한국해양공학회지 (Journal of Ocean Engineering and Technology)

  • 제21권6호
  • /
  • Pages.101-106
  • /
  • 2007
  • /
  • 1225-0767(pISSN)
  • /
  • 2287-6715(eISSN)
한국해양공학회 (Korean Society of Ocean Engineers)
권호 표지

내압용기 모형의 설계, 제작 및 압력시험에 관한 연구

Study on the Design, Manufacture, and Pressure Test of a Pressure Vessel Model

  • 정태환 (호주플린더스대학교, 정보통신 및 공과대학) ;
  • 이재환 (충남대학교, 선박해양공학과) ;
  • 이종무 (한국해양연구원, 해양개발시스템연구본부) ;
  • ;
  • ;
  • 노인식 (충남대학교, 선박해양공학과)
  • Joung, Tae-Hwan (School of Informatics and Engineering, Flinders University) ;
  • Lee, Jae-Hwan (Dept. of Naval Architecture and Ocean Engineering, Chungnam National University) ;
  • Lee, Chong-Moo (Ocean Development System Laboratory, KORDI) ;
  • Hykudome, Tadahiro (Marine Technology Department, Japan Agency for Marine-earth Science and Technology (JAMSTEC)) ;
  • Sammut, Karl (School of Informatics and Engineering, Flinders University) ;
  • Nho, In-Sik (Dept. of Naval Architecture and Ocean Engineering, Chungnam National University)
  • 발행 : 2007.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, the authors demonstrate a new idea to take the place of the real pressure vessel test, which should be carried out in a high pressure experiment unit before the real sea trial test. The idea is to make a pressure vessel model as a replica of the real pressure vessel test, which can reduce the cost of making a pressure vessel and large pressure experiment unit. The pressure vessel model was designedbased on linear-elastic, buckling equations and Finite Element Analysis. The manufactured pressure vessel model was investigated and monitored while the pressure test was being conducted. After the test, the result and the validity of the pressure vessel model as a replica of the real pressure vessel test was studied.

키워드

참고문헌

  1. 신잔용, 우종식 (1999). '심해용 압력용기에 대한 붕괴해석', 한국해양공학회지, 제13권 제4호, pp 82-97
  2. 일본기계학회 (1997). 기계공학편람사전 - 신판 제7판, pp A4-71
  3. 정태환 (2005). 구조신뢰성기반 심해용 무인잠수정의 설계 및 제작에 관한 연구, 충남대학교 대학원 박사학위 논문, pp 89-91
  4. ANSYS (1994). Verification manual 5.4, ANSYS Inc., pp 25.1-25.4
  5. Deepsea Power & Light (2001). Under Pressure 4.01 Manual, Deepsea Power & Light Co., pp E-4-6
  6. JAMSTEC (1991). Design criteria for 10,000m class deep-sea pressure vessel, Report of JAMCTEC (Japan Agency for Marine-Earth Science and Technology)
  7. Jeou, O. (1971). 'Strength of stiffened cylinder with a external high pressure,' J. of the Society of Naval Architects of Japan, Vol 490, pp 170-174
  8. Kyo, M, Miyazaki, E., Tsukioke, S., Ochi, H., Amitani, Y, Tsuchiya, T., Aoki, T. and Takagawa, S. (1995), '전해역 심도 조사용 ROV 'KAIKO'의 실해역 시험', Proceedings of Marine Technology & Science, IEEE Oeeans95, pp 1991-1996
  9. Timoshenko, S.P. and Woinowsky-Keieger, S. (1959), 'Theory of Plates and Shells - 2nd Edition', McGraw-Hill, pp 57, 282-308
  10. Young, W.C. (1989). Roark's Formulas for Stress & Strain, Sixth Edition, McGraw-Hill, pp 429, 519, 638-639, 690