전기전자학회논문지 (Journal of IKEEE)
- 제11권4호
- /
- Pages.235-238
- /
- 2007
- /
- 1226-7244(pISSN)
- /
- 2288-243X(eISSN)
The Research of Deep Junction Field Ring using Trench Etch Process for Power Device Edge Termination
- 발행 : 2007.12.31
초록
2차원 소자 시뮬레이터인 TMA 메디치를 이용하여 필드링와 깊은 접합 필드링에 대해 연구하였다. 이온 주입될 위치를 미리 트랜치 식각을 시킴으로써 항복전압 특성을 향상시킬 수 있었다. 시뮬레이션 결과 기존 필드링의 항복전압대비 깊은 접합 필드링 항복전압은 약 30%의 증가를 보였다. 깊은 접합 필드링은 같은 면적을 차지하는 조건하에서 설계 및 제작이 비교적 용이하고, 표면 전하의 영향도 적은 것으로 나타났다. 본 논문에서는 여러 분석을 통해 깊은 접합 필드링의 향상된 특성을 논하였다.
The planar edge termination techniques of field-ring and deep junction field-ring were investigated and optimized using a two-dimensional device simulator TMA MEDICI. By trenching the field ring site which would be implanted, a better blocking capability can be obtained. The results show that the p-n junction with deep junction field-ring can accomplish near 30% increase of breakdown voltage in comparison with the conventional field-rings. The deep junctionfield-rings are easy to design and fabricate and consume same area but they are relatively sensitive to surface charge. Extensive device simulations as well as qualitative analyses confirm these conclusions.