DOI QR코드

DOI QR Code

SiC가 코팅된 그라파이트 Foam의 제조 및 특성 분석

Preparation and Characterization of SiC Coated Graphite Foam

  • Kyung, Jae-Jin (Eco-Materials Team, Korea Institute of Ceramic Engineering and Technology) ;
  • Kim, Jung-Ju (Eco-Materials Team, Korea Institute of Ceramic Engineering and Technology) ;
  • Kim, Soo-Ryong (Eco-Materials Team, Korea Institute of Ceramic Engineering and Technology) ;
  • Kwon, Woo-Teck (Eco-Materials Team, Korea Institute of Ceramic Engineering and Technology) ;
  • Cho, Kwang-Youn (Eco-Materials Team, Korea Institute of Ceramic Engineering and Technology) ;
  • Kim, Young-Hee (Eco-Materials Team, Korea Institute of Ceramic Engineering and Technology)
  • 발행 : 2007.11.30

초록

Graphite is widely used in electronic industry due to its excellent electrical and thermal properties. However, graphite starts to oxidize around $400^{\circ}C$ that seriously degrades its properties. SiC coating can be applied to graphite foam to improve its high temperature oxidation resistance. In this research, SiC coating on graphite foam was made via preceramic polymer using a polyphenylcarbosilane. 20% of polyphenylcarbosilane in hexane solution was coated onto graphite by dip coating method. Thermal oxidation was carried out at $200^{\circ}C$ for crosslink of the preceramic polymer and the sample were pyrolysized at $800^{\circ}C{\sim}1200^{\circ}C$ under nitrogen to convert the preceramic polymer to SiC film. The microstructure of the SiC coating after pyrolysis was investigated using FESEM and oxidation resistance up to $800^{\circ}C$ was evaluated.

키워드

참고문헌

  1. J. Klett, R.Hardy, E. Romine, C. Walls, and T. Burchell, 'High Thermal Conductivity Mesophase Pitch Derived Carbon Foams :Effect of Precursor on Structure and Properties,' Carbon, 38 [7] 953-73 (2000) https://doi.org/10.1016/S0008-6223(99)00190-6
  2. F. Zhiqiang, T. Chunhe, and L. Tongxiang, 'Structure of SiC Coating from Polycarbosilane on Graphite for Fuel Element Matrix of High Temperature Gas-cooled Reactor,' Surf. Coat. Tech., 200 3950-54 (2006) https://doi.org/10.1016/j.surfcoat.2005.04.005
  3. J. Zhao, L. Liu, Q. Guo, J. Shi, and G. Zhai., 'Oxidation Protective Behavior of SiC/Si-MoSi2 Coating for Different Graphite Matrix,' Mater. Lett., 60 [16] 1964-67 (2006) https://doi.org/10.1016/j.matlet.2005.12.072
  4. F. Zhiqiang, L. Tongxang, R. J. Charles, and T. Chunhe, 'The Stability of SiC Coating and $SiO_2/SiC$ Multiplayer on the Surface of Graphite for HTGRs at Normal Service Condition,' Appl. Surf. Sci., 240 [1-4] 349-54 (2005) https://doi.org/10.1016/j.apsusc.2004.07.007
  5. O.S. Kwon, S. H. Hong, and H. Kim, 'The Improvement in Oxidation Resistance of Carbon by a Graded $SiC/SiO_2$ Coating,' J. Eur. Ceram. Soc., 23 [16] 3119-24 (2003) https://doi.org/10.1016/S0955-2219(03)00098-0
  6. R. Liu, C. Zhang, X. Zhou, and Y. Cao, 'Structural Analysis of Chemical Vapor Deposited ${\beta}-SiC$ Coatings from $CH_3SiCl_3-H_2$ Gas Precursor,' J. Cryst. Growth, 270 [1-2] 124-27 (2004) https://doi.org/10.1016/j.jcrysgro.2004.06.005
  7. Y. Kim, D. G. Shin, H. R. Kim, H. S. Park, and D. H. Riu, 'Preparation of Polycarbosilane using a Catalytic Process and Its Practical Uses,' Key Eng. Mater., 287 108-11 (2005) https://doi.org/10.4028/www.scientific.net/KEM.287.108

피인용 문헌

  1. Step-Growth Polymerization of Poly(phenylcarbosilane) and Its Structural and Physical Properties vol.22, pp.2, 2012, https://doi.org/10.1007/s10904-011-9624-1