.S. and Jang, C.D., 2006, 'Analysis of Post Weld Deformation at HAZ by External Forces Based on Inherent Strain,' Journal of Society of Naval Architecture of Korea, Vol. 43, No. 2, pp. 220-227 https://doi.org/10.3744/SNAK.2006.43.2.220
- Kim, S.I., 2004, 'Development of Simple Prediction Model for V-groove Butt Welding Deformation,' Journal of Society of Naval Architecture of Korea, Vol. 41, No. 2, pp. 106-113 https://doi.org/10.3744/SNAK.2004.41.2.106
- Kim, S.I., 2006, 'Control of Welding Distortion for Thin Panel Block Structure Using Mechanical Tensioning Method,' Journal of Society of Naval Architecture of Korea, Vol. 43, No. 1, pp. 68-74 https://doi.org/10.3744/SNAK.2006.43.1.068
- Lee, J.S., 2004, 'Simulator for Weld-Induced Deformation of Panel Blocks,' Journal of Society of Naval Architecture of Korea, Vol. 41, No. 1, pp. 55-63 https://doi.org/10.3744/SNAK.2004.41.5.055
- Li, Y., Wang, J., Chen, M. and Shen, X, 2004, 'Finite Element Analysis of Residual Stress in the Welded Zone of a High Strength Steel,' Bulletine of Material Science, Vol. 27, No. 2, pp. 127-132, Indian Academy of Science https://doi.org/10.1007/BF02708494
- Masubuchi, K., 1980, Analysis of Welded Structure, Pergamon Press, Oxford
- Michaleris, P. and DeBiccari, A., 1997, 'Prediction of Welding Distortion,' Welding Journal, Vol. 76, No. 4, pp. 172s-180s
- Mollicone, P., Camilleri, D., Gray, T.G.F. and Comlekci, T., 2006, 'Simple Thermo-Elastic-Plastic Models for Welding Distortion Simulation,' Journal of Materials Processing, Vol. 176, Issues 1-3, pp. 77-86 https://doi.org/10.1016/j.jmatprotec.2006.02.022
- Song, H.C., Jo, Y.C. and Jang, C.D., 2004, 'Numerical Analysis and Experimental Verification of Relaxation and Redistribution of Welding Residual Stresses,' Journal of Society of Naval Architecture of Korea, Vol. 41, No. 6, PP. 84-90 https://doi.org/10.3744/SNAK.2004.41.6.084
- Teng, T.L., Fung, C.P., Chang, P.H and Yang, W.C., 2001, 'Analysis of Residual Stresses and Distortions in T-joint Fillet Welds,' Journal of ASME, Vol. 78, po. 523-538 https://doi.org/10.1016/S0308-0161(01)00074-6
- Tsirkas, S.A, Papanikos, P. and Kermanidis, T., 2003, 'Numerical Simulation of the Laser Welding Process in Butt-Joint Specimens,' Journal of Materials Processing Technology, Vol. 134, pp. 59-69 https://doi.org/10.1016/S0924-0136(02)00921-4