DOI QR코드

DOI QR Code

An Experimental Study on the Flow Characteristics with the Impinging Angles of Defrost Nozzle Jet Inside a Vehicle Passenger Compartment

차실내 Defrost 노즐 분류의 충돌각 변화에 따른 유동특성에 관한 실험적 연구

  • 김덕진 (자동차부품연구원 환경부품연구센터) ;
  • 김현주 (삼성전자(주)) ;
  • 노병준 (전북대학교 기계항공시스템공학부) ;
  • 이지근 (전북대학교 기계항공시스템공학부)
  • Published : 2007.12.01

Abstract

The flow characteristics with the impinging angles of defrost nozzle jet inside a commercial vehicle passenger compartment were investigated experimentally by using the two-dimensional duct-nozzle model. The shape of the nozzle contraction was designed according to the curved line of cubic equation to the vertical plan of the flow direction. The impinging angles, defined as the angle between nozzle axis and a vertical line to the windshield, were varied from the $0^{\circ}\;to\;80^{\circ}$. The mean velocity distributions, the half-widths, and the momentum distributions with the cases of both the free jet and the impinging jet onto the dummy windshield were measured. The impinging jet flows similarly with wall jet from $X/b_o=20$, and the impinging angle has an effect on the half-width of the impinging jet. The momentum distributions onto the windshield increased with the increase of impinging angle, and then their inflection point was observed around the impinging angle of $60^{\circ}$.

Keywords

References

  1. 'Surface Vehicle Recommended Practice,' SAE J902, April 1993
  2. 'Surface Vehicle Recommended Practice,' SAE J381, April 1994
  3. 'Surface Vehicle Recommended Practice,' SAE J382, June 1994
  4. Kim, C. J. and Kim J. B., 1993, 'Investigation of Bus Duct System for Optimum Cooling Performance,' SAE Technical Papers, IPC-7-1993
  5. Park, W. G., Park, M. S. and Jang, K. L., 2006, 'Flow and Temperature Analysis within Automobile Cabin Discharged Hot Air From Defrost Nozzle,' International Journal of Automotive Technology, Vol. 7, No. 2, pp. 139-143
  6. Hur, N. G. and Cho, W. K., 1993, '3-D Numerical Simulation of Flow Inside a Passenger Compartment of a Model Vehicle for Hearting, Air-Conditioning and Defrosting Modes,' Transactions of KSAE, Vol. 1, No. 2, pp. 60-68, SAE NO.933751
  7. Kim, D. H., Lee, J. I., Roh, S. K. and Lee, M. S., 1995, 'Performance Improvement of Automotive Defrost Duct Using CFD,' Proceedings of KSAE Spring Conference, pp.177-185
  8. Tollmien, W., 1926, 'Berechung Turbulenter Ausberi Tungsvorgange,' ZAMM 6, pp.468-478 https://doi.org/10.1002/zamm.19260060604
  9. Gortler, H., 1957, 'A New Series for the Calculation of Steady Laminar Boundary Layer Flow,' J. of Math., Vol. 16, p. 1
  10. Hinze, J. O., 1959, 'Turbulence,' McGraw-Hill, New York
  11. Bradbury, L. J. S., 1965, 'The Structure of a Self-Preserving Turbulent Plane Jet,' Journal of Fluid Mechanics, Vol. 23, part 1, pp. 31-64 https://doi.org/10.1017/S0022112065001222
  12. Flora Jr., J. J. and Gildschmidt, V. W., 'Virtual Origins of a Free Plane Turbulent Jet,' Journal of AIAA, Vol. 7, pp. 2344-2346 https://doi.org/10.2514/3.5543
  13. Wygnanski, I. and Fiedler, H., 1969, 'Some Measurements in the Self-Preserving Jet,' Journal of Fluid Mechanics, Vol. 38, part 3, pp. 577-612 https://doi.org/10.1017/S0022112069000358
  14. Schwarz, W. H. and Cosart, W. P., 1961, 'The Two-dimensional Turbulent Wall Jet,' Journal of Fluid Mechanics, Vol. 10, pp. 481-495 https://doi.org/10.1017/S0022112061000299
  15. Bakke, P., 1957, 'An Experimental Investigation of a Wall Jet,' Journal of Fluid Mechanics, Vol. 2, pp. 467-472 https://doi.org/10.1017/S0022112057000270
  16. Poreh, M., Tsuei, Y. G. and Cermak, J. E., 1967, 'Investigation of a Turbulent Radial Wall Jet,' Trans ASME, Journal of Applied Mechanics, pp. 457-463
  17. Verhoff, A., 1963, 'The Two-dimensional Turbulent Wall Jet with and without an External Stream,' Princeton University
  18. Forthmann, E., 1936, 'Turbulent Jet Expansion,' N.A.C.A. TM-789
  19. Rho, B. J. and Kim, J. K., 1984, 'An Experimental Study on the Characteristics of the Turbulent Flow in 45$^{\circ}$ Cross Jet,' Transactions of KSME, Vol. 8, No. 5, pp. 442-499

Cited by

  1. Numerical Study on the Performance Assessment for Defrost and De-Icing Modes vol.35, pp.2, 2011, https://doi.org/10.3795/KSME-B.2011.35.2.161