Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Creep-Life Prediction and Its Error Analysis by the Time Temperature Parameters and the Minimum Commitment Method

시간-온도 파라미터법과 최소구속법에 의한 크리프 수명예측과 오차 분석

  • Published : 2007.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

To predict long-term creep life from short-term creep life data, various parametric methods such as Larson-Mille. (L-M), Orr-Sherby-Dorn (O-S-D), Manson-Haferd (M-H) parameters, and a Minimum Commitment Method (MCM) were suggested. A number of the creep data were collected through literature surveys and experimental data produced in KAERI. The polynomial equations for type 316LN SS were obtained by the time-temperature parameters (TTP) and the MCM. Standard error (SE) and standard error of mean (SEM) values were obtained and compared with the each method for various temperatures. The TTP methods showed good creep-life prediction, but the MCM was much superior to the TTP ones at $700^{\circ}C$ and $750^{\circ}C$. It was found that the MCM were lower in the SE values when compared to the TTP methods.

Keywords

References

  1. Kim, W. G., Yoon, S. N., Ryu, W. S. and Yi, W., 2005, 'Creep-Life Prediction and Standard Error Analysis of Type 316LN Stainless Steel by Time-Temperature Parametric Methods,' Trans. of the KSME, (A), Vol. 29, No. 1, pp. 74-80 https://doi.org/10.3795/KSME-A.2005.29.1.074
  2. Kim, W. G., Kim, S. H. and Ryu, W. S., 2002, 'Evaluation of Monkman-Grant Parametersfor Type 316LN and Modified 9Cr-Mo StainlessSteels,' KSME Int. J., Vol.16, No. 11, pp. 420-1427
  3. Viswantanathan, R., 1989, 'Damage Mechanisms and Life Assessment of High-Temperature Components,' ASM International, pp. 59-70
  4. Penny, R. K. and Marriott, D. L., 1955, 'Design Creep,' Chapman & Hall, pp. 206-248
  5. VAMAS Data Evaluation Committee, 1994, 'Study on Standardization of Creep-Rupture Data Evaluation of Metals,' Iron and Steel Institute of Japan, pp. 9-51
  6. Nam, S. W., 1997, 'Measurement and Application of Creep Properties,' Bulletion of the Korean Inst. of Met. & Mat., Vol. 10, No. 3, pp. 223-246
  7. Le May, I., 1979, 'Developments in Parametric Methods for Handling Creep and Creep-Rupture Data,' Transactions of the ASME, Vol. 101, pp. 326-330 https://doi.org/10.1115/1.3450968
  8. Kim, W. G., Yin, S. N. and Ryu, W. S., 2005, 'Application and Standard Error Analysis of the Parametric Methods for Predicting the Creep Life of Type 316LN SS,' Key Engineering Materials, Vols. 297-300, pp. 2272-2277 https://doi.org/10.4028/www.scientific.net/KEM.297-300.2272
  9. Manson, S. S. and Ensign, C. R., 1978, 'Interpolation and Extrapolation of Creep Rupture Data by the Minimum Commitment Method,' Characterization of Materials for Service at Elevated Temperatures MPC-7 ASME New York, pp. 299-398
  10. Manson, S.S. and Ensign, C.R., 1971, 'Specialized Model for Analysis of Creep Rupture Data by the Minimum Commitment Method, Station-Function Approach,' NASA TM, X-52999, pp. 1-14
  11. W. E. White and Iain Le May, 1978, 'On the Minimum-Commitment Method for Correlation of Creep-Rupture Data,' Journal of Engineering Materials and Technology, Vol. 100, pp. 333-335 https://doi.org/10.1115/1.3443498
  12. Kazuya, K., Shingo, D., Kenichi, T., Masayuki, S., Nobuchika, K. and Yoshihiko, T., 1999, 'Material Strength Standard of 316FR Stainless Steel and Modified 9Cr-1Mo Steel,' Advances in Life Prediction Methodology-ASME, PVP, Vol. 391, pp. 47-54
  13. Liska, M., Vodarek, V., Sobotkova, M. and Sobotka, J., 1990, 'Precipitation Behavior and Creep Rupture Properties of CrNi(Mo)N Austenitic Steels,' High Nitrogen Steels HNS, Vol. 90, pp. 78-83
  14. Mathew, M. D., Sasikala, G., Bhanu Sankara Rao, K. and Mannan S. L., 1991, 'Influence of Carbon and Nitrogen on the Creep Properties of Type 316 Stainless Steel at 873K,' Materials Science and Engineering, (A), Vol. 148, pp. 253-260 https://doi.org/10.1016/0921-5093(91)90827-A

Cited by

  1. Creep Curve Modeling to Generate the Isochronous Stress-Strain Curve of Type 316LN Stainless Steel vol.385-387, pp.1662-9795, 2008, https://doi.org/10.4028/www.scientific.net/KEM.385-387.705
  2. Suggestion and Evaluation of a Multi-Regression Linear Model for Creep Life Prediction of Alloy 617 vol.33, pp.4, 2009, https://doi.org/10.3795/KSME-A.2009.33.4.366
  3. Taylor Series-Based Long-Term Creep-Life Prediction of Alloy 617 vol.34, pp.4, 2010, https://doi.org/10.3795/KSME-A.2010.34.4.457