Compatibility of biodegradable poly (lactic acid) (PLA) and poly (butylene succinate) (PBS) blends for packaging application

  • Bhatia, Amita (Rheology and Materials Processing Centre, School of Civil, Environmental and Chemical Engineering, RMIT University) ;
  • Gupta, Rahul K. (Rheology and Materials Processing Centre, School of Civil, Environmental and Chemical Engineering, RMIT University) ;
  • Bhattacharya, Sati. N. (Rheology and Materials Processing Centre, School of Civil, Environmental and Chemical Engineering, RMIT University) ;
  • Choi, H.J. (Department of Polymer Science and Engineering, Inha University)
  • 발행 : 2007.11.30

초록

Biodegradable polymeric blends are expected to be widely used by industry due to their environmental friendliness and comparable mechanical and thermal properties. Poly (lactic acid) (PLA) and poly (butylene succinate) (PBS) are such biodegradable polymers which aim to replace commodity polymers in future applications. Since cost and brittleness of PLA is quite high, it is not economically feasible to use it alone for day to day use as a packaging material without blending. In this study, blends of PLA and PBS with various compositions were prepared by using a laboratory-scale twin-screw extruder at $180^{\circ}C$. Morphological, thermal, rheological and mechanical properties were investigated on the samples obtained by compression molding to explore suitability of these compositions for packaging applications. Morphology of the blends was investigated by scanning electron microscopy (SEM). Morphology showed a clear phase difference trend depending on blend composition. Modulated differential scanning calorimetry (MDSC) thermograms of the blends indicated that the glass transition temperature ($T_g$) of PLA did not change much with the addition of PBS, but analysis showed that for PLA/PBS blend of up to 80/20 composition there is partial miscibility between the two polymers. The tensile strength and modulus were measured by the Instron Universal Testing Machine. Tensile strength, modulus and percentage (%) elongation at break of the blends decreased with PBS content. However, tensile strength and modulus values of PLA/PBS blend for up to 80/20 composition nearly follow the mixing rule. Rheological results also show miscibility between the two polymers for PBS composition less than 20% by weight. PBS reduced the brittleness of PLA, thus making it a contender to replace plastics for packaging applications. This work found a partial miscibility between PBS and PLA by investigating thermal, mechanical and morphological properties.

키워드

참고문헌

  1. Bhari, K., H. Mitomo, T. Enjoji, F. Yoshii and K. Makuuchi, 1998, Radiation crosslinked poly (butylene succinate) foam and its biodegradation, Polymer Degradation Stability 62, 551-557 https://doi.org/10.1016/S0141-3910(98)00041-X
  2. Doi, Y., K. Kasuya, H. Abe, N. Koyama, S. Ishiwatara, K. Takagi and Y. Yoshida, 1996, Evaluation of biodegradabilities of biosynthetic and chemosynthetic polyesters in river water, Polymer Degradation Stability 51, 281-286 https://doi.org/10.1016/0141-3910(95)00178-6
  3. Doi, Y. and K. Fukuda, 1994, Biodegradable plastics and polymer, Studies in Polymer Science 12, Elsevier, 627
  4. Fujimura, T. and K. Iwakura, 1970, Int. Chem. Eng. 10, 683
  5. Fujimura, T. and K. Iwakura, 1974, Kobunshi Ronbunshu 31, 617 https://doi.org/10.1295/koron.31.617
  6. Gajria, A.M., V. Dave, R.A. Gross and S.P. McCarthy, 1996, Miscibility and biodegradability of blends of poly (lactic acid) and poly (vinyl acetate, Polymer 37, 437-444 https://doi.org/10.1016/0032-3861(96)82913-2
  7. Genillon, R. and J.F. May, 1978, 5th Conf. Europ. Plast.- Caoutch. Paris, paper E-12
  8. Huang, J.C., A.S. Shetty and M.S. Wang, 1990, Biodegradable plastics: a review, Advances in Polymer Technology 10, 23-30 https://doi.org/10.1002/adv.1990.060100103
  9. Lee, S. and J.W. Lee, 2005, Characterization and processing of biodegradable polymer blends of poly (lactic acid) with poly (butylene succinate adipate), Korea- Australia Rheology Journal 17, 71-77
  10. McCarthy, S.P., R.A. Gross and W. Ma, 1999, Polylactic acidbased blends, University of Massachusetts. U S Patent 5,883,199, Mar, 1999
  11. Nijienhuis, A.J., E. Colstee, D.W. Grijpma and A.J. Pennings, 1996, High molecular weight poly (L-lactide) and poly (ethylene oxide) blends: thermal characterization and physical properties, Polymer 37, 5849-5857 https://doi.org/10.1016/S0032-3861(96)00455-7
  12. Nishioka, M., T. Tuzuki, Y. Wanajyo, H. Oonami and T. Horiuchi, 1994, Japan Stud, Polym. Sci. 12, 584-590
  13. Ogata, N., G. Jimenez, H. Kawai and T.J. Ogihara, 1997, Structure and thermal/mechanical properties of poly (l-lactide)-clay blend, J of Polymer Science part B: Poly Phys. 35, 389- 396 https://doi.org/10.1002/(SICI)1099-0488(19970130)35:2<389::AID-POLB14>3.0.CO;2-E
  14. Perego, G., G.D. Cella, and C. Bastioli, 1996, Effect of molecular weight and crystallinity on poly (lactic) acid mechanical properties, J. of Appl. Polym. Sci. 59, 37-43 https://doi.org/10.1002/(SICI)1097-4628(19960103)59:1<37::AID-APP6>3.0.CO;2-N
  15. Prest, Jr. W.M. and R.S. Porter, 1972, Polym. Sci. Part A-2 10, 1639
  16. Qi, F. and M.A. Hanna, 1999, Rheological properties of amorphous and semicrystalline polylactic acid polymers, Industrials Crops and Products 10, 47-53 https://doi.org/10.1016/S0926-6690(99)00009-6
  17. Ramkumar, D.H.S. and M. Bhattacharya, 1998, Steady shear and dynamic properties of biodegradable polyesters, Polym. Eng. And Sci. 38, 1426-1435 https://doi.org/10.1002/pen.10313
  18. Ray, S.S. and M. Bousmina, 2005, Biodegradable polymers and their layered silicate nanocomposites: In greening the 21st century materials world, Progress in Materials Science 50, 962-1079 https://doi.org/10.1016/j.pmatsci.2005.05.002
  19. Roberts, R.C., 1970, The melting behaviour of bulk crystallized polymers, J. Polym. Sci. Part B: Polym. Letters 8, 381-384 https://doi.org/10.1002/pol.1970.110080512
  20. Sheth, M., R.A. Kumar, V. Dave, R.A. Gross and S.P. McCarthy, 1997, Biodegradable polymer blends of poly (lactic acid) and poly (ethylene glycol), J. of Appl. Polym. Sci. 66, 1495-1505 https://doi.org/10.1002/(SICI)1097-4628(19971121)66:8<1495::AID-APP10>3.0.CO;2-3
  21. Shin, T.K., J. Kim, H.J. Choi and M.S. John, 2000, Miscibility of biodegradable aliphatic polyester and poly (vinyl acetate) blends, J. of Appl. Polym. Sci. 77, 1348-1352 https://doi.org/10.1002/1097-4628(20000808)77:6<1348::AID-APP20>3.0.CO;2-Z
  22. Sweet, G.E. and J.P. Bell, 1972, Multiple endotherm melting behavior in relation to polymer morphology, J. Polym Sci. Part A-2: Polymer Physics 10, 1273-1283 https://doi.org/10.1002/pol.1972.160100707
  23. Tsuji, H. and Y. Ikada, 1996, Blends of isotactic and atactic poly (lactide)s: 2. Molecular-weight effects of atactic component on crystallization and morphology of equimolar blends from the melt, Polymer 37, 595-602 https://doi.org/10.1016/0032-3861(96)83146-6
  24. Utracki, L.A., 1983, Melt flow of polymer blends, Polym. Eng. and Sci. 23, 602-609 https://doi.org/10.1002/pen.760231103
  25. Zhang L., C. Xiong and X. Deng, 1995, Biodegradable polymer blends for biomedical application, J. Appl. Polym. Sci. 56, 103-112 https://doi.org/10.1002/app.1995.070560114