초록
경사 보강근이 철근콘크리트 연속 깊은 보의 구조적 거동에 미치는 영향을 파악하기 위하여 내부 전단경간에 개구부를 갖는 연속 깊은 보 12개가 실험되었다. 주요 변수는 개구부 크기와 경사 보강근 양이다. 개구부 주위의 경사 보강근 양과 개구부 크기의 영향을 동시에 고려하기 위한 유효 경사 보강근 계수가 제시되었다. 실험 결과 개구부를 갖는 연속 깊은 보의 하중 분배, 경사균열 폭 및 치대 내력은 유효 경사 보강근 계수에 의해 결정되었다. 유효 경사 보강근 계수가 클수록 경사균열 폭 및 이들의 진전 속도는 낮았다. 특히 유효 경사 보강근 계수가 0.077 이상인 보의 최대 내력은 동일 개구부 없는 보의 것에 비해 높았다. 내부 전단경간에 개구부를 갖는 연속 깊은 보의 최대 내력을 평가하기 위하여 상계치 이론을 이용한 수치해석 모델이 제시되었다. 제시된 모델로부터 얻은 최대 내력은 실험 결과와 잘 일치하였다.
Twelve reinforced concrete continuous deep beams having web openings within interior shear spans were tested to failure. All beams tested had the same geometrical dimensions. The main variables investigated were the opening size and amount of inclined reinforcement around openings. An effective inclined reinforcement factor combining the influence of the opening size and amount of inclined reinforcement on the structural behavior of the beams tested is proposed. It was observed that the load distribution, diagonal crack width, and load capacity of beams tested were greatly dependent on the effective inclined reinforcement factor which ranged from 0 to 0.171 for the test specimens. The higher this factor, the smaller the diagonal crack width and its development rate. A higher load capacity also developed in beams having effective inclined reinforcement factor above 0.077 than in the corresponding solid deep beams. A numerical technique based on the upper bound analysis of the plasticity theory is proposed to evaluate the load capacity of continuous deep beams having openings within interior shear spans. Predictions obtained from the proposed formulas are in good agreement with test results.