초록
본 연구에서는 폴리머 개질 페이스트의 응결 시간, 건조수축, 강도, 동결융해저항성 및 흡수율에 미치는 결합재량 및 알루미나 분말 혼입량의 영향에 대하여 검토하였다. 그 결과, SBR 및 PAE폴리머 개질 페이스트의 응결 시간은 결합재량이 증가함에 따라 지연되는 경향을 보였다. 폴리머 종류에 관계없이 SBR PAE 폴리머 개질 페이스트의 건조수축은 결합재량 및 알루미나 분말 혼입량이 증가함에 따라 감소하는 경향을 나타내었다. 폴리머 종류에 관계없이 SBR 및 PAE 폴리머 개질 페이스트의 인장 및 부착강도는 결합재량 및 알루미나 분말 혼입량이 증가함에 따라 증가하는 경향을 나타냈다. SBR 및 PAE 폴리머 개질 페이스트의 내구성 지수는 폴리머 종류에 관계없이, 알루미나 분말 혼입량의 증가에 따라 증가하는 경향을 보였다. 폴리머 종류에 관계없이 SBR 및 PAE 폴리머 개질 페이스트의 흡수율은 결합재량 및 알루미나 분말 혼입량이 증가함에 따라 감소하는 경향을 나타내었다.
The effects of binder and alumina content on the setting time, drying shrinkage, strength, freezing and thawing resistance and water absorption of polymer-modified pastes with alumina powder were examined. As a result the setting time of the polymer-modified pastes with alumina powder tended to delay with increasing binder content. Irrespective of the type of polymer, the drying shrinkage of the polymer-modified pastes with alumina powder tended to decrease with increasing binder content and alumina powder content. Regardless of the type of polymer, the tensile and adhesion strengths of the polymer-modified pastes with alumina powder tended to increase with increasing binder content and alumina powder content. Irrespective of the type of polymer, the durability factors of the polymer-modified pastes with alumina powder tended to increase with increasing alumina content. Irrespective of the type of polymer, the water absorptions of the polymer-modified pastes with alumina powder tended to decrease with increasing binder content and alumina content.