비파괴검사학회지 (Journal of the Korean Society for Nondestructive Testing)

  • 제27권6호
  • /
  • Pages.541-549
  • /
  • 2007
  • /
  • 1225-7842(pISSN)
  • /
  • 2287-402X(eISSN)
한국비파괴검사학회 (The Korean Society for Nondestructive Testing)
권호 표지

Health Monitoring of a Composite Actuator with a PZT Ceramic during Electromechanical Fatigue Loading

  • Woo, Sung-Choong (Artificial Muscle Research Center, Konkuk University) ;
  • Goo, Nam-Seo (Smart Microsystem Research Laboratory, Department of Advanced Technology Fusion, Artificial Muscle Research Center and Smart Robot Center, Konkuk University)
  • 발행 : 2007.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This work describes an investigation into the feasibility of using an acoustic emission (AE) technique to evaluate the integrity of a composite actuator with a PZT ceramic under electromechanical cyclic loading. AE characteristics have been analyzed in terms of the behavior of the AE count rate and signal waveform in association with the performance degradation of the composite actuator during the cyclic tests. The results showed that the fatigue cracking of the composite actuator with a PZT ceramic occurred only in the PZT ceramic layer, and that the performance degradation caused by the fatigue damage varied immensely depending on the existence of a protecting composite bottom layer. We confirmed the correlations between the fatigue damage mechanisms and AE signal types for the actuators that exhibited multiple modes of fatigue damage; transgranular micro damage, intergranular fatigue cracking, and breakdown by a short circuiting were related to a burst type signal showing a shortly rising and slowly decaying waveform with a comparably low voltage, a continuous type signal showing a gradual rising and slowly decaying waveform with a very high voltage and a burst and continuous type signal with a high voltage, respectively. Results from the present work showed that the evolution of fatigue damage in the composite actuator with a PZT ceramic can be nondestructively identified via in situ AE monitoring and microscopic observations.

키워드

참고문헌

  1. Chung, S. W., Hwang, I. S. and Kim, S. J. (2006) Large-Scale Actuating Performance Analysis of a Composite Curved Piezoelectric Actuator, Smart Materials and Structures, Vol. 15, pp. 213-220 https://doi.org/10.1088/0964-1726/15/1/051
  2. Eitzen, D. G. and Wadley, H. N. G. (1984) Acoustic Emission: Establishing the Fundamentals, Journal of Research of the National Bureau of Standards, Vol. 89, pp. 75-100 https://doi.org/10.6028/jres.089.008
  3. Liu, T., Oates, W. S., Wan, S. and Lynch, C. S. (2005) Crack Initiation at Electrode Edges in PZN-4.5%PT Single Crystals, Journal of Intelligent Material Systems and Structures, Vol. 16, pp. 373-379 https://doi.org/10.1177/1045389X05050099
  4. Mizuno, M. and Honda, Y. (2005) Simplified Analysis of Steady-State Crack Growth of Piezoelectric Ceramics Based on the Continuum Damage Mechanics, Acta Mechanica, Vol. 179, pp. 157-168 https://doi.org/10.1007/s00707-005-0254-y
  5. Mossi, K., Mouhli, M., Smith, B. F., Mane, P. P. and Bryant, R. G. (2006) Shape Modeling and Validation of Stress-Biased Piezoelectric Actuators, Smart Materials and Structures, Vol. 15, pp. 1785-1793 https://doi.org/10.1088/0964-1726/15/6/033
  6. Schwartz, R. E. and Narayanan, M. (2002) Development of High Performance Stress-Biased Actuators through the Incorporation of Mechanical Pre-Loads, Sensors and Actuators A, Vol. 101, pp. 322-331 https://doi.org/10.1016/S0924-4247(02)00263-7
  7. White, G. S., Raynes, A. S., Vaudin, M. D. and Freiman, S. W. (1994) Fracture Behavior of Cyclically Loaded PZT, Journal of the American Ceramic Society, Vol. 77, pp. 2603-2608 https://doi.org/10.1111/j.1151-2916.1994.tb04649.x
  8. Woo, S. C. and Goo, N. S. (2006) Analysis of the Fracture Behavior of Plate-type Piezoelectric Composite Actuators by Acoustic Emission Monitoring, Journal of the Korean Society for Nondestructive testing, Vol. 26, pp. 220-230
  9. Woo, S. C. and Choi, N. S. (2007) Analysis of Fracture Process in Single-Edge-Notched Laminated Composites Based on the High Amplitude Acoustic Emission Events, Composites Science and Technology, Vol. 67, pp. 1451-1458 https://doi.org/10.1016/j.compscitech.2006.07.022
  10. Woo, S. C. and Goo, N. S. (2007a) Prediction of Actuating Displacement in a Piezoelectric Composite Actuator with a Thin Sandwiched PZT Plate by a Finite Element Simulation, Journal of Mechanical Science and Technology, Vol. 21, pp. 455-464 https://doi.org/10.1007/BF02916307
  11. Woo, S. C. and Goo, N. S. (2007b) Influences of Dome Height and Stored Elastic Energy on the Actuating Performance of a Plate-Type Piezoelectric Composite Actuator, Sensors and Actuators A, Vol. 137, pp. 110-119 https://doi.org/10.1016/j.sna.2007.01.018
  12. Woo, S. C. and Goo, N. S. (2007c) Analysis of the Bending Fracture Process for Piezoelectric Composite Actuators Using Dominant Frequency Bands by Acoustic Emission, Composites Science and Technology, Vol. 67, pp. 1499-1508 https://doi.org/10.1016/j.compscitech.2006.07.023
  13. Woo, S. C. and Goo, N. S. (2007d) Identification of Failure Mechanisms in a Smart Composite Actuator with a Thin Sandwiched PZT Plate Based on Waveform and Primary Frequency Analyses, Smart Materials and Strnctures, Vol. 16, pp. 1460-1470 https://doi.org/10.1088/0964-1726/16/4/061
  14. Zhang, X. D. and Sun, C. T. (1999) Analysis of a Sandwich plate Containing a Piezoelectric Core, Smart Materials and Structures, Vol. 8, pp. 31-­40 https://doi.org/10.1088/0964-1726/8/1/003
  15. Zhang, X. P., Galea, S., Ye, L. and Mai, Y. W. (2004) Characterization of the Effects of Applied Electric Fields on Fracture Toughness and Cyclic Electric Field Induced Fatigue Crack Growth for Piezoceramic PIC 151, Smart Materials and Structures, Vol. 13, pp. N9-N16 https://doi.org/10.1088/0964-1726/13/1/N03