International Journal of Precision Engineering and Manufacturing

  • 제8권1호
  • /
  • Pages.27-31
  • /
  • 2007
  • /
  • 2234-7593(pISSN)
  • /
  • 2005-4602(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

Effect of Rolling Speed on the Exit Cross Sectional Shape in Rod Rolling Process

  • 발행 : 2007.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A rolling speed dependent spread model is proposed for predicting the exit cross sectional shape in oval-round (or round-oval) pass rod rolling process when the rolling speed is very high. The effect of rolling speed on the exit cross sectional shape is measured by performing a four-pass continuous high speed (${\sim}80m/s$) rod rolling test and is described in terms of the spread correction parameter. The validity of the model is examined by applying it to rod rolling process at POSCO No.3 Rod Mill. The cross sectional shapes of workpiece predicted by the proposed model coupled with the surface profile prediction $method^{6}$ are in good agreement with those obtained experimentally.

키워드

참고문헌

  1. Park, J. J. and Oh, S. I., 'Application of three-dimensional finite element analysis to shape rolling processes,' ASME Trans, Journal of Engineering for Industry, Vol. 112, pp. 36-46, 1990 https://doi.org/10.1115/1.2899293
  2. Karhausen, K., Kopp, K. and De Souza, M. M., 'Numerical simulation method for designing thermomechanical treatments, illustrated by bar rolling,' Scandinavian Journal of Metallurgy, Vol. 20, No.6, pp. 351-363, 1991
  3. Shin, W., Lee, S. M., Shivpuri, R. and Altan, T., 'Finite-slab element investigation of square-to-round multi-pass shape rolling,' Journal of Materials Processing Technology, Vol. 2, No.1, pp. 141-154, 1992
  4. Komori, K., 'Simulation of deformation and temperature in multipass caliber rolling,' Journal of Materials Processing Technology, Vol. 71, No.2, pp. 329-336, 1997 https://doi.org/10.1016/S0924-0136(97)00094-0
  5. Kim, H. J., Kim, T. H. and Hwang, S. M., 'A New Free Surface Scheme for Analysis of Plastic Deformation in Shape Rolling,' Journal of Materials Processing Technology, Vol. 2, No.1, pp. 81-93, 2000
  6. Shinokura, T. and Takai, K. A., 'A New method for calculating spread in rod rolling,' Proceeding of experimental verification of process models, ASM, Cincinati, USA, pp. 175-188, 1983
  7. Lee, Y. and Choi, S., 'New Approach for the Prediction of Stress Free Surface Profile of Workpiece in Rod Rolling,' ISIJ International, Vol. 40, No.6, pp. 624-626, 2000 https://doi.org/10.2355/isijinternational.40.624
  8. Lee, Y. and Goldhahn, G., 'Prediction Model of the Exit Cross Sectional Shape in Round-Oval-Round Pass Rolling,' Int. J. Korean Society of Precision Engineering, Vol. 2, No.1, pp. 87-93, 2001