한국표면공학회지 (Journal of the Korean institute of surface engineering)

  • 제40권6호
  • /
  • Pages.262-270
  • /
  • 2007
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지
DOI QR코드

DOI QR Code

해수 환경하에서 알루미늄합금(5083F)의 외부전원법에 의한 최적 방식전위 결정에 관한 연구

Investigation on Optimum Protection Potential Decision of Al Alloy(5083F) in Sea Water by Impressed Current Cathodic Protection

  • 발행 : 2007.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, there has been a new appreciation of aluminum alloys as materials that are capable of reducing the environment load. This is because aluminum alloys are lightweight, easy to recycle, permit miniaturization, and have environmental friendly properties. In this study, we investigated the mechanical and electrochemical properties of 5083F aluminum alloys using slow strain rate test(SSRT) and potentiostatic tests under various potential conditions. In the potentiostatic tests, the current density in the potential range from -0.7 to -1.4V after 1,200 s was low. After considering the results of the potentiostatic tests, maximum tensile strength, yield strength, elongation, time-to-fracture, observation of fractured specimen and fractography analysis, the optimum protection potential range was between -1.3 and -0.7V(Ag/AgCl).

키워드

참고문헌

  1. S. J. Kim, S. K. Jang, Materials Science Forum, 510-511 (2006) 162
  2. S. J. Kim, J. Y. Ko, The Korean Journal of Chemical Engineering, 23(5) (2006) 847 https://doi.org/10.1007/BF02705939
  3. 강병윤, 조제형, 대한용접학회, 22(3) (2004) 39
  4. 김성종, 고재용, 마린엔지니어링학회, 30(1) (2006) 157
  5. 김성종, 마린엔지니어링학회, 30(5) (2006) 14
  6. 한국선급, 선급 및 강선규칙 제2편 재료 및 용접 (2004) 79
  7. S. J. Kim, Materials Science Forum, 510-511 (2006) 158
  8. 전대희, 부식과 방식의 관리, 일중사 (1985) 316
  9. S. J. Kim, J. Y. Ko, M. S. Han, The Korean Journal of Chemical Engineering, 23(6) (2006) 1028 https://doi.org/10.1007/s11814-006-0025-z
  10. S. J. Kim, S. K. Jang, The 56th Annual Meeting of the International Society of Electrochemistry, Busan, Korea (2005) 751
  11. S. J. Kim, K. M. Moon, Metals and Materials International, 8(4) (2002) 395 https://doi.org/10.1007/BF03186113
  12. S. J. Kim, Masazumi. Okido, K. M. Moon, Surface and Coatings Technology, 169-170 (2003) 163 https://doi.org/10.1016/S0257-8972(03)00219-6
  13. S. J. Kim, Masazumi Okido, K. M. Moon, The Korean Journal of Chemical Engineering, 20(3) (2003) 560 https://doi.org/10.1007/BF02705566
  14. S. J. Kim, K. M. Moon, Metals and Materials International, 8(4) (2002) 387 https://doi.org/10.1007/BF03186112
  15. S. J. Kim, J. K. Kim, J. H. Kim, M. H. Lee, Y. S. Kim, K. M. Moon, Journal of the Korean Society of Marine Engineers, 24(4) (2000) 68
  16. S. J. Kim, K. M. Moon, Metals and Materials International, 8(4) (2002) 395 https://doi.org/10.1007/BF03186113
  17. S. J. Kim, K. M. Moon, Metals and Materials International, 8(4) (2002) 387 https://doi.org/10.1007/BF03186112
  18. S. J. Kim, M. Okido, K. M. Moon, The Korean Journal of Chemical Engineering, 20(3) (2003) 560 https://doi.org/10.1007/BF02705566
  19. S. J. Kim, M. Okido, K. M. Moon, Surface and Coatings Technology, 169-170 (2003) 163 https://doi.org/10.1016/S0257-8972(03)00219-6
  20. S. J. Kim, S. C. Ko, J. S. Park, 2007 European Materials Research Society, Poland (2007), 117
  21. C. Deslouis, D. Festy, O. Gil, G. Rius, S. Touzain, B. Tribollet, Electrochimica Acta, 43(12-13) (1998) 1891 https://doi.org/10.1016/S0013-4686(97)00303-4
  22. Anne Neville, Arnaud P. Morizot, Journal of Crystal Growth, 243 (2002) 4890
  23. C. Deslouis, D. Festy, O. Gil, V. Maillot, S. Touzain, B. Tribollet, Electrochimica Acta, 45 (2000) 1837 https://doi.org/10.1016/S0013-4686(99)00403-X
  24. L. J. Simpson, Electrochimica Acta, 43(16-17) (1998) 2543 https://doi.org/10.1016/S0013-4686(97)10167-0
  25. Ch. Barchiche et al., Electrochimica Acta, 48 (2003) 1645 https://doi.org/10.1016/S0013-4686(03)00075-6

피인용 문헌

  1. Evaluation on Damage Behavior of Al-4.5%Mg-0.6%Mn Al Alloy with Potentiostatic Experiment Time vol.18, pp.6, 2012, https://doi.org/10.7837/kosomes.2012.18.6.569
  2. Investigation on surface hardening and corrosion characteristic by water cavitation peening with time for Al 5052-O alloy vol.11, pp.4, 2012, https://doi.org/10.14773/cst.2012.11.4.151