Journal of the Korea Concrete Institute (콘크리트학회논문집)

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Application of Concentrated FRP Bars to Enhance the Capacity of Two-Way Slabs

2방향 슬래브의 성능 향상을 위한 집중 배근된 FRP 바의 적용

  • Lee, Joo-Ha (Dept. of Civil Environmental and Architectural Engineering, Korea University) ;
  • Yang, Jun-Mo (Dept. of Civil Environmental and Architectural Engineering, Korea University) ;
  • Yoon, Young-Soo (Dept. of Civil Environmental and Architectural Engineering, Korea University)
  • 이주하 (고려대학교 건축사회환경공학과) ;
  • 양준모 (고려대학교 건축사회환경공학과) ;
  • 윤영수 (고려대학교 건축사회환경공학과)
  • Published : 2007.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The influence of the differences in the physical and mechanical properties between fiber-reinforced polymer (FRP) and conventional steel, concentrated reinforcement in the immediate column region, as well as using steel fiber-reinforced concrete (SFRC) in the slab near the column faces, on the punching behavior of two-way slabs were investigated. The punching shear capacity, stiffness, ductility, strain distribution, and crack control were investigated. Concentrating of the slab reinforcement and the use of SFRC in the slab enhanced the punching behavior of the slabs reinforced with glass fiber-reinforced polymer (GFRP) bars. In addition the test results of the slabs with concentrated reinforcement were compared with various code equations and the predictions proposed in the literature specifically for FRP-reinforced slabs. An appropriate method for determining the reinforcement ratio of slabs with a banded distribution was also investigated to allow predictions to properly reflect the benefit of the slab reinforcement concentration.

철근과 fiber-reinforced polymer (FRP)의 물리적, 역학적 특성의 차이 및 슬래브 상부 보강재의 기둥 인접부 집중 배근, 그리고 기둥 인접부 슬래브에 강섬유 콘크리트 (SFRC)의 타설 등에 따른 2방향 슬래브의 펀칭 전단 거동에 대한 효과를 평가하였다. 펀칭 전단강도, 강성, 연성, 변형률 분포 그리고 균열 제어 성능 등을 파악하였다. 실험 결과 기둥 인접부의 슬래브에 집중 배근을 하거나 SFRC를 타설하는 것은 glass fiber-reinforced polymer (GFRP) 바로 보강된 슬래브의 펀칭 전단 거동을 향상시켰다. 기둥 인접 구역에 집중 배근된 슬래브의 실험 결과를 다양한 설계기준과 타 연구자에 의해 제안된 예측식과 비교하였으며, 집중 배근으로 인한 이점을 예측식에 반영할 수 있도록 집중 배근된 슬래브의 철근비를 산정하는 합리적인 방법도 제안하였다.

Keywords

References

  1. Japan Society of Civil Engineers (JSCE), 'Recornmendation for Design and Construction of Concrete Structures Using Continuous Fiber Reinforcing Materials', Concrete Engineering Series 23, A. Machida, ed., Tokyo, Japan, 1997, 325pp
  2. Canadian Standards Association (CSA), 'Design and Construction of Building Components with Fibre Reinforced Polymers', CAN/CSA S806-02, Mississauga, Ont., Canada, 2002, 206pp
  3. American Concrete Institute, Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars, ACI 440.1R-06, Farmington Hill, Mich., 2006, 44pp
  4. Hawkins, N. M. and Mitchell, D., 'Progressive Collapse of Flat Plate Structures', ACI Struct. J., Vol.76, No.7, 1979, pp.775-808
  5. Ghannoum, C. M., Effect of High-Strength Concrete on the Performance of Slab-Column Specimens, M. Engrg. Thesis, Dept. of Civil Engineering and Applied Mechanics, McGill Univ., Montreal, Canada, 1998, 91pp
  6. McHarg, P. J., Cook, W. D., Mitchell, D., and Yoon, Y. S., 'Benefits of Concentrated Slab Reinforcement and Steel Fibers on Performance of Slab-column Connections', ACI Struct. J., Vol.97, No.2, 2000, pp.225-234
  7. Yoon, Y. S., Lee, J. H., Lee, S. H., and Mitchell, D., 'Enhanced Transmission of Ultra-High-Strength Concrete Column Loads in Slab-Column Connection Using Steel Fibers', In: Proceedings of the Third International Conference on Construction Materials-Performance, Innovations and Structural Implications, CONMAT '05, Vancouver, Canada, 2005, CD Rom Paper 1, Session 68
  8. Canadian Standards Association (CSA), 'Design of Concrete Structures', CSA A23.3-04, Mississauga, Ont., Canada, 2004, 258pp
  9. British Standard Institution (BSI), Structural Use of Concrete, Standard BS 8110, London, United Kingdom, 1997, 168pp
  10. Banthia, N., Al-Asaly, M., and Ma, S., 'Behavior of Concrete Slabs Reinforced with Fiber-Reinforced Plastic Grid', Journal of Materials in Civil Engineering, Vol.7, No.4, 1995, pp.252-257 https://doi.org/10.1061/(ASCE)0899-1561(1995)7:4(252)
  11. V-ROD Composite Reinforcing Rods Technical Data Sheet, Pultrall Inc., Thetford Mines, Canada, 2003, 1pp
  12. El-Ghandour, A. w., Pilakoutas, K., and Waldron, P., 'Punching Shear Behavior of Fiber Reinforced Polymers Reinforced Concrete Flat Slabs: Experimental Study', Journal of Composites for Construction, Vol.7, No.3, 2003, pp.258-265 https://doi.org/10.1061/(ASCE)1090-0268(2003)7:3(258)
  13. Matthys, S. and Taerwe, L., 'Concrete Slabs Reinforced with FRP Grids. II: Punching Resistance', Journal of Composites for Construction, Vol.4, No.3, 2000, pp.154-161 https://doi.org/10.1061/(ASCE)1090-0268(2000)4:3(154)
  14. American Concrete Institute, 'Building Code Requirements for Structural Concrete and Commentary', ACI 318-05 and ACI 318R-05, Farmington Hill, Mich., 2005, 430pp
  15. European Standard, Eurocode 2: Design of Concrete Structures-Part 1: General Rules and Rules for Buildings, prEN 1992-1-1, Final Draft, European Committee for Standardization, Brussels, 2003, 226pp
  16. Ospina, C. E., Alexander, S. D. B., and Roger Cheng, J. J., 'Punching of Two-Way Concrete Slabs with Fiber-Reinforced Polymer Reinforcing Bars or Grids', ACI Struct. J., Vol.100, No.5, 2003, pp.589-598
  17. El-Gamal, S., El-Salakawy, E. F., and Benmokrane, B., 'A New Punching Shear Equation for Two-Way Concrete Slabs Reinforced with FRP Bars', 7th International Symposium on Fiber-Reinforced (FRP) Polymer Reinforcement for Concrete Structures, SP-230, C. K. Shield et al., ed., American Concrete Institute, Farmington Hill, Mich., 2005, pp.877-894

Cited by

  1. Flexural Behavior of FRP Bar Reinforced HSC Beams with Different Types of Reinforcing Bar and Fiber vol.23, pp.3, 2011, https://doi.org/10.4334/JKCI.2011.23.3.273