DOI QR코드

DOI QR Code

EVA 개질 고강도 콘크리트의 강도 및 수밀 특성

Strength and Watertightness Properties of EVA Modified High Strength Concrete

  • Kim, Young-Ik (Institute of Agricultural Science, Chungnam National University) ;
  • Sung, Chan-Yong (Division of Bio-Resources Engineering, College of Agriculture and Life Sciences, Chungnam National University)
  • 발행 : 2007.01.31

초록

This study was performed to evaluate strength and watertightness properties of EVA modified high strength concrete in order to improve durability of concrete used in agricultural water utilization facilities that are in constant contact with water. Materials used were cement, coarse and fine aggregates, silica fume, EVA and AE water reducing agent. Tests for the slump, compressive and flexural strengths, absorption ratio and permeability coefficient according to curing condition (water and water+dry curing) and content ratio of EVA were performed. The slump results of EVA modified high strength concrete similarly showed in the content ratio of EVA powder less than 4% and decreased in the content ratio of EVA powder more than 6% compared to that of concrete without EVA powder. The compressive strength of EVA modified high strength concrete decreased with increasing the content ratio of EVA powder. The flexural strength of EVA modified high strength concrete increased with increasing the content ratio of EVA powder in the content ratio of EVA powder ratio less than 4% and had similar or slightly decreased in the content ratio of EVA powder more than 6% compared to that of concrete without EVA powder. The absorption ratio and permeability coefficient of EVA modified high strength concrete decreased with increasing the content ratio of EVA powder in the content ratio of EVA powder less than 4% and slightly increased in the content ratio of EVA powder more than 6%.

키워드

참고문헌

  1. Cook, R. A. and K. C. Hover., 1999. Mercury porosimetry of hardened cement pastes, Cement and Concrete Research 29(6): 933-943 https://doi.org/10.1016/S0008-8846(99)00083-6
  2. Jenni, A., L. Holzer., R. Zurbriggen. and M. Herwegh., 2005. Influence of polymers on microstructure and adhesive strength of cementitious tile adhesive mortars, Cement and Concrete Research 35(1): 35-50 https://doi.org/10.1016/j.cemconres.2004.06.039
  3. Khatri. R. P. and V. Sirivivatnanon, 1995. Effect of different supplementary cementitious materials on mechanical properties of high performance concrete, Cement and Concrete Research 25(1): 209-220 https://doi.org/10.1016/0008-8846(94)00128-L
  4. Larbi, J. A. and J. M. Bijen., 1990. Interaction of polymers with portland cement during hydration: a study of the chemistry of the pore solution of polymer-modified cement systems, Cement and Concrete Research 20(1) : 139-147 https://doi.org/10.1016/0008-8846(90)90124-G
  5. Roncero, J., S. Valls. and R. Gettu., 2002, Study of the influence of superplasticizers on the hydration of cement paste using nuclear magnetic resonance and X-ray diffraction techniques, Cement and Concrete research 32(1): 103-108 https://doi.org/10.1016/S0008-8846(01)00636-6
  6. Schulze, J., 1999. Influence of water-cement ratio and cement content on the properties of polymer-modified mortars, Cement and Concrete Research 29(6): 909- 915 https://doi.org/10.1016/S0008-8846(99)00060-5
  7. Schulze, J. and O. Killermann., 2001. Long-term performance of redispersible powders in mortars, Cement and Concrete Research 31(3): 357-362 https://doi.org/10.1016/S0008-8846(00)00498-1
  8. Silva. D. A., V. M. John., J. L. D. Ribeiro. and H. R. Roman., 2001. Pore size distribution of hydrated cement pastes modified with polymers, Cement and Concrete Research 31(8): 1177-1184 https://doi.org/10.1016/S0008-8846(01)00549-X
  9. Silva. D. A. and P. J. M. Monteiro, 2005, ESEM analysis of polymeric film in EVA-modified cement paste, Cement and Concrete Research 35(10): 2,047-2,050 https://doi.org/10.1016/j.cemconres.2004.10.037
  10. Swamy, R. N., 1986, Cement replacement materials (concrete technology and design), Surrey University Press: 171-196
  11. Sakai, K., N. Banthia and O. E. Giorv., 1995, Concrete under severe conditions(environment and loading), E & FN Spon: 1675-1683

피인용 문헌

  1. Mechanical Properties and Durability of Abrasion of EVA Concrete Reinforced Steel Fiber vol.56, pp.5, 2014, https://doi.org/10.5389/KSAE.2014.56.5.045