The Effects of $Y_3Al_5O_{12}$ on the Mechanical Properties of Silicon Nitride

$Y_3Al_5O_{12}$ 첨가가 질화규소 세라믹스의 제조 및 그 기계적 특성에 미치는 영향

  • Noh, Sang-Hoon (Department of Materials Science and Engineering, Graduate School of Pukyong National University) ;
  • Moon, Chang-Kwon (Division of Materials Science and Engineering, Pukyong National University) ;
  • Jeong, Hae-Yong (Division of Materials Science and Engineering, Pukyong National University) ;
  • Seo, Won-Chan (Division of Materials Science and Engineering, Pukyong National University) ;
  • Yoon, Han-Ki (Department of Mechanical Engineering, Dong-Eui University) ;
  • Kim, Bu-Ahn (Division of Materials Science and Engineering, Pukyong National University)
  • 노상훈 (부경대학교 신소재공학부 대학원) ;
  • 문창권 (부경대학교 신소재공학부) ;
  • 정해용 (부경대학교 신소재공학부) ;
  • 서원찬 (부경대학교 신소재공학부) ;
  • 윤한기 (동의대학교 기계공학과) ;
  • 김부안 (부경대학교 신소재공학부)
  • Published : 2007.12.31

Abstract

In the present work, silicon nitride was fabricated with $Y_3Al_5O_{12}$ as a sintering additive and its mechanical properties were investigated. Silicon nitride with 3, 5, and 7wt% of $Y_3Al_5O_{12}$ was prepared and sintered by a Hot Pressing (HP) technique at 1750 and $1800^{\circ}C$ for 2 h. The process was performed under different process pressures of 30 and 45 MPa. Mechanical properties (density, strength, hardness, and fracture toughness) were investigated as a function of the $Y_3Al_5O_{12}$ content in $Si_3N_4$. $Si_3N_4\;-Y_3Al_5O_{12}$ ceramics showing similar mechanical properties compared with $Si_3N_4-Y_2O_3-Al_2O_3$ ceramics. But its high temperature strength was considerably higher than that of $Si_3N_4-Y_2O_3-Al_2O_3$ ceramics.

Keywords

References

  1. Clarke, D.R. and Thomas, G. (1978). 'Microstructure $Y_2O_3$, Fluxed Hot-pressed Silicon Nitride', Journal of American Ceramic Society, Vol 61, No 3-4, pp 114-118 https://doi.org/10.1111/j.1151-2916.1978.tb09251.x
  2. Jung, H.C., Yoon, H.K., Kim, B.A., Park, J.S. and Kohyama, A. (2005). 'Fracture Toughness of Liquid Phase Sintered SiC by Using Indentation Fracture Method', Key Engineering Materials, Vol 297-300, pp 137-142 https://doi.org/10.4028/www.scientific.net/KEM.297-300.137
  3. Lawn, B.R. and Fuller, E.R. (1975). 'Equilibrium Penny-like Cracks in Indentation Fracture', J. Mater. Sci., Vol 10, pp 2016 https://doi.org/10.1007/BF00557479
  4. Hirisaki, N., Akimune, Y. and Mitimo, M. (1994). 'Sintering of $Y_2O_3-Al_2O_3$, Doped ${\beta}-Si_3N_4$ Powder and Mechanical Properties of Sintered Materials', Journal of Ceramic Society, Japan, Vol 102, pp 791-795
  5. Sanders, W.A. and Mieskowski, D.M. (1985). 'Strength and Microstructure of Sintered $Si_3N_4$ with Rare-earth-oxide Additions', Ceramic Bulletin, Vol 64, No 2, pp 304-309
  6. Tsuge, A, Nishida, K. and Komatsu, M (1975). 'Effect of Crystallizing the Grain-boundary Glass Phase on the High-temperature Strength of Hot-pressed $Si_3N_4$ Containing $Y_2O_3$', Journal of American Ceramic Society., 58(7-8), pp 323-326 https://doi.org/10.1111/j.1151-2916.1975.tb18969.x
  7. Miyoshi, T., Sagwa, N. and Sassa, T. (1985), 'The Evaluation on the Fracture Toughness of Structural Ceramics', Journal of Japan Society of Mechanical Engineers, Vol 51, No 471, pp 60-11
  8. Liang, Y. and Dutta, S.P. (2001). 'Application Trend in Advanced Ceramics Technologies', Technovation, Vol 21, pp 61-65 https://doi.org/10.1016/S0166-4972(00)00019-5
  9. 김부안, 문창권 (2001). '세라믹스 파괴인성평가에 있어서 IF법과 AE', 한국해양공학회지, Vol 15, No 2, pp61-65
  10. 이상훈 (1995). 열기관용 세라믹 소재 및 부품 개발, 선도기술개발사업 제 1단계 3차년도 보고서, 한국화학연구소, pp 41