References
- Bushko, W. C. and V. K. Stokes, 1995, Solidification of thermoviscoelastic melts. part II: effects of processing conditions on shrinkage and residual stresses, Polym. Eng. Sci., 35, 365-383 https://doi.org/10.1002/pen.760350410
- Bushko, W. C. and V. K. Stokes, 1996, Solidification of thermoviscoelastic melts. part III: effects of mold surface temperature differences on warpage and residual stress, Polym. Eng. Sci., 36, 322-335 https://doi.org/10.1002/pen.10419
- Chiang, H. H., K. Himasekhar, N. Santhanam and K. K. Wang, 1993, Integrated simulation of fluid flow and heat transfer in injection molding for the prediction of shrinkage and warpage, J. of Engineering Materials and Technology, 113, 37-47
- Courtney, T. H.., 1999, Mechanical behavior of materials, McGraw-Hill, International Editions
- Jansen, K. M. B., D. J. Van Dijk and M.. H.. Husselman, 1998, Effect of processing conditions on shrinkage in injection molding, Polym. Eng. Sci., 38, 838-846 https://doi.org/10.1002/pen.10249
- Jung, J. H., S. W. Lee and J. R. Youn, 1999, Characterization of deformation in injection molded parts after packing and cooling, Macromolecular Symposia, 148, 263-283
- Kim, S. K., S. W. Lee and J. R. Youn, 2002, Measurement of residual stresses in injection molded short fiber composites considering anisotropy and modulus variation, Korea-Aust. Rheol. J. 14, 107-114
- Manzione, L. T., 1987, Application of computer aided engineering in injection molding, Hanser Publishers, Munich
- Mlekusch, B., 2001, Calculation of residual stress development in injection molding using a nonlinear viscoelastic model, Mechanics of Time-Dependent Materials, 5, 101-118 https://doi.org/10.1023/A:1011495516180
- Santhanam, N., H. H. Chiang, K. Himasekhar, P. Tuschak and K. K. Wang, 1991/1992, Postmolding and load-induced deformation of plastic parts in the injection molding process, Advances in Polymer Technology, 11(2), 77-89 https://doi.org/10.1002/adv.1991.060110201
- Sweeney, J., T. L. D. Collins, P. D. Coates and R.A. Duckett, 1999, High-temperature large strain viscoelastic behavior of PP modeled using an inhomogeneously strained network, J. Appl. Polym. Sci., 72, 563-575 https://doi.org/10.1002/(SICI)1097-4628(19990425)72:4<563::AID-APP13>3.0.CO;2-#
- Treuting, R.G. and W. T. Read, 1951, A mechanical determination of biaxial residual stress in sheet materials, J. Appl. Phys., 22, 130-134 https://doi.org/10.1063/1.1699913
- Turnbull, A., A. S. Maxwell and S. Pillai, 1999, Residual stress in polymers - evaluation of measurement techniques, J. of Materials Science, 34, 451-459 https://doi.org/10.1023/A:1004574024319
- Youn, J. R., C. Kim, S. H. Kim and H. Oh, 2005, Residual stress in injection molded polystyrene parts, Theories and Applications of Rheology, Proceedings of the Fall Meeting of the Korean Society of Rheology, 9(2), 15-18, Seoul National University
- Zhang, X., X. Cheng and K. A. Stelson, 2002, Approximate model of thermal residual stress in an injection molded part, J. of Thermal Stresses, 25, 523-538 https://doi.org/10.1080/01495730290074270
- Zoetelief, W. F., L. F. Douven and A. J. Ingenhousz, 1996, Residual thermal stresses in injection molded products, Polym. Eng. and Sci., 36, 1886-1896 https://doi.org/10.1002/pen.10585